The first excited single-proton resonance in ~(15)F by complex-scaled Green's function method

The complex-scaled Green's function(CGF)method is employed to explore the single-proton resonance in 15F.Special attention is paid to the first excited resonant state 5/2+,which has been widely studied in both theory and experiments.However,past studies generally overestimated the width of the 5/2+state.The predicted energy and width of the first excited resonant state 5/2+by the CGF method are both in good agreement with the experimental value and close to Fortune's new estimation.Furthermore,the influence of the potential parameters and quadruple deformation effects on the resonant states are investigated in detail,which is helpful to the study of the shell structure evolution.     

圆柱形蛋白石和反蛋白石结构光子晶体的制备及其光学性质

研究了在圆柱曲面基底上自组装空心和实心的圆柱形蛋白石和反蛋白石结构光子晶体的方法. 用垂直沉积法在不同曲率半径的毛细管内自组装了空心圆柱形聚苯乙烯(PS)蛋白石结构光子晶体薄膜和二氧化硅 (SiO₂) 反蛋白石结构薄膜; 用类重力沉积法制得实心圆柱形蛋白石和反蛋白石结构光子晶体, 并讨论了这一生长方式中的状态变化过程及影响因素. 用扫描电子显微镜对样品内部结构进行了表征, 用光谱仪测试了光子晶体薄膜的反射光谱, 结果表明: 基底曲率半径和微球粒径的大小是影响空心蛋白石和反蛋白石薄膜质量的主要因素; 微球大小是影响实心结构有序性的主要因素. 关键词： 反蛋白石 空心圆柱 溶胶凝胶协同自组装     

An Attempt at the Identification of the Dynamic Properties of the Isomerization Column on the Basis of the Results of Radioisotope Measurements

The present paper makes an attempt of the interpretation of the tracer measurements by means of transfer function. Obtained data of residence time of catalyst in xylene isomerization column inserted in previous paper [1] were used to the identification of dynamic properties of individual sections of the column.     

软X射线激光偏折法测量激光等离子体电子密度分布

利用脉宽约为50ps的类镍银139nm软X射线激光作为探针,探测由脉宽80ps的驱动激光打C8H8靶产生的等离子体在1ns后的电子密度分布信息,获得了清晰的莫尔条纹图像.对结果的处理,给出了峰值电子密度为11×1021cm-3,并对在靶面附近莫尔条纹的消失现象作了初步解释 关键词： 软X射线激光探针 莫尔条纹 等离子体电子密度     

线照明并行谱域光学相干层析成像系统与缺陷检测应用研究

针对玻璃缺陷在线无损检测的迫切需求,本文报道了一种基于线照明并行谱域光学相干层析成像系统的大视场检测系统.该系统采用快速面阵CMOS相机,单次拍摄即可获取完整的横截面(B-scan)图像.基于线照明面阵探测器的并行谱域光学相干层析成像系统,可以同时获取沿线照明方向各位置处的深度分辨信息,避免了横向扫描机构的应用.研制系统的轴向分辨率为17.9μm,并行方向上的横向分辨率55.7μm,扫描方向上的横向分辨率为24.8μm,轴向扫描速率为128 000 A-scan/s,横向视场为32 mm,空气中成像深度大于6 mm,成像灵敏度达到62 dB以上.利用研制的线照明并行谱域光学相干层析成像系统,开展了不同类型玻璃表面及其内部缺陷的检测应用研究.     

含气量对液体中空泡声波频谱特性的影响

通过压电陶瓷（PZT）水听器获取了液体中激光空泡脉动辐射的声波,并计算了激光空泡在第1次脉动过程中泡内的含气量,结合空泡含气量对空泡最大半径及脉动周期影响的分析,进而分析了含气量对空泡声波频谱特性的影响。分析结果表明：激光空泡第1次脉动过程中泡内的含气量随着作用激光能量的增加而增加,含气量的多少将直接影响空泡运动的剧烈程度;含气量越多,空泡脉动越缓慢,脉动周期越长,空泡脉动辐射声波的峰值频率有向低频移动的趋势。     

Doctor-bladed Cu2ZnSnS4 light absorption layer for low-cost solar cell application

The doctor-blade method is investigated for the preparation of Cu2ZnSnS4 films for low-cost solar cell application.Cu2ZnSnS4 precursor powder,the main raw material for the doctor-blade paste,is synthesized by a simple ball-milling process.The doctor-bladed Cu2ZnSnS4 films are annealed in N2 ambient under various conditions and characterized by X-ray diffraction,ultraviolent/vis spectrophotometry,scanning electron microscopy,and current-voltage(J-V) meansurement.Our experimental results indicate that(i) the X-ray diffraction peaks of the Cu2ZnSnS4 precursor powder each show a red shift of about 0.4°;(ii) the high-temperature annealing process can effectively improve the crystallinity of the doctor-bladed Cu 2 ZnSnS 4,whereas an overlong annealing introduces defects;(iii) the band gap value of the doctor-bladed Cu 2 ZnSnS 4 is around 1.41 eV;(iv) the short-circuit current density,the open-circuit voltage,the fill factor,and the efficiency of the best Cu2ZnSnS4 solar cell obtained with the superstrate structure of fluorine-doped tin oxide glass/TiO2/In2S3/Cu2ZnSnS4/Mo are 7.82 mA/cm2,240 mV,0.29,and 0.55%,respectively.     

Studies of ion energy and yield from argon clusters heated by intense femtosecond laser pulses

Using time-of-flight spectrometry, the interaction of intense femtosecond laser pulses with argon clusters has been studied by measuring the energy and yield of emitted ions. With two different supersonic nozzles, the dependence of average ion energy on cluster size in a large range of has been measured. The experimental results indicate that when the cluster size , the average ion energy Coulomb explosion is the dominant expansion mechanism. Beyond this size, the average ion energy gets saturated gradually, the clusters exhibit a mixed Coulomb-hydrodynamic expansion behavior. We also find that with the increasing gas backing pressure, there is a maximum ion yield, the ion yield decreases as the gas backing pressure is further increased.     

Influence of transparent coating thickness on thermoelastic force source and laser-generated ultrasound waves

A numerical model is established to investigate the influence of transparent coating thickness on the laser-generated thermoelastic force source and ultrasound waves in the coating-substrate system by using the finite element method (FEM). Taking into account the effects of thermal diffusion, the finite width and duration of the laser source, as well as the temperature dependence of material properties, the transient temperature distributions are obtained firstly. Applying this temperature field to structure analyses as thermal loading, the thermoelastic stress field and laser-generated ultrasound wave in the specimen are obtained. The generation and propagation of the laser thermoelastically induced stress field and ultrasonic waves in coating-substrate system are presented in detail. The influence of transparent coating thickness on the transient temperature distribution, thermoelastic force source and the laser-generated ultrasound waveforms is investigated. The numerical results indicate that the thermoelastic force source and laser-generated ultrasound waveform are strongly affected by the coating thickness due to the constraint of coating. This method can provide insight into the generation and propagation of the laser-generated stress field in coating-substrate system consisting of a transparent coating and an opaque metallic substrate. It provides theoretical basics to optimize ultrasonic signal generation in particular applications and invert the physical and geometrical parameter of the coating-substrate system more accurately in the experiment.     

The study of novel Fe3O4@γ-Fe2O3 core/shell nanomaterials with improved properties

The surface structure of the iron oxide nanoparticles obtained by the co-precipitation method has been investigated, and a thin layer of α-FeOOH absorbed on surface of the nanoparticle is confirmed by analyses of Fourier transform infrared (FTIR), X-ray photoelectron spectra (XPS) and surface photovoltage spectroscopy (SPS). After annealed at 400 °C, the α-FeOOH can be converted to γ-Fe₂O₃. The simple-annealed procedure resulted in the formation of Fe₃O₄@γ-Fe₂O₃ core/shell structure with improved stability and a higher magnetic saturation value, and also the simple method can be used to obtain core/shell structure in other similar system.