Transmission electron microscopy studies on structure and defects in crystalline yttria and lanthanum oxide thin films grown on single crystal sapphire by molecular beam synthesis

The Molecular beam synthesis and characterization are reported for Y₂O₃ thin films grown on Al₂O₃ (0001) substrate. The Y₂O₃ layer was highly oriented in the [111] direction with predominant orientation relations (111) Y₂O₃ ‖ (0001) Al₂O₃ and [110] Y₂O₃ ‖ [2110] Al₂O₃, corresponding to a lattice mismatch of ～20% at the interface. No significant interfacial layers were found at the Y₂O₃/Al₂O₃ interface and the large lattice misfit was accommodated by formation of stacking faults, dislocations and secondary orientation in the Y₂O₃ layer. A La₂O₃ interlayer improved the quality of the Y₂O₃ films. Full width at half maximum (FWHM) of the Y₂O₃ (222) peak decreased from 3.12° to 1.43° and the defect density in the Y₂O₃ layer was significantly reduced. These results may be relevant in the broader context of designing oxide heterolayers with controlled microstructures.     

Optimisation and characterisation of marihuana extracts obtained by supercritical fluid extraction and focused ultrasound extraction and retention time locking GC‐MS

The optimisation of focused ultrasound extraction and supercritical fluid extraction of volatile oils and cannabinoids from marihuana has been accomplished by experimental design approach. On the one hand, the focused ultrasound extraction method of volatile compounds and cannabinoids was studied based on the optimisation of cyclohexane and isopropanol solvent mixtures, and the instrumental variables. The optimal working conditions were finally fixed at isopropanol/cyclohexane 1:1 mixture, cycles (3 s^?1), amplitude (80%) and sonication time (5 min). On the other hand, the supercritical fluid extraction method was optimised in order to obtain a deterpenation of the plant and a subsequent cannabinoid extraction. For this purpose, pressure, temperature, flow and co‐solvent percentage were optimised and the optimal working conditions were set at 100 bar, 35°C, 1 mL/min, no co‐solvent for the terpenes and 20% of ethanol for the cannabinoids. Based on the retention time locking GC‐MS analysis of the supercritical fluid extracts the classification of the samples according to the type of plant, the growing area and season was attained. Finally, three monoterpenes and three cannabinoids were quantified in the ranges of 0.006–6.2 μg/g and 0.96–324 mg/g, respectively.     

A Hypergraph Framework for Optimal Model-Based Decomposition of Design Problems

Decomposition of large engineering system models is desirable sinceincreased model size reduces reliability and speed of numericalsolution algorithms. The article presents a methodology for optimalmodel-based decomposition (OMBD) of design problems, whether or notinitially cast as optimization problems. The overall model isrepresented by a hypergraph and is optimally partitioned into weaklyconnected subgraphs that satisfy decomposition constraints. Spectralgraph-partitioning methods together with iterative improvementtechniques are proposed for hypergraph partitioning. A known spectralK-partitioning formulation, which accounts for partition sizes andedge weights, is extended to graphs with also vertex weights. TheOMBD formulation is robust enough to account for computationaldemands and resources and strength of interdependencies between thecomputational modules contained in the model.     

Sequential injection analysis of lead using time-based colorimetric detection and preconcentration on an anionic-exchange resin.

The development of a sequential injection analysis manifold for the colorimetric determination of lead in water samples is described The concentration of lead was assessed from its catalytic effect on the reaction of resazurine reduction caused by sulfide in an alkali medium. To that effect, the reaction zone was stopped at the detector, and the time interval required for the attainment of an absorbance decrease of 0.800 at the wavelength of 610 nm was estimated. Interference of other transition metals of the samples was minimized by adding potassium iodide to the sample and retaining the iodocomplexes formed in an on-line anionic resin (AGI X8). Elution was made with a 2 mol/L sodium hydroxide solution. The relationship [SIA] microg/L = 0.99 (+/- 0.11) x [ETAAS] microg/L + 0 (+/- 4) was obtained upon comparing the results given by the proposed system and by electrothermal atomization atomic absorption spectrometry (ETAAS) after the analysis of ten water samples.