Relations entre structure chimique et grandeurs de retention. VII. Composés de structure cyclopropanique

Résumé Les auteurs ont étudié le comportement chromatographique sur plusieurs phases stationnaires polaires et non polaires de composés cyclopropaniques stéréoisomêres: où R=H ou CH₃ et X=CH, COOCH₃ ou CH₂OH. Les résultats sont interprétés en fonction de la configuration de X par rapport à , de la nature électronique de X et de l'orientation du phényle par rapport au plan du cyclopropane.

---

Relationship between chemical structure and retention. VII. Cyclopropane compounds

Summary The chromatographic behaviour, on several polar and non polar phases, of stereoisomeric cyclopropanes has been studied R=H or CH₃ and X=CN, COOCH₃, CH₂OH. The results are interpreted in terms of the X versus configuration, the electronic nature of X and the orientation of the phenyl ring in relation to plane of the cyclopropane ring.

     

An electrically conductive plastic composite derived from polypyrrole and poly(vinyl chloride)

An electrically conductive plastic material was obtained by the electrochemical polymerization of pyrrole in a poly(vinyl chloride) matrix. The transmission electron microscopy shows that polypyrrole is uniformly distributed in the matrix. The conductivity of the composites fall in the range of 5 to 50 S/cm, and their mechanical properties, as measured in a stress—strain test, are very similar to those of pure poly(vinyl chloride). These can be further improved by addition of poly(chloroprene) rubber as a plasticizer.     

Influence of the cathodic polarization on the stability of Ti surface in concentrated KOH solutions

The stability of spontaneous thin layers and thin layers formed upon cathodical polarization of Ti in KOH solutions have been studied by potentiostatic and ellipsometric methods. At open circuit potential (OCP) the strongly adherent films, whose thickness depends on the concentration of the KOH solution, were formed. During the cathodic polarization the transformation of these films to weakly adsorbed precipitated layers on the electrode surface was observed. Comparing the theoretically computed curves with the experimental Ψ vs Δ loci measured ellipsometrically, the complex indices of refraction and the thickness of the generated films, from 3.6 to 60 nm in 1 M KOH and from 36 to 105 nm in 5 M KOH (adherent to the electrode surface), were determined. At OCP the rate of film growth increases with increasing the concentration of KOH solution. Cathodic polarizations change the chemical composition and retard the rate of film growth. Based on the ellipsometric and electrochemical data the chemical compositions of the formed films consisted of TiO₂, Ti₂O₃, TiO₂·H₂O, Ti(OH)₃ and TiOOH·nH₂O.     

Fuzzy Symmetries for Linear Molecules and their Molecular Orbitals

In this paper, the fuzzy symmetry of some prototypical linear molecules has been analyzed. The results show that some molecular orbitals (MOs) are less symmetrical but some others are more symmetrical than the molecular skeleton, which the MOs correspond to. The membership functions of space inversion for MOs are closely related to the chemical characteristics of the MOs. Sometimes, although the symmetry of a molecular skeleton is not obvious, however that of some MO is quite obvious. The membership functions of the fuzzy inversion symmetry depend on the choice of the position of the center of inversion. As compared to those of diatomic molecules and linear tri-atomic molecules, the linear polyatomic molecules in which a distinctive fuzzy symmetry of space translation may exist, and thus a significant effect on their properties can be expected.     

Synthesis and characterization of microencapsulated dicyclopentadiene with melamine–formaldehyde resins

Microcapsules containing healing agents have been used to develop the self-healing polymeric composites. These microcapsules must possess special properties such as appropriate strength and stability in surrounding medium. A new series of microcapsules containing dicyclopentadiene (DCPD) with melamine–formaldehyde (MF) resin as shell material were synthesized by in situ polymerization technology. These microcapsules may satisfy the requirements for self-healing polymeric composites. The chemical structure of microcapsule was identified by using Fourier transform infrared (FTIR) spectrometer. The morphology of microcapsule was observed by using optical microscope (OM) and scanning electron microscope. Size distribution and mean diameter of microcapsules were determined with OM. The thermal properties of microcapsules were investigated by using thermogravimetric analysis and differential scanning calorimetry. Additionally, the self-healing efficiency was evaluated. The results indicate that the poly(melamine–formaldehyde) (PMF) microcapsules containing DCPD have been synthesized successfully, and their mean diameters fall in the range of 65.2∼202.0 μm when the adjusting agitation rate varies from 150 to 500 rpm. Increasing the surfactant concentration can decrease the diameters of microcapsules. The prepared microcapsules are thermally stable up to 69 °C. The PMF microcapsules containing DCPD can be applied to polymeric composites to fabricate the self-healing composites.     

Synthesis,crystal structure,electrochemical properties and large optical limiting effect of a novel 3-(E)-ferrocenyl-vinyl-<Emphasis Type="BoldItalic">N</Emphasis>-hexyl carbazole

The novel compound, 3-(E)-ferrocenyl-vinyl-N-hexylcarbazole (FVHC) was first synthesized and fully characterized by elemental analysis, IR, ¹H-NMR, single-crystal X-ray diffraction, ultraviolet (UV) absorption, cyclic voltammograms (CV) and optical limiting (OL) measurements. The result of single crystal X-ray diffraction for the compound reveals that the ferrocenyl and carbazole groups are approximately coplanar, and bridged by double-bond with E configuration, showing that there is a well-delocalized π-electron system in the molecule. The electrochemical investigation indicated that the electron in the FVHC may partially be delocalized over the π-conjugated system and CT process in functionalized carbazole systems. Besides, the compound exhibited strong UV absorption and large optical limiting effect, indicating promising potential applications as useful OL materials.     

Synthesis of 6R(β)-tritylaminopenicillanic-3R(β)-alcohol,a versatile stereoisomer of natural β-lactams

In an attempt to rationalize a synthesis of penicillin analogs modified at C(3), we have isolated the 3R(β)-carbinolamide derivative 4a. The trityl substituent on N(6′) seems to be responsible for the inversion of configuration which occurs at C(3) during the acid hydrolysis of the isocyanate intermediate. An hydrogen bond is formed on the β-face of the bell-shaped bicyclic skeleton between the N(6′)-nitrogen lone pair and the C(3) hydroxyl group. On standing, the carbinolamide analog slowly isomerizes to its expanded bicyclic isomer 4b , but the starting material may be easily recovered by treatment with acid. The postulated intermediate during isomerization, i.e., the open aldehyde form, does not accumulate. Substitutions of the hydroxyl group at C(3) lead to a variety of compounds with the biologically active 3S(α) configuration. These may be used to study the importance of the carboxyl group of penicillins in their interaction with β-lactamases at the molecular level.     

Carbon nanotube array-based biosensor

Aligned multi-wall carbon nanotubes (MWNT) grown on platinum substrate are used for the development of an amperometric biosensor. The opening and functionalization by oxidation of the nanotube array allows for the efficient immobilization of the model enzyme, glucose oxidase. The carboxylated open-ends of nanotubes are used for the immobilization of the enzymes, while the platinum substrate provides the direct transduction platform for signal monitoring. It is also shown that carbon nanotubes can play a dual role, both as immobilization matrices and as mediators, allowing for the development of a third generation of biosensor systems, with good overall analytical characteristics.     

Binary mixtures based on polycaprolactone and cellulose derivatives

Pyrolytic process has a promising potential for the environmentally friendly upgrading of lignocellulosic and plastic waste. Thermogravimetry and pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS) were used to get information about the reactive decomposition of PCL in binary mixtures with microcrystalline cellulose (MC) or sisal fibres (SF). Preliminary thermogravimetric investigation showed that biomass is thermally degraded at lower temperatures than PCL and this process has a predominant influence on the thermal behaviour of the mixtures. Discrepancies between the experimental and predicted TG/DTG profiles were considered as a measurement of the extent of interactions occurring on co-pyrolysis. It was found that reactivity of PCL was slightly increased in PCL-SF binary mixtures. Evolution of acidic products from cellulose and hemicelluloses decomposition may promote PCL degradation in binary mixtures with SF. It seems that the co-pyrolysis process could have potential for the environmentally friendly transformation of biocomposites.     

Isolation of pure (2S,1'S,2'S)-2-(2'-carboxycyclopropyl)glycine from Blighia sapida (Akee)

The isolation of (2S,1'S,2'S)-2-(2'-carboxycyclopropyl)glycine (CCG I, 2) from Blighia sapida (Akee) was achieved through column chromatography on deactivated silica gel followed by ion-exchange chromatography. A HPLC method has also been devised in order to assess the purity of the isolated product.