Highly Efficient Orange and Warm White Phosphorescent OLEDs Based on a Host Material with a Carbazole–Fluorenyl Hybrid

A new carbazole–fluorenyl hybrid compound, 3,3′(2,7‐di(naphthaline‐2‐yl)‐9H‐fluorene‐9,9‐diyl)bis(9‐phenyl‐9H‐carbazole) (NFBC) was synthesized and characterized. The compound exhibits blue‐violet emission both in solution and in film, with peaks centered at 404 and 420 nm. In addition to the application as a blue emitter, NFBC is demonstrated to be a good host for phosphorescent dopants. By doping Ir(2‐phq)₃ in NFBC, a highly efficient orange organic light‐emitting diode (OLED) with a maximum efficiency of 32 cd A^?1 (26.5 Lm W^?1) was obtained. Unlike most phosphorescent OLEDs, the device prepared in our study shows little efficiency roll‐off at high brightness and maintains current efficiencies of 31.9 and 26.8 cd A^?1 at a luminance of 1000 and 10 000 cd m^?2, respectively. By using NFBC simultaneously as a blue fluorescence emitter and as a host for a phosphorescent dopant, a warm white OLED with a maximum efficiency of 22.9 Lm W^?1 (21.9 cd A^?1) was also obtained.     

Assessment of Joule heating and its effects on electroosmotic flow and electrophoretic transport of solutes in microfluidic channels

Joule heating is inevitable when an electric field is applied across a conducting medium. It would impose limitations on the performance of electrokinetic microfluidic devices. This article presents a 3-D mathematical model for Joule heating and its effects on the EOF and electrophoretic transport of solutes in microfluidic channels. The governing equations were numerically solved using the finite-volume method. Experiments were carried out to investigate the Joule heating associated phenomena and to verify the numerical models. A rhodamine B-based thermometry technique was employed to measure the solution temperature distributions in microfluidic channels. The microparticle image velocimetry technique was used to measure the velocity profiles of EOF under the influence of Joule heating. The numerical solutions were compared with experimental results, and reasonable agreement was found. It is found that with the presence of Joule heating, the EOF velocity deviates from its normal "plug-like" profile. The numerical simulations show that Joule heating not only accelerates the sample transport but also distorts the shape of the sample band.     

Two transition metal coordination polymers of the 7,7,8,8‐tetracyanoquinodimethane dianion (TCNQ2−)

Each of the two novel title transition metal coordination polymers, namely catena‐poly[[bis{[tris(2‐pyridylmethyl)amine]cobalt(II)}‐μ₄‐7,7,8,8‐tetracyanoquinodimethanide(2−)] bis[7,7,8,8‐tetracyanoquinodimethanide(1−)] methanol disolvate], {[Co₂(C₁₂H₄N₄)(C₁₈H₁₈N₄)₂](C₁₂H₄N₄)₂·2CH₃OH}_n, (I), and catena‐poly[[[[tris(2‐pyridylmethyl)amine]iron(II)]‐μ₂‐7,7,8,8‐tetracyanoquinodimethanide(2−)] methanol solvate], {[Fe(C₁₂H₄N₄)(C₁₈H₁₈N₄)]·CH₃OH}_n, (II), contains η⁴‐TPA and cis‐bridging TCNQ²⁻ ligands [TPA is tris(2‐pyridylmethyl)amine and TCNQ is 7,7,8,8‐tetracyanoquinodimethane], but the two compounds adopt entirely different structural motifs. Compound (I) consists of a ribbon coordination polymer featuring μ₄‐TCNQ²⁻ radical anion ligands bridging four different octahedral Co^II centers. Each formula unit of the polymer is flanked by two uncoordinated TCNQ⁻ anions and two methanol solvent molecules. All three TCNQ anions have crystallographic inversion symmetry. In (II), the 2₁ symmetry operator generates a one‐dimensional zigzag chain of octahedral Fe^II centers with μ₂‐TCNQ²⁻ bridges. A methanol solvent molecule forms hydrogen bonds to one of the terminal N atoms of the bridging TCNQ²⁻ dianion. To the best of our knowledge, these are the first examples of one‐dimensional coordination polymers forming from cis coordination of two TCNQ ligands to octahedral metal centers.     

MS-based metabolomics revealing Bornean Sinularia sp. extract dysregulated lipids triggering programmed cell death in Hepatocellular carcinoma

Abstract

Soft coral, Sinularia sp. had been proven to inherit promising anti-cancer properties against variety of cancer. Current study, Sinularia sp. extract was introduced to Hepatocellular carcinoma (Hep 3B). Cell viability assay indicated the extract exhibit a dose and time dependent cytotoxicity. LC₅₀ exhibited the lowest at 72?h post treatment estimated as 45.3 µg/mL. Morphological alterations including nuclear condensation, cytoplasm shrinkage and deformed cellular shape in treated Hep 3B were observable. Chemometric analysis revealed hydrophobic metabolites were significantly altered. Elevated vitamin D and derivatives tend to up-regulation Ca²⁺ and ROS subsequently triggering apoptosis. Dysregulated glycerolipids may suggest that they were biotransformed to compensate the needs of phospholipids during cell damage. Perturbation of sphingolipids, ceramide and carbohydrate-conjugated ceramides species increased the release of pro-apoptotic components reside within mitochondria and promote programmed cell death in treated Hep 3B. To conclude, MS-based metabolomics enabled the characterization of Sinularia sp. extract-induced cell death.     

Reusable optical bioassay platform with permeability-controlled hydrogel pads for selective saccharide detection

A reusable optical bioassay platform using permeability-controlled hydrogel pads for selective saccharide detection has been developed. An optical glucose detection assay based on fluorescence resonance energy transfer (FRET) between dye-labeled dextran and Concanavalin A (ConA) was incorporated into hydrogel pads by entrapment. The hydrogel pads are constructed from hemispherical hydrogel attached onto hydrophobic surfaces of a microtiter plate. The resulted hemispherical hydrogel pads entrapping the sensing biological materials were further surface coated with polyelectrolyte multilayers through a Layer-by-Layer (LbL) self-assembly process to create a permeability-controlled membrane with nanometer thickness. The selective permeable LbL film deposited on the hydrogel surface allows small molecular weight analytes to diffuse into the hydrogel pads while the large molecular weight sensing biological molecules are immobilized. An encapsulation efficiency of 75% for the ConA/Dextran complex within the coated hydrogel pads was achieved and no significant leakage of the complex was observed. Glucose calibration curve with linear range from 0 to 10 mM glucose was obtained. Selective permeability of the hydrogel pads has been demonstrated by measurement of saccharides with various molecular weights. The LbL hydrogel pads could selectively detect monosaccharides (glucose, MW = 180) and disaccharides (sucrose, MW = 342) while polysaccharides (dextran, MW ∼ 70 kDa) cannot diffuse through the LbL layer and are excluded. LbL hydrogel pads allow regeneration of the FRET system with good signal reproducibility of more than 90% to construct a reusable and reagentless optical bioassay platform.     

Determination of gaseous and particulate carbonyls in air by gradient-elution micellar electrokinetic capillary chromatography

A new continuous-flow gradient-elution micellar electrokinetic capillary chromatography method is developed for the determination of airborne carbonyls after derivatization with 2,4-dinitrophenylhydrazine. A total of 16 carbonyls can be determined with detection limits ranging from 0.94 to 8.50 mg/L, working range from 4.72 to 346 mg/L, and repeatabilities (relative standard deviation, n=5) from 1.23 to 4.6% or 3.93 to 7.6% for migration time and peak area, respectively. Coupling with denuder-filter sampling, a preliminary survey has been conducted to determine gaseous and particulate carbonyls from air sampled at a roadside station. The method is shown to have sufficient sensitivity for 1-h sampling of ambient carbonyls with detection limits ranging from 0.045 to 1.2 microg/m3 and working range from 0.11 to 43.3 microg/m3 at a flow rate of 10 Lpm. The method requires minimal modification of commercially available capillary electrophoresis equipment and can differentiate gaseous and particulate carbonyls to provide essential information and objective data for adopting effective measures to combat the discharge of carbonyl compounds to the atmosphere.     

The Role of Solvent Ligated Metal Complexes Associated with Weakly Coordinating Counteranions (WCAs) in Isobutylene Polymerization

Summary: Polyisobutylene is an industrially important polymer which is conventionally prepared by polymerization at temperatures below 0 °C. The application of solvent ligated metal complexes associated with weakly coordinating counteranions (WCAs), however, allows the room temperature (30 °C) polymerization of isobutylene resulting in highly reactive polyisobutylene (HR-PIB) containing a high content of terminal double bonds. Recently described complexes include manganese (II), copper(II), molybdenum(III) and zink(II) complexes which were coordinated octahedrally with the boron and alumina based WCAs, each with its own advantages and traits.     

SKH-1 hairless mice repair UV-induced pyrimidine dimers in epidermal DNA

The SKH-1 hairless mouse strain has been used extensively as a model for human photocarcinogenesis, photoimmunology and photoaging, but little is known about DNA repair in living mouse skin. Mice were irradiated with UV-B light at doses which produce mild to severe sunburn, and the frequency of pyrimidine dimers in epidermal DNA was measured immediately and 6 h after irradiation using T4 endonuclease V treatment and alkaline agarose gel electrophoresis. The results demonstrate significant removal of pyrimidine dimers in mouse skin in vivo, with a dimer half-life of 7.4 h. These findings are similar to the repair of dimers in human skin in vivo. The SKH-1 hairless mouse is thus a useful model for pyrimidine dimer repair in human skin.     

Magnetically recoverable chiral catalysts immobilized on magnetite nanoparticles for asymmetric hydrogenation of aromatic ketones

Novel heterogenized asymmetric catalysts were synthesized by immobilizing preformed Ru catalysts on magnetite nanoparticles via the phosphonate functionality and were characterized by a variety of techniques, including TEM, magnetization, and XRD. These nanoparticle-supported chiral catalysts were used for enantioselective heterogeneous asymmetric hydrogenation of aromatic ketones with very high enantiomeric excess values of up to 98.0%. The immobilized catalysts were easily recycled by magnetic decantation and reused for up to 14 times without loss of activity and enantioselectivity. Orthogonal nature of the present catalyst immobilization approach should allow the design of other superparamagnetic nanoparticle-supported asymmetric catalysts for a wide range of organic transformations.     

Hydration of CO adsorbed on Pt(100) at cryogenic temperatures in UHV environments

Adsorption of small amounts of D(2)O (ca. 0.01 L exposure) on CO(sat)/Pt(100) surfaces in ultrahigh vacuum at 105 K was found to split the asymmetric peak at 2100 cm(-1) in the infrared reflection absorption spectra attributed to the stretching of CO adsorbed on atop sites into two clearly defined features: an intense component, which shifted toward lower energies due to surface hydration of adsorbed CO (originally at 2100 cm(-1), peak a), and a smaller peak centered at 2094 cm(-1) (peak b), which remained fixed in position even after closing the D(2)O dosing valve. The energies of peaks a and b, as determined by statistical analyses, correlated very well with those reported in the literature for CO adsorbed at high coverages on Pt(100) originally in the (5 x 20) or (hex) reconstruction, and on the unreconstructed Pt(100)-(1 x 1), respectively, at 90 K. On these bases, the asymmetry of the peak observed for CO(sat)/Pt(100) (no D(2)O dosing) is ascribed to the presence of CO linearly adsorbed on these two different sites on the surface, for which the rate of hydration is larger for the (5 x 20) compared to the (1 x 1) phases.