冰晶石-氧化铝熔体结构的计算机模拟研究

用Monte Carlo法对冰晶石-氧化铝系熔体结构作了计算机模拟研究。结果表明: 熔体中既有含“氧桥”和“氟桥”的“多核”离子集团, 如F3Al-O-AlF_3、F_3Al-AlF_3、F_3Al—F—AlF_3—F等; 也有“单核”离子集团如AlF_5~(2-)、AlOF_3~(2-)等。熔体中还存在较松散的xNa~+·yF~-离子集团。熔体中不存在AlO_2~-或AlO_3~(3-)集团。     

Binding of high-mannose-type oligosaccharides and synthetic oligomannose clusters to human antibody 2G12: implications for HIV-1 vaccine design

Human antibody 2G12 broadly neutralizes human immunodeficiency virus type 1 (HIV-1) isolates and shows protective activity against viral challenge in animal models. Previous mutational analysis suggested that 2G12 recognized a novel cluster of high-mannose type oligosaccharides on HIV-1 gp120. To explore the carbohydrate antigen for HIV-1 vaccine design, we have studied the binding of 2G12 to an array of HIV-1 high-mannose type oligosaccharides by competitive ELISAs and found that Man9GlcNAc is 210- and 74-fold more effective than Man5GlcNAc and Man6GlcNAc in binding to 2G12. The results establish that the larger high-mannose oligosaccharide on HIV-1 is the favorable subunit for 2G12 recognition. To mimic the putative epitope of 2G12, we have created scaffold-based multivalent Man9 clusters and found that the galactose-scaffolded bi-, tri-, and tetra-valent Man9 clusters are 7-, 22-, and 73-fold more effective in binding to 2G12 than the monomeric Man9GlcNAc2Asn. The experimental data shed light on further structural optimization of epitope mimics for developing a carbohydrate-based HIV-1 vaccine.     

Study on open tubular capillary affinity liquid chromatography

A novel mode of affinity chromatography (AC) based on an open tubular capillary column (OTAC) is demonstrated. The OTAC column is prepared by immobilizing Cibacron blue F3GA onto the inner surface of a 50-microm-i.d. capillary column. The AC experiment is performed on a capillary electrophoresis instrument by using its pressure system as the driving force. Bovine serum albumin and lysozyme (Lys) are successfully separated with stepwise gradient elution. The relative standard deviation (RSD) for the elution time of the retained Lys is 0.08%, and good repeatability of its peak area and peak height with an RSD value lower than 2.12% for 10 consecutive runs is observed. The loading capacity and detection limit for the retained Lys are approximately 36 ng and 8.6 ng, respectively. It is also found that the amount of protein adsorbed is unaffected by the flow rate of the loading buffer, and OTAC can be used for the fast determination of biopolymers. Some of the advantages of OTAC over conventional modes of open tubular capillary liquid chromatography are that the detection sensitivity and loading capacity of a sample can be greatly improved, because the relatively large inner diameter of the capillary can be adopted and the whole capillary column can be used to adsorb the solute in OTAC.     

简法合成甲地孕酮

本文报道了合成甲地孕酮的简便方法,即以17α-乙酰氧基-黄体酮(3)为原料,将其烯醇醚(4)经Mannich反应,或将△~(3,5)-3,17α-二乙酰氧基-黄体酮(2)与二乙氧基甲烷反应,生成6-次甲基-17α-乙酰氧基-黄体酮(5),然后将5用钯/碳酸钙作催化剂转位得目的物甲地孕酮(6b),总收率分别为56%和50%(均以17α-羟基-黄体酮(1)为起始物)。     

Photoisomerization and photodissociation of aniline and 4-methylpyridine

Photoisomerization and photodissociation of aniline and 4-methylpyridine at 193 nm were studied separately using multimass ion imaging techniques. Photofragment translational energy distributions and dissociation rates were measured. Our results demonstrate that more than 23% of the ground electronic state aniline and 10% of 4-methylpyridine produced from the excitation by 193 nm photons after internal conversion isomerize to seven-membered ring isomers, followed by the H atom migration in the seven-membered ring, and then rearomatize to both methylpyridine and aniline prior to dissociation. The significance of this isomerization is that the carbon, nitrogen, and hydrogen atoms belonging to the alkyl or amino groups are involved in the exchange with those atoms in the aromatic ring during the isomerization.     

纳米晶复合Nd2Fe14B/α-Fe合金制备与磁性能的研究

采用熔体快淬及晶化处理工艺制备Nd11Fe71Co8V1.5Cr1B7.5纳米晶合金。经21m·s-1快淬及640℃ 4min晶化处理后,制成的粘结磁体的磁性能最佳,为:Br=0.64T,JHc=903.5kA·m-1,(BH)max=71kJ·m-3。添加Cr元素可提高内禀矫顽力,从而提高最大磁能积。     

Transparent conducting oxides: texture and microstructure effects on charge carrier mobility in MOCVD-derived CdO thin films grown with a thermally stable, low-melting precursor

A series of low-melting, thermally stable cadmium metal-organic chemical vapor deposition (MOCVD) precursors have been synthesized, structurally and spectroscopically characterized, and implemented in growth of highly conductive and transparent CdO thin films. One member of the series, bis(1,1,1,5,5,5-hexafluoro-2,4-pentanedionato)(N,N-diethyl-N',N'-dimethyl-ethylenediamine)cadmium(II), Cd(hfa)(2)()(N,N-DE-N',N'-DMEDA), represents a particularly significant improvement over previously available Cd precursors, owing to the low melting point and robust thermal stability. High-quality CdO films were grown by MOCVD on glass and single-crystal MgO(100) between 300 and 412 degrees C. Film growth parameters and substrate surface have large effects on microstructure and electron carrier transport properties. Enhanced mobilities observed for highly biaxially textured films grown on MgO(100) vs glass are attributed, on the basis of DC charge transport and microstructure analysis, to a reduction in neutral impurity scattering and/or to a more densely packed grain microstructure. Although single-grained films grown on MgO(100) exhibit greater mobilities than analogues with discrete approximately 100 nm grains and similar texture, this effect is attributed, on the basis of charge transport and Hall effect measurements as well as optical reflectivity analysis, to differences in carrier concentration rather than to reduced grain boundary scattering. Unprecedented conductivities and mobilities as high as 11,000 S/cm and 307 cm(2)/V.s, respectively, are obtained for epitaxial single-grained films (X-ray diffraction parameters: fwhm(omega) = 0.30 degrees, fwhm(phi) = 0.27 degrees ) grown in situ on MgO(100) at a relatively low temperature (400 degrees C).     

2, 2＇─(1, 4─亚乙二氧基)—二苯甲酸与钴(Ⅱ)生成的两种配合物的结构研究

硝酸钴与２，２＇－（１，４－亚乙二氧基）－二苯甲酸（Ｈ２Ｌ，图１）作用分别得到红色配合物ＣｏＬ＇和蓝色配合物ＣｏＬ″。经元素分析、红外光谱、紫外可见光谱、热分析等方法进行了表征、ＣｏＬ＇配合物的分子式为［ＣｏＬ．Ｈ２Ｏ］．３Ｈ２Ｏ，近八面体构型，羧酸根以双齿形式与Ｃｏ（Ⅱ）螯合；ＣｏＬ″配合物分子式为［ＣｏＬ″］。Ｈ２Ｏ，近四面体构型，羧酸根以单齿形与Ｃｏ（Ⅱ）配位。     

Resonance Rayleigh scattering determination of trace amounts of Al in natural waters and biological samples based on the formation of an Al(III)-morin-surfactant complex

A novel method for the determination of trace amounts of Al(III) based on resonance Rayleigh scattering (RRS) has been developed. In the presence of some surfactants, Al(III) can react with morin and form an Al(III)-morin-surfactant complex, which results in the enhancement of RRS intensity and the appearance of the corresponding RRS spectral characteristics. Their maximum scatter peaks are at 476 nm for the cetyltrimethylammonium bromide (CTAB) system, 489 nm for the cetylpyridinium chloride (CPC) system, 474 nm for the Triton X-100 system, and 473 nm for the Tween-20 system. The enhanced RRS intensity is directly proportional to the concentration of Al(III). The detection limits are in the range of (0.50-1.2)×10⁻⁷ mol l⁻¹ depending on the surfactant. The characteristics of RRS spectra of the complexes, the optimum conditions of these reactions and the influencing factors have been investigated. The method has high selectivity, and was successfully applied to the determination of Al(III) in natural and biological samples. Furthermore, according to different complexation capacity of Al(III)-morin-CTAB system under two pH conditions, speciation analysis of Al(III) in natural waters was explored. The labile monomeric Al fraction (mainly inorganic Al, Al_i) is determined at acidic pH and the total monomeric Al fraction (Al_a) is determined at alkaline pH. The results are in agreement with those obtained by Driscoll’s 8-hydroxyquinoline extraction-ion exchange method.