Preparation and characterization of composites from starch with sugarcane bagasse nanofibres

This paper reports on the results of using unbleached sugar cane bagasse nanofibres (average diameter 26.5 nm; aspect ratio 247 assuming a dry fibre density of 1,500 kg/m³) to improve the physico-chemical properties of starch-based films. The addition of bagasse nanofibres (2.5 to 20 wt%) to modified potato starch (i.e. soluble starch) reduced the moisture uptake by up to 17 % at 58 % relative humidity. The film’s tensile strength and Young’s modulus increased by up to 100 % (3.1 to 6.2 MPa) and 300 % (66.3 to 198.3 MPa) respectively with 10 and 20 wt% fibre addition. However, the strain at yield dropped by 50 % for the film containing 10 wt% fibre. Models for composite materials were used to account for the strong interactions between the nanofibres and the starch matrix. The storage and loss moduli as well as the glass transition temperature (T_g) obtained from dynamic mechanical thermal analysis, were increased with the starch-nanofibre films indicating decreased starch chain mobility due to the interacting effect of the nanofibres. Evidence of the existence of strong interactions between the starch matrix and the nanofibres was revealed from detailed Fourier transform infra-red and scanning electron microscopic evaluation.     

Sulfur‐Functionalized Graphene Oxide by Epoxide Ring‐Opening

The treatment of graphene oxide (GO) with potassium thioacetate followed by an aqueous work‐up yields a new material via the ring‐opening of the epoxide groups. The new material is a thiol‐functionalized GO (GO‐SH) which is able to undergo further functionalization. Reaction with butyl bromide gives another new material, GO‐SBu, which shows significantly enhanced thermal stability compared to both GO and GO‐SH. The thiol‐functionalized GO material showed a high affinity for gold, as demonstrated by the selective deposition of a high density of gold nanoparticles.     

Metastable Ionic Diodes Derived from an Amine‐Based Polymer of Intrinsic Microporosity

A highly rigid amine‐based polymer of intrinsic microporosity (PIM), prepared by a polymerization reaction involving the formation of Tröger’s base, is demonstrated to act as an ionic diode with electrolyte‐dependent bistable switchable states.     

N−H Bond Formation at a Diiron Bridging Nitride

Despite their connection to ammonia synthesis, little is known about the ability of iron-bound, bridging nitrides to form N−H bonds. Herein we report a linear diiron bridging nitride complex supported by a redox-active macrocycle. The unique ability of the ligand scaffold to adapt to the geometric preference of the bridging species was found to facilitate the formation of N−H bonds via proton-coupled electron transfer to generate a μ-amide product. The structurally analogous μ-silyl- and μ-borylamide complexes were shown to form from the net insertion of the nitride into the E−H bonds (E=B, Si). Protonation of the parent bridging amide produced ammonia in high yield, and treatment of the nitride with PhSH was found to liberate NH₃ in high yield through a reaction that engages the redox-activity of the ligand during PCET.     

Simple Derivatization–Gas Chromatography–Mass Spectrometry for Fatty Acids Profiling in Soil Dissolved Organic Matter

Dissolved organic matter is an important component of the global carbon cycle that allows the distribution of carbon and nutrients. Therefore, analysis of soil dissolved organic matter helps us to better understand climate change impacts as it is the most dynamic and reactive fraction in terrestrial ecosystems. Its characterization at the molecular level is still challenging due to complex mixtures of hundreds of compounds at low concentration levels in percolating water. This work presents simple methods, such as thermochemolysis– or derivatization–gas chromatography, as an alternative for the analysis of fatty acids in dissolved organic matter without any purification step. The variables of the protocols were examined to optimize the processing conditions for the C₉–C₁₈ range. As a proof of concept, fatty acid distributions of soil percolating water samples from a long-term field experiment were successfully assessed. The variability of dissolved organic acid distributions was pronounced through depth profile and soil treatment but no major change in composition was observed. However, although the optimization was done from C₉ to C₁₈, detection within the C₆-C₃₂ fatty acids range was performed for all samples.     

Cyclic antiautomorphisms of directed triple systems

A transitive triple, (a,b,c), is defined to be the set {(a,b), (b,c), (a,c)} of ordered pairs. A directed triple system of order v, DTS(v), is a pair (D,β), where D is a set of v points and β is a collection of transitive triples of pairwise distinct points of D such that any ordered pair of distinct points of D is contained in precisely one transitive triple of β. An antiautomorphism of a Directed triple system, (D,β), is a permutation of D that maps β to β⁻¹, where β ⁻¹ = {(c,b,a)|(a,b,c) E β}. In this article we give necessary and sufficient conditions for the existence of a Directed triple system of order v admitting an antiautomorphism consisting of a single cycle of length d and having v − d fixed points. Further, we give a more general result for partial Directed triple systems in which the missing ordered pairs are precisely those containing two fixed points. © 1996 John Wiley & Sons, Inc.     

Alkylation of catechol with methanol to guaiacol over sulphate-modified zirconia solid acid catalysts

A series of sulphate-promoted ZrO₂ solid acid catalysts with different contents of SO₄ ²⁻ were calcined at 450°C in air for 4 h and tested for the liquid-phase alkylation of catechol to guaiacol in a fixed-bed down-flow reactor. The 5 wt.% SO₄ ²⁻ on ZrO₂ showed the best conversion (82%) and selectivity for guaiacol (84%) at 200°C and 1 bar pressure. A smooth correlation was observed between the catalytical activity and surface acidity of sulphated zirconia. Based on our results, a surface mechanism is proposed.     

Thiaminase I (42 kDa) heterogeneity,sequence refinement,and active site location from high-resolution tandem mass spectrometry

Thiaminase I (E.C. 2.5. 1.2) from Bacillus thiaminolyticus catalyzes the degradation of thiamin (vitamin B₁). Unexpected mass heterogeneity (MW 42,127, 42,197, and 42,254; 1:2:1) in recombinant thiaminase I from Escherichia coli was detected by electrospray ionization Fourier-transform mass spectrometry, resolving power 7×10⁴. Nozzle-skimmer fragmentation data reveal an extra Ala (+71.02; 71.04=theory) and GlyAla (+128.04; 128.06=theory) on the N-terminus, in addition to the fully processed enzyme. However, the fragment ion masses were consistent only with this sequence through 330 N-terminal residues; resequencing of the last 150 bps of the thiaminase I gene yields a sequence consistent with the molecular weight values and all 61 fragment ion masses. Covalently labeling the active site with a 108-Da pyrimidine moiety via mechanism-based inhibition produces a corresponding molecular weight increase in all three thiaminase I components, which indicates that they are all enzymatically active. Inspection of the fragment ions that do and do not increase by 108 Da indicates that the active site nucleophile is located between Pro⁷⁹ and Thr¹⁷⁷ in the 379 amino acid enzyme.