Study of hexane adsorption in nanoporous MCM-41 silica

We study here the adsorption of hexane on nanoporous MCM-41 silica at 303,313, and 323 K, for various pore diameters between 2.40 and 4.24 nm. Adsorption equilibria, measured thermogravimetrically, show that all the isotherms, that are somewhat akin to those of type V, exhibit remarkably sharp capillary adsorption phase transition steps and are reversible. The position of the phase transition step gradually shifts from low to high relative pressure with an increase in the temperature as well as the pore sizes. The isosteric heats of adsorption derived from the equilibrium information using the Clapeyron equation reveal a gradual decrease with increasing adsorbed amount because of the surface heterogeneity but approach a constant value near the phase transition. A decrease in the pore size results in an increase in the isosteric heat of adsorption because of the increased dispersion forces. A simple strategy, based on the Broekhoff and De Boer adsorption theory, successfully interprets the hexane adsorption isotherms for the different pore size MCM-41 samples. The parameters of an empirical expression, used to represent the potential of interaction between the adsorbate and adsorbent, are obtained by fitting the monolayer region prior to capillary condensation and the experimental phase transition simultaneously, for some pore sizes. Subsequently, the parameters are used to predict the adsorption isotherm on other pore size samples, which showed good agreement with experimental data.     

Tractable molecular theory of transport of Lennard-Jones fluids in nanopores

We present here a tractable theory of transport of simple fluids in cylindrical nanopores, which is applicable over a wide range of densities and pore sizes. In the Henry law low-density region the theory considers the trajectories of molecules oscillating between diffuse wall collisions, while at higher densities beyond this region the contribution from viscous flow becomes significant and is included through our recent approach utilizing a local average density model. The model is validated by means of equilibrium as well nonequilibrium molecular dynamics simulations of supercritical methane transport in cylindrical silica pores over a wide range of temperature, density, and pore size. The model for the Henry law region is exact and found to yield an excellent match with simulations at all conditions, including the single-file region of very small pore size where it is shown to provide the density-independent collective transport coefficient. It is also shown that in the absence of dispersive interactions the model reduces to the classical Knudsen result, but in the presence of such interactions the latter model drastically overpredicts the transport coefficient. For larger micropores beyond the single-file region the transport coefficient is reduced at high density because of intermolecular interactions and hindrance to particle crossings leading to a large decrease in surface slip that is not well represented by the model. However, for mesopores the transport coefficient increases monotonically with density, over the range studied, and is very well predicted by the theory, though at very high density the contribution from surface slip is slightly overpredicted. It is also seen that the concept of activated diffusion, commonly associated with diffusion in small pores, is fundamentally invalid for smooth pores, and the apparent activation energy is not simply related to the minimum pore potential or the adsorption energy as generally assumed.     

Electronic structure and properties of isoreticular metal-organic frameworks: the case of M-IRMOF1 (M = Zn, Cd, Be, Mg, and Ca)

We investigate the possibility of tailoring the electronic properties of isoreticular metal-organic materials by replacing the metal atom in the metal-organic cluster and by doping. The electronic structure of M-IRMOF1, where IRMOF1 stands for isoreticular metal-organic framework 1 and M = Be, Mg, Ca, Zn, and Cd, was examined using density-functional theory. The results show that these materials have similar band gaps (ca. 3.5 eV) and a conduction band that is split into two bands, the lower of which has a width that varies with metal substitution. This variation prompted us to investigate whether doping with Al or Li could be used to tailor the electronic properties of the Zn-IRMOF1 and Be-IRMOF1 materials. It is shown that replacing one metal atom with Al can effectively be used to create IRMOFs with different metallic properties. On the other hand, adding Li produces structural changes that render this approach less suitable.     

On PP-rings

A ringR is called a leftPP-ring if every principal left ideal is projective, equivalently if the left annihilatorl(a) is generated by an idempotent for allaR. These rings seem first to have been discussed by Hattori [2] and examples include (von Neumann) regular rings and domains (possibly noncommutative). In this note we give a new characterization of leftPP-rings, use that to give an elementary proof of a result of Xue [4] characterizing triangularPP-rings, and then determine when the ringT _n (R) of upper triangular matrices overR is a leftPP-ring. Throughout the paper all rings have a unity and all modules are unitary.This research was supported by NSERC Grant A8075     

Nonrigid molecule effects in molecules with linear or nongeometrically equivalent equilibrium configurations

A theoretical study is made of the states of nonrigid molecules, extending earlier work to apply Longuet–Higgins' symmetry group of feasible permutation/inversions in two previously untreated cases. The first involves nonrigid molecule processes between different stereoisomers, that is between molecular equilibrium configurations of different geometrical shapes. The second takes into account nonrigid molecule processes in linear molecules. The theory is applied to the specific case of nonrigid molecule effects in the butyl ion C₄H (case i), and the form of the nonrigid molecule energy levels and spectra are determined. The theory is also applied to determine the nonrigid molecule energy levels in linear H₂F₂ (case ii).     

Glass capillary gas chromatography of amino acid enantiomers

Glass capillaries coated with Chirasil-Val, a chirally functionalised polysiloxane, are capable in principle of resolving all protein amino-acid enantiomers in a single run and within a short analysis time, thus allowing for example the quantitative amino acid determination by enantiomer labelling. The elution characteristics of the individual amino acids however are also dependent upon the chemical nature of the capillary wall surface, and a surface pretreatment is found to be necessary if all protein amino acids are to be analysed. Of the various methods of pretreatment tested, etching of borosilicate glass with gaseous HCl followed by deposition of colloidal silicic acid is considered to be the most suitable.     

Reactions of tetracarbonylcobaltate(-I) with chlorosilanes in ether solvents

The reactions of NaCo(CO)₄ with Me_nSiCl_4?n (n = 0–3) in diethylether (Et₂O) and in tetrahydrofuran (THF) have been studied. Three distinct reaction pathways were recognised which depend on the acidity of the chlorosilane and basicity of solvent. Attack at the silicon centre via the Co atom of Co(CO)₄^? leads to formation of a SiCo bond; reaction involving a CO ligand of Co(CO)₄^? gives clusters R₃SiOCCo₃(CO)₉; and chlorosilane induced attack of Co(CO)₄^? on the solvent gives products derived from THF molecules.     

Molecular ordering and 2D conductivity in ultrathin poly(3-hexylthiophene)/gold nanoparticle composite films

This paper reports the first comparison of the structure and electrical conductivity properties of spin cast (SC) and Langmuir-Schaeffer (LS) films of regioregular poly(3-hexylthiophene) (P3HT). In addition, the effect of incorporating highly monodisperse Au nanoparticles (NPs), with a core diameter of approximately 5 nm, into SC and LS P3HT films is described. A detailed picture of molecular organization in the films has been obtained using ultraviolet-visible absorption spectroscopy, atomic force microscopy, field-emission scanning electron microscopy, X-ray diffraction, and X-ray reflectivity. Film morphology was correlated with pseudo-two-dimensional conductivity measured using scanning electrochemical microscopy, with P3HT in the semiconducting regime. It was found that SC films, which were slightly thicker than those formed with the LS technique, exhibited greater organization. This resulted in an order of magnitude higher lateral conductivity for the SC films. Inclusion of Au NPs (50 wt %) into both SC and LS films resulted in the formation of uniform and relatively flat (rms roughness approximately 1 nm) composite films. Surprisingly, the addition of NPs did not disrupt the characteristic crystal structure found for the native P3HT films. The effect of Au NPs on film lateral conductivity was found to be determined by the distribution of Au NPs within the polymer, which varied significantly between SC and LS films. Whereas Au NPs aggregated into hexagonally packed clusters in SC films, NPs in LS films were predominantly uniformly distributed between the lamella bilayer. It was found that, while the inclusion of Au NPs caused the lateral conductivity to decrease in SC films, in LS films, the lateral conductivity increased by a factor of 2.     

Enantiomeric resolution of underivatized small peptides by HPLC with a chiral crown ether stationary phase

Factors influencing the stereoisomeric resolution of underivatized dipeptides and a representative tripeptide on Crownpak (CR) columns have been investigated. The elution order and relative retention suggest that a combination of chiral, steric, and hydrophobic interactions effects the extent of chiral recognition and the retention achieved during separations. Some dipeptides whose amine terminus is located three atoms from the asymmetric center (such as dipeptides of D ,L -glycine) were resolved, but the elution order was the opposite of that expected for the type of Crownpak column used (CR(+)). Peptides containing hydrophobic substituents were strongly retained, but their retention times could be significantly reduced, and detectability improved, by use of gradient elution. Analysis of a commercial sample of D ,L -leucine-D ,L -alanine revealed the stereoisomers to be present in an unexpected quantitative ratio and demonstrated the utility of these separations for quality assurance and quantitative analyses.     

Investigation of water environments in a C18 bonded silica phase using 1H magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy

High resolution 1H magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectra have been obtained on typical C18 bonded silicas used in chromatographic solid-phase extraction separations. It has been shown for the first time that water molecules distributed in distinct physico-chemical environments within the chromatographic system can be detected directly using a simple 1H MAS NMR measurement. The resonances assigned to water protons in differing physico-chemical environments have distinct chemical shifts, line widths, relaxation times (T1 and T2) and also exhibit temperature dependent coalescence behaviour. This novel MAS approach may lead to a better understanding of the environments of other analytes in mixtures during such separations.