A comparative study on the morphology of P3HT:PCBM solar cells with the addition of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles by spin and rod coating methods

Our previous study presented up to 20% power conversion efficiency (PCE) enhancement of poly(3-hexylthiophene):phenyl-C₆₁-butyric acid methyl ester (P3HT:PCBM) solar cells under the Fe₃O₄ nanoparticles (NPs) self-assembly (SA) effect by spin coating. Fe₃O₄ NPs (about 11 nm hydrodynamic diameter) form a thin layer at the top interface of the light absorbing active layer, which results in the generation of PCBM rich region improving the charge transport (Zhang et al. Sol Energ Mat Sol C 160:126–133, 2017). In order to investigate the feasibility of this Fe₃O₄ NPs SA effect under large-scale production condition, a smooth rod was implemented to mimic roll-to-roll coating technique and yield active layers having about the same thickness as the spin-coated ones. Small angle neutron scattering and grazing incidence X-ray diffraction were employed finding out similar morphologies of the active layers by these two coating techniques. However, rod-coated solar cell’s PCE decreases with the addition of Fe₃O₄ NPs compared with the one without them. This is because PCBM rich region is not created at the top interface of the active layer due to the absence of Fe₃O₄ NPs, which is attributed to the weak convective flow and low diffusion rate. Moreover, in the rod-coated solar cells, the presence of Fe₃O₄ NPs causes decrease in P3HT crystallinity, thus the charge transport and the device performance. Our study confirms the role of spin coating in the Fe₃O₄ NPs SA effect and enables researchers to explore this finding in other polymer nanocomposite systems.     

Measurements of the Decay KL-->e+ e- mu+ mu-

The KTeV experiment at Fermilab has isolated a total of 132 events from the rare decay K(L)-->e+ e- mu+ mu-, with an estimated background of 0.8 events. The branching ratio of this mode is determined to be [2.69+/-0.24(stat)+/-0.12(syst)]x10(-9), with a radiative cutoff of M(2)(ee mu mu)/M(2)(K)>0.95. The first measurement using this mode of the parameter alpha from the D'Ambrosio-Isidori-Portolès (DIP) model of the K(L)gamma*gamma* vertex yields a result of -1.59+/-0.37, consistent with values obtained from other decay modes. Because of the limited statistics, no sensitivity is found to the DIP parameter beta. We use this decay mode to set limits on CP and lepton violation.     

Small-core As-Se fiber for Raman amplification

We have demonstrated Raman small-core As-Se fiber. More than 20-dB of gain was observed in a 1.1-m length of fiber pumped by a nanosecond pulse of approximately 10.8-W peak power at 1.50 microm. The peak of the Raman gain occurred at a shift of approximately 240 cm(-1). The Raman gain coefficient is estimated to be approximately 2.3 x 10(-11) m/W, which is more than 300 times greater than that of silica. The large Raman gain coefficient coupled with the large IR transparency window of these fibers shows promise for development of As-Se Raman fiber lasers and amplifiers in the near-, mid-, and long-IR spectral regions.     

Microwave-assisted acylation of 7-amino-5-aryl-6-cyanopyrido[2,3-d]pyrimidines

A microwave-assisted method is described for monoacylating 7-amino-5-aryl-6-cyanopyrido[2,3-d]pyrimidines using excess acid chlorides in pyridine. A diacylated intermediate is effectively deacylated to the product amide by a macroporous-Tris resin. A small library of 17 amides was prepared to validate the method. The integration of commercial microwave technology into the ArQule chemistry platform is also discussed.     

Photochemical effects of KrF excimer excitation in laser-induced fluorescence measurements of OH in combustion environments

This paper presents experimental evidence that using the KrF excimer laser for quantitative laser-induced fluorescence (LIF) studies of the OH A-X (3,0) system is highly problematic if the effects of both photobleaching and photochemistry are not included for laser spectral irradiances greater than 20 MW/cm² cm^-1. Pump-probe and time-resolved measurements of the OH LIF signal in an atmospheric pressure, premixed CH₄-air flame at low- and high-laser-spectral-irradiance conditions show that a significant amount of OH is produced from photofragments resulting from the simultaneous 2-photon predissociation of H₂O molecules in the C-X system. A 5+2-level rate-equation model that includes the effects of both photobleaching and photochemical OH production is shown to satisfactorily predict the data using a single adjustable parameter given by the effective, spectrally integrated 2-photon cross-section of H₂O near 248 nm. The time-integrated OH LIF signal was found to depend on both the laser spectral irradiance and the local concentration of H₂O. Additionally, use of the KrF excimer laser for 2-line rotational thermometry can produce temperature errors as great as +550 K at high laser-pulse energies. Received: 21 August 2000 / Revised version: 30 October 2000 / Published online: 21 February 2001     

Experimental evidence for a light and broad scalar resonance in D(+) --> pi(-)pi(+)pi(+) decay

From a sample of 1172 +/- 61 D(+)-->pi(-)pi(+)pi(+) decays, we find gamma(D(+)-->pi(-)pi(+)pi(+))/gamma(D(+)-->K-pi(+)pi(+)) = 0.0311 +/- 0.0018(+0.0016)(-0.0026). Using a coherent amplitude analysis to fit the Dalitz plot of these decays, we find strong evidence that a scalar resonance of mass 478(+24)(-23) +/- 17 MeV/c(2) and width 324(+42)(-40) +/- 21 MeV/c(2) accounts for approximately half of all decays.     

Der Einsatz von Sorbentien räumlich-globulrer Struktur zur Abtrennung radioaktiver Verunreinigungen aus Wasser

Abstract

Possibilities of using a new generation of sorbents have been investigated. Polymers of spatial-globular (spherulitic) structure (RGS polymers) have been tested to separate Cs, Sr and rare earth elements – which can also be radioactive contaminants – from different waters.

RGS polymers are both, solids and highly-disperse systems being extremely permeable to fluids and gases with low pressure decline. They were currently used to clean industrial waste-water.

It is shown that these polymers can be used successfully to separate radionuclides. Polymers RGS-81 and RGS-112 have high distribution coefficients for CS, Sr, Sc, the lanthanide series and Hf in weakly acid solutions. In HF solutions, Sc and Hf can be separated from Cs, Sr and the lanthanides.     

Development and Infrared Applications of Chalcogenide Glass Optical Fibers

Chalcogenide glass fibers based on sulphide, selenide, telluride, and their rare earth doped compositions are being actively pursued both at the Naval Research Laboratory in Washington, D.C. (NRL) and worldwide. Great strides have been made in reducing optical losses using improved chem ical purification techniques, but further improvements are needed in both purification and fiberization technology to attain the theoretical optical losses. Despite this, current singlemode and multimode chalcogenide glass fibers are enabling numerous applications. Some of these applications include laser power delivery, chemical sensing, imaging, scanning near field microscopy spectroscopy, fiber infrared (IR) sources lasers, amplifiers, and optical switches. The authors assert that the research and development of chalcogenide glasses will grow in the foreseeable future, especially with respect to improvements the optical quality of the fibers and the performance of the fibers in existing future applications.     

Event excess in the MiniBooNE search for ¯νμ→¯νe oscillations

The MiniBooNE experiment at Fermilab reports results from a search for ˉν_{μ}→ˉν_{e} oscillations, using a data sample corresponding to 5.66×102? protons on target. An excess of 20.9±14.0 events is observed in the energy range 475相似文献   

Temperature‐dependent Raman scattering study of multiferroic MnWO4

We have measured polarized Raman spectra of MnWO₄ single crystals at low temperatures, and studied the temperature dependence of the various phonon modes. From our Raman studies of the MnWO₄, a new transition temperature, ∼180 K, was found. We have completely assigned the symmetries of the 18 observed Raman modes of the MnWO₄, as expected from a group theoretical analysis. These Raman modes have been classified into three groups according to weak, intermediate and strong temperature dependence of the modes in each group. Six internal modes have been identified by their weak temperature dependence of the Raman wavenumbers. The temperature dependence of the wavenumbers of the B_g modes in Mg O bonds, modes of intermediate temperature dependence group, shows an anomalous behavior under 50 K. The phonon modes of strong temperature dependence show an anomalous change at ∼180 K in the linewidths. This is believed to be a new transition temperature which involves the changes in the inter‐WO₆ octahedra structure. Copyright © 2009 John Wiley & Sons, Ltd.