Electrodeposition of 3D Ordered Macroporous Germanium from Ionic Liquids: A Feasible Method to Make Photonic Crystals with a High Dielectric Constant

A promising method for the production of germanium photonic crystals consists of electrodeposition of Ge from GeCl₄‐containing ionic liquids inside templates of polystyrene colloidal crystals and subsequent removal of the template. This room‐temperature method gives rise to the fabrication of a three‐dimensional highly ordered macroporous germanium nanostructure (see picture; scale: 2 μm) as a prototype of a photonic crystal.

     

Towards a nondestructive chemical characterization of biofilm matrix by Raman microscopy

In this study, the applicability of Raman microscopy (RM) for nondestructive chemical analysis of biofilm matrix, including microbial constituents and extracellular polymeric substances (EPS), has been assessed. The examination of a wide range of reference samples such as biofilm-specific polysaccharides, proteins, microorganisms, and encapsulated bacteria revealed characteristic frequency regions and specific marker bands for different biofilm constituents. Based on received data, the assignment of Raman bands in spectra of multispecies biofilms was performed. The study of different multispecies biofilms showed that RM can correlate various structural appearances within the biofilm to variations in their chemical composition and provide chemical information about a complex biofilm matrix. The results of RM analysis of biofilms are in good agreement with data obtained by confocal laser scanning microscopy (CLSM). Thus, RM is a promising tool for a label-free chemical characterization of different biofilm constituents. Moreover, the combination of RM with CLSM analysis for the study of biofilms grown under different environmental conditions can provide new insights into the complex structure/function correlations in biofilms.     

Simultaneous determination of Fe, P, Ca, Mg, Zn, and Cu in whole blood by two-jet plasma atomic emission spectrometry

Availability of many biological samples in ample quantity for biomedical investigations sometimes is very restricted. Therefore, there is the need for the simple techniques allowing the analysis of small amount samples. In the present work the two-jet plasma atomic emission spectrometry techniques for the determination of Fe, P, Ca, Mg, Zn, and Cu in whole blood are proposed. The first technique is developed for direct analysis of freeze-dried blood. The sample preparation consisted in a dilution of blood powder (particle size 20 μm or less) with a spectroscopic buffer (graphite powder containing 15 wt.% NaCl). For the analysis of liquid whole blood, previous carbonization (not ashing) of blood evaporated on graphite powder was applied. Calibration samples based on graphite powder containing 15 wt.% NaCl were used. The validation of the techniques was confirmed by the use of different sample preparation procedures (wet acid digestion and dry carbonization), the analysis of IAEA A-13 reference material (freeze-dried bovine whole blood), and the comparison of the results obtained by the proposed technique with the results of the stripping voltammetry technique. Just 20-50 μL of whole blood is quite enough for all determinations. The proposed techniques were successfully applied for the simultaneous determination of Fe, P, Ca, Mg, Zn, and Cu in whole blood of living experimental rats and mice and human blood.     

Diastereoselective lithium salt-assisted 1,3-dipolar cycloaddition of azomethine ylides to the fullerene C60

An efficient method for the diastereoselective synthesis of 5-substituted 3,4-fulleroproline esters based on the lithium salt-assisted cycloaddition of azomethine ylides has been developed. A series of the fulleroproline esters containing either electron donating or electron withdrawing substituents was prepared with high yields and diastereoselectivities provided by the S-trans-configuration of ylide generated in situ from the corresponding Schiff base in the presence of a lithium salt and base. This method provides easy preparation of 3,4-fulleroproline derivatives suitable for fullerene-based peptide synthesis.     

Collagenous Extracellular Matrix of Cartilage Submitted to Mechanical Forces Studied by Second Harmonic Generation Microscopy

Osteoarthritis is a degenerative pathology leading to degradation of the extracellular matrix (ECM). Similar effects can be visualized when applying mechanical or biochemical constraints on cartilaginous tissue. Here, we characterized modification of the ECM appearing under mechanical compression and/or biochemical action (hypoxia environment, nitric oxide and collagenase action). In recent decades, multiphoton microscopy has proved its interest for observing living, thick and opaque biological tissues. Thus, the main components of the cartilaginous ECM can be observed without fluorescent labeling. In particular, the collagen network emits strong second harmonic generation (SHG) signal which could be collected at half of the excitation wavelength. Combining autofluorescence and SHG signal detection enables to obtain complementary structural information. Here, we proved that multiphoton microscopy represents an appropriate tool for ex vitro cartilage imaging. First, we showed that SHG signal specifically comes from collagen (collagenase digestion). Further, we verified that the use of an appropriate band-pass filter enables to reject the autofluorescence from the ECM. Once this specificity was shown, we followed modification of the cartilage ECM submitted to mechanical or biochemical constraints (compression, enzymatic digestion). By performing textural analysis of SHG images (Haralick’s method), we showed the restructuration of the collagen network according to constraints.     

Synthesis and characterization of novel polythiourethane hardeners for epoxy resins

A novel thiol-terminated polythiourethanes were synthesized from low-molecular-weight di- and multifunctional mercaptans and diisocyanates and employed as curing agent of epoxy resin. The curing reaction of epoxy resin and thermal properties of cured products were investigated with differential scanning calorimetry. Evaluation of climatic ageing resistance was made by the change in mechanical properties. Mechanical studies indicated that the application of polythiourethane has toughening effect and significantly increases ageing resistance of the cured resins. The results of this study indicate that molecular structure and functionality of polythiourethane oligomers are of critical importance in governing the curing mechanism, structure of the network and final properties of epoxy compositions.     

New meroterpenoids from the marine sponge Aka coralliphaga

Three new sulfated meroterpenoids containing sesquiterpene and hydroquinone moieties, namely siphonodictyal A sulfate (1), akadisulfate A (2) and akadisulfate B (3), along with the known siphonodictyal B3 and bis(sulfato)-cyclosiphonodictyol A were isolated from the sponge Aka coralliphaga. Their structures were elucidated on the basis of spectroscopic data. Akadisulfate B and siphonodictyal B3 showed a radical-scavenging activity comparable with that of the known lipophylic antioxidant BHT.     

Binary salt of a palladium(II) complex with (phosphonomethyl)phosphonic (medronic) acid comprising `handbell‐like' [Pd{μ‐CH2(PO3)2}]3 units

The asymmetric unit of the title compound, dipotassium bis[hexaaquanickel(II)] tris(μ₂‐methylenediphosphonato)tripalladium(II) hexahydrate, K₂[Ni(H₂O)₆]₂[Pd₃{CH₂(PO₃)₂}₃]·6H₂O, consists of half a {[Pd{CH₂(PO₃)₂}]₃}⁶⁻ anion [one Pd atom (4e) and a methylene C atom (4e) occupy positions on a twofold axis] in a rare `handbell‐like' arrangement, with K⁺ and [Ni(H₂O)₆]²⁺ cations to form the neutral complex, completed by three solvent water molecules. The {[Pd{CH₂(PO₃)₂}]₃}⁶⁻ units exhibit close Pd...Pd separations of 3.0469 (4) Å and are packed via intermolecular C—H...Pd hydrogen bonds. The [KO₉] and [NiO₆] units are assembled into sheets coplanar with (011) and stacked along the [100] direction. Within these sheets there are [K₄Ni₄O₈] and [K₂Ni₂O₄] loops. Successive alternation of the sheets and [Pd{CH₂(PO₃)₂}]₃ units parallel to [001] produces the three‐dimensional packing, which is also supported by a dense network of hydrogen bonds involving the solvent water molecules.     

Elucidating the biosynthetic pathway for the polyketide-nonribosomal peptide collismycin A: mechanism for formation of the 2,2'-bipyridyl ring

The gene cluster for the bipyridyl compound collismycin was characterized from Streptomyces sp. CS40. Sequence analysis of a 46.7 kb DNA region revealed 27 open reading frames, 23 of which are involved in collismycin biosynthesis. Eight insertional inactivation mutants were generated in the sequenced region to prove its involvement in collismycin biosynthesis, define the boundaries of the cluster, functionally characterize some genes, and isolate two biosynthetic intermediates. A model for collismycin biosynthesis--which includes the conversion of lysine into picolinic acid, participation of a polyketide synthase-non-ribosomal peptide synthetase system, and some further modifications--is proposed. The biosynthetic pathway would include an unusual NRPS-mediated incorporation of a cysteine residue, possibly through a Michael addition and followed by the extension of the peptide chain by leucine incorporation and later removal by amidohydrolase.