Optical image asymmetric cryptosystem using fingerprint based on iterative fraction Fourier transform

A novel asymmetric cryptosystem for optical image is proposed using fingerprint based on iterative fractional Fourier transform. To enhance the security, a hyperchaotic phase generated by a 4D Lorenz system is considered as the public key in the proposed encryption system, while the private key is emerged by the retrieved phase and fingerprint. In the encryption process, the secret information is hid into the hyperchaotic phase. Subsequently, the private key can be obtained by a reversible operation. To decrypt the original image, the ciphertext and private key are imported into the input plane of fractional Fourier system. This system is also applicable for information authentication because the fingerprint is used both in encryption and decryption approach. Some numerical simulations have been done to test the validity and capability of the encryption system.     

A high efficient antireflective down-conversion Y<Subscript>2</Subscript>O<Subscript>3</Subscript>:Bi<Superscript>3+</Superscript>, Yb<Superscript>3+</Superscript> thin films

The high efficient antireflective down-conversion Y₂O₃:Bi, Yb films have been prepared successfully on Si(100) substrates by pulsed laser deposition (PLD) method, Upon excitation of ultraviolet photon varying from 300 to 400 nm, near-infrared emission of Yb³⁺ was observed for the film, can be efficiently absorbed by silicon (Si) solar cell. Most interestingly, there is a very low average reflectivity 1.46% for the incident light from 300 to 1100 nm. To the best of our knowledge, this is the lowest reflectance for the down-conversion thin films prepared by cost efficient method. The surface topography of the high efficient antireflective films can be controllably tuned through the substrate template regulation by optimizing process parameters. Besides, the results showed that there is a close relationship between luminescent property and morphology of the film. With the change of the surface morphology, the intensity of Bi³⁺ and Yb³⁺ emission peaks increase first and then decrease. The obtained results demonstrate that this film can enhance the Si solar cell efficiency through light trapping and spectrum shifting.     

Design of full-duplex and multifunction bidirectional CMOS transceiver for optical interconnect applications

This work presents a full-duplex and multifunction bidirectional transceiver for optical interconnect application. The transceiver utilizes a common limiting amplifier/gain stage, thus reducing total chip area and total power consumption. While providing a full-duplex bidirectional transmission with the aid of a hybrid circuit between the electrical input/output (I/O) and the optoelectronic signals from the transmitter and receiver circuits, it also allows for a half-duplex operation with the aid of a switch between the transimpedance amplifier signals and the transmitter electrical input from the I/O port. The multifunction bidirectional CMOS transceiver is designed in a 0.13 µm Si-CMOS technology, with power dissipation of 79 and 54.4 mW for the transmitter and receiver, respectively. It shows a 3-dB bandwidth of 5.58 and 5.69 GHz for the transmitter and the receiver respectively and with a 3-dB gain of 66.14 and 69.6 dB, in full-duplex mode. The transceiver operates up to 7 Gb/s in full-duplex mode.     

Study on optical and electrical properties of gold-doped silicon fabricated by femtosecond laser

Microstructured silicon (Si) materials have been fabricated by femtosecond (fs) laser ablation and have been hyperdoped with gold (Au) impurities. The ablated Si materials showed large and thermostable infrared absorption at 1.1–2.5 μm wavelengths, which was contributed by sub-band absorption and laser-induced defects absorption. The Au–Si alloy was formed after laser irradiation onto the Au-coated Si surface, which was determined by XRD characterization. Using N-type Si substrate, the fabricated Au-doped Si performed lower sheet carrier density due to the self-compensation effect between deep donor and acceptor energy lever of Au in bulk Si material. From Hall measurement, both the p- and n- types of Au-doped Si samples can be obtained by controlling the type of Si substrate.     

Terahertz artificial dielectric cuboid lens on substrate for super-resolution images

This paper presents an investigation of terajets formation by dielectric periodic structure at terahertz frequencies (0.1–0.2 THz) in effective medium regime (photonic metamaterial). The dispersions of effective permittivity for periodic structures formed by plastics (ABS, black) were analytically obtained for both regimes. The study of the interaction of a plane wave and artificial cubic dielectric on a substrate parallelepiped to form a subwavelength terahertz beams (terajet) was performed. The results of numerical simulation of S-parameters of structure are discussed. The subwavelength beam waist of terajets about 0.39λ–0.41λ were obtained. The quality factor of terajets are discussed. The results may be applied for creation of methods to obtain subwavelength beams in the terahertz frequency range, and devices based on them. These investigations are opening new research lines such as mesoscale focusing devices for different sensing applications.     

Quantum information-holding single-photon router based on spontaneous emission

In this paper, we propose a single-photon router via the use of a four-level atom system coupled with two one-dimensional coupled-resonator waveguides. A single photon can be directed from one quantum channel into another by atomic spontaneous emission. The coherent resonance and the photonic bound states lead to the perfect reflection appearing in the incident channel. The fidelity of the atom is related to the magnitude of the coupling strength and can reach unit when the coupling strength matches g _a = g _b . This shows that the transfer of a single photon into another quantum channel has no influence on the fidelity at special points.     

Fermion superfluid with hybridized <Emphasis Type="Italic">s</Emphasis>- and <Emphasis Type="Italic">p</Emphasis>-wave pairings

Ever since the pioneering work of Bardeen, Cooper and Schrieffer in the 1950s, exploring novel pairing mechanisms for fermion superfluids has become one of the central tasks in modern physics. Here, we investigate a new type of fermion superfluid with hybridized s- and p-wave pairings in an ultracold spin-1/2 Fermi gas. Its occurrence is facilitated by the co-existence of comparable s- and p-wave interactions, which is realizable in a two-component ⁴⁰K Fermi gas with close-by s- and p-wave Feshbach resonances. The hybridized superfluid state is stable over a considerable parameter region on the phase diagram, and can lead to intriguing patterns of spin densities and pairing fields in momentum space. In particular, it can induce a phase-locked p-wave pairing in the fermion species that has no p-wave interactions. The hybridized nature of this novel superfluid can also be confirmed by measuring the s- and p-wave contacts, which can be extracted from the high-momentum tail of the momentum distribution of each spin component. These results enrich our knowledge of pairing superfluidity in Fermi systems, and open the avenue for achieving novel fermion superfluids with multiple partial-wave scatterings in cold atomic gases.     

Double-temperature ratchet model and current reversal of coupled Brownian motors

On the basis of the transport features and experimental phenomena observed in studies of molecular motors, we propose a double-temperature ratchet model of coupled motors to reveal the dynamical mechanism of cooperative transport of motors with two heads, where the interactions and asynchrony between two motor heads are taken into account. We investigate the collective unidirectional transport of coupled system and find that the direction of motion can be reversed under certain conditions. Reverse motion can be achieved by modulating the coupling strength, coupling free length, and asymmetric coefficient of the periodic potential, which is understood in terms of the effective potential theory. The dependence of the directed current on various parameters is studied systematically. Directed transport of coupled Brownian motors can be manipulated and optimized by adjusting the pulsation period or the phase shift of the pulsation temperature.     

Effect of random coupling of orthogonal modes on polarization characteristics of single-mode fiber optical waveguides (SMF) and SMF-based ring interferometers. I. Change in the degree of polarization of nonmonochromatic radiation propagating through a single-mode fiber optical waveguide

We propose a method for calculating the degree of polarization of nonmonochromatic radiation as it propagates through a single-mode fiber optical waveguide (SMF), based on dividing the length of the fiber into segments equal to the depolarization length of the radiation in the SMF. We have obtained the dependences of the degree of polarization of the radiation on the length of the fiber for an SMF with strong and weak anisotropy. In the case of anisotropic SMF's characterized by weak coupling of orthogonal modes, the results match those obtained previously by other calculation methods. The results for weakly anisotropic SMF's characterized by strong coupling of orthogonal modes are obtained here for the first time.Institute of Applied Physics, Russian Academy of Sciences. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, No. 10, pp. 1311–1320, October, 1994.