Determination of the two major endocannabinoids in human plasma by μ-SPE followed by HPLC-MS/MS

Endocannabinoids (ECs) are endogenous compounds that interact with type-1 and type-2 cannabinoid receptors (CB₁ and CB₂), as well as non-cannabinoid receptors. The multitude of roles attributed to ECs makes them an emerging target of pharmacotherapy for a number of disparate diseases. Here a high-throughput bioanalytical method based on micro SPE (μ-SPE) followed by LC-MS/MS analysis for the simultaneous determination of the two major endocannabinoids 2-arachidonoylglycerol (2-AG) and N-arachidonoylethanolamine (anandamide, AEA) in human plasma is presented. The chromatographic conditions obtained with the fused-core column allowed a good separation in 10 min also of the AG isomers. A very simple and reliable extraction has been optimised by means of C18-modified tips: it requires only 100 μL of plasma and allows the use of minimal volumes of organic solvent. The present method allows a rapid and effective clean-up, which also minimises the isomerisation of 2-AG. The whole procedure has been validated following the FDA guidelines for bioanalytical methods validation: the satisfactory recovery values, the negligible matrix effect and the good values of accuracy and reproducibility make it a simple and high-throughput analytical tool for clinical and biochemical studies on endocannabinoid signaling in humans.

Pyrazole‐substituted Near‐infrared Cyanine Dyes Exhibit pH‐dependent Fluorescence Lifetime Properties

Near‐infrared heptamethine cyanine dye is functionalized with pyrazole derivatives at the meso‐position to induce pH‐dependent photophysical properties. The presence of pyrazole unsubstituted at ¹N‐position is essential to induce pH‐dependent fluorescence intensity and lifetime changes in these dyes. Replacement of meso‐chloro group of cyanine dye IR820 with ¹N‐unsubstituted pyrazole resulted in the pH‐dependent fluorescence lifetime changes from 0.93 ns in neutral media to 1.27 ns in acidic media in DMSO. Time‐resolved emission spectra (TRES) revealed that at lower pH, the pyrazole consists of fluorophores with two distinct lifetimes, which cor‐responds to pH‐sensitive and non‐pH‐sensitive species. In contrast, ¹N‐substituted pyrazoles do not exhibit pH response, suggesting excited state electron transfer as the mechanism of pH‐dependent fluorescence lifetime sensitivity for this class of compounds.     

Microwave‐Assisted Solid‐Phase Synthesis of a 1,2‐Disubstituted Benzimidazole Library by Using a Phosphonium Linker

An efficient and rapid microwave‐assisted solid‐phase method for the synthesis of 5‐methyl‐1,2‐disubstituted benzimidazoles derivatives has been developed. The phosphonium linker, obtained by reaction between polymer‐supported triphenylphosphine and 4‐fluoro‐3‐nitrobenzyl iodide, underwent aromatic substitution with primary amines, followed by one‐pot reaction with aldehydes in the presence of SnCl₂·2H₂O, yielded the benzimidazole system under microwave irradiation. The final products were released from the resin with NaOH under microwave irradiation and were obtained in high purity and good overall yield.     

The Calculus of HLB Values of Polyoxyethylene Fatty Acid Esters from Quality Control Data

In this article, we obtained equations that permit us to calculate the hydrophilic-lipophilic balance (HLB) value of polyoxyethylene esters from quality control data of the raw materials (fatty acids and polyethylene glycol) and the finished product (surfactant). These data include the acid value of the fatty acid, the hydroxyl value of the polyethylene glycol, and the hydroxyl value of the surfactant. These calculations permit us, moreover, to know the mean molecular masses of fatty acids, of polyethylene glycol, of monoester and diester, and the proportion of polyoxyethylene monoester and polyoxyethylene diester.     

Development of a high temperature treatment device for spent nuclear fuel

Novel reprocessing schemes and techniques are the focus of the Euratom FP7 project “Actinide Recycling for Separation and Transmutation” (ACSEPT), where the Paul Scherrer Institute (PSI) is represented in the pyrochemical domain. The subject of investigation is the selective separation of fission products (FPs) from spent nuclear fuel as a head-end step to either classical hydro based or pyro processes which are not yet applied on a large scale. The selective removal of FPs that are major contributors to the overall radiation dose or bear great potentials in terms of radiotoxicity (i.e. cesium or iodine), is advantageous for further processes. At PSI a device was developed to release volatile FPs by means of inductive heating. The heating up to 2,300 °C promotes the release of material that is further transported by a carrier gas stream into an inductively coupled plasma mass spectrometer for online detection. The carrier gas can be either inert (Ar) or can contain reducing or oxidizing components like hydrogen or oxygen, respectively. The development of the device by computer aided engineering approaches, the commissioning and evaluation of the device and data from first release experiments on a simulated fuel matrix are discussed.     

Regioselective Sequential Additions of Nucleophiles and Electrophiles to Perfluoroalkylfullerenes: Which Cage C Atoms Are the Most Reactive and Why?

The sequential addition of CN^? or CH₃^? and electrophiles to three perfluoroalkylfullerenes (PFAFs), C_s‐C₇₀(CF₃)₈, C₁‐C₇₀(CF₃)₁₀, and C_s‐p‐C₆₀(CF₃)₂, was carried out to determine the most reactive individual fullerene C atoms (as opposed to the most reactive C?C bonds, which has previously been studied). Each PFAF reacted with CH₃^? or CN^? to generate metastable PFAF(CN)^? or PFAF(CH₃)₂^2? species with high regioselectivity (i.e., one or two predominant isomers). They were treated with electrophiles E⁺ to generate PFAF(CN)(E) or PFAF(CH₃)₂(E)₂ derivatives, also with high regioselectivity (E⁺=CN⁺, CH₃⁺, or H⁺). All of the predominant products, characterized by mass spectrometry and ¹⁹F NMR spectroscopy, are new compounds. Some could be purified by HPLC to give single isomers. Two of them, C₇₀(CF₃)₈(CN)₂ and C₇₀(CF₃)₁₀(CH₃)₂(CN)₂, were characterized by single‐crystal X‐ray diffraction. DFT calculations were used to propose whether a particular reaction is under kinetic or thermodynamic control.     

Synthesis,Structure, and Theoretical Study of Trifluoromethyl Derivatives of C84(23) Fullerene

Trifluoromethylation of a higher fullerene mixture with CF₃I was performed in ampoules at 550 °C. HPLC separation followed by crystal growth and X‐ray diffraction study resulted in the structure elucidation of nine CF₃ derivatives of D_2d‐C₈₄ (isomer 23). The molecular structures of C₈₄(23)(CF₃)₄, C₈₄(23)(CF₃)₈, C₈₄(23)(CF₃)₁₀, C₈₄(23)(CF₃)₁₂, two isomers of C₈₄(23)(CF₃)₁₄, two isomers of C₈₄(23)(CF₃)₁₆, and C₈₄(23)(CF₃)₁₈ were discussed in terms of their addition patterns and the relative formation energies. Extensive theoretical DFT calculations were performed to identify the most stable molecular structures. It was found that the addition of CF₃ groups to the C₈₄(23) fullerene is governed by two main rules: no additions in positions of triple hexagon junctions and predominantly para additions in C₆(CF₃)₂ hexagons on the fullerene cage. The only exception with an isolated CF₃ group in C₈₄(23)(CF₃)₁₂ is discussed in more detail.     

[6,6]‐Open and [6,6]‐Closed Isomers of C70(CF2): Synthesis,Electrochemical and Quantum Chemical Investigation

Novel difluoromethylenated [70]fullerene derivatives, C₇₀(CF₂)_n (n=1–3), were obtained by the reaction of C₇₀ with sodium difluorochloroacetate. Two major products, isomeric C₇₀(CF₂) mono‐adducts with [6,6]‐open and [6,6]‐closed configurations, were isolated and their homofullerene and methanofullerene structures were reliably determined by a variety of methods that included X‐ray analysis and high‐level spectroscopic techniques. The [6,6]‐open isomer of C₇₀(CF₂) constitutes the first homofullerene example of a non‐hetero [70]fullerene derivative in which functionalisation involves the most reactive bond in the polar region of the cage. Voltammetric estimation of the electron affinity of the C₇₀(CF₂) isomers showed that it is substantially higher for the [6,6]‐open isomer (the 70‐electron π‐conjugated system is retained) than the [6,6]‐closed form, the latter being similar to the electron affinity of pristine C₇₀. In situ ESR spectroelectrochemical investigation of the C₇₀(CF₂) radical anions and DFT calculations of the hyperfine coupling constants provide evidence for the first example of an inter‐conversion between the [6,6]‐closed and [6,6]‐open forms of a cage‐modified fullerene driven by an electrochemical one‐electron transfer. Thus, [6,6]‐closed C₇₀(CF₂) constitutes an interesting example of a redox‐switchable fullerene derivative.     

Membrane characterization and solute diffusion in porous composite nanocellulose membranes for hemodialysis

The membrane and solute diffusion properties of Cladophora cellulose and polypyrrole (PPy) functionalized Cladophora cellulose were analyzed to investigate the feasibility of using electroactive membranes in hemodialysis. The membranes were characterized with scanning electron microscopy, ζ-potentiometry, He-pycnometry, N₂ gas adsorption, and Hg porosimetry. The diffusion properties across the studied membranes for three model uremic toxins, i.e. creatinine, vitamin B12 and bovine serum albumin, were also analyzed. The characterization work revealed that the studied membranes present an open structure of weakly negatively charged nanofibers with an average pore size of 21 and 53 nm for pristine cellulose and PPy-Cladophora cellulose, respectively. The results showed that the diffusion of uremic toxins across the PPy-Cladophora cellulose membrane was faster than through pure cellulose membrane, which was related to the higher porosity and larger average pore size of the former. Since it was found that the average pore size of the membranes was larger than the hydrodynamic radius of the studied model solutes, it was concluded that these types of membranes are favorable to expand the Mw spectrum of uremic toxins to also include conditions associated with accumulation of large pathologic proteins during hemodialysis. The large average pore size of the composite membrane could also be exploited to ensure high-fluxes of solutes through the membrane while simultaneously extracting ions by an externally applied electric current.