Preconcentration and determination of methyl methacrylate by dispersive liquid–liquid microextraction

This article describes the preconcentration of methyl methacrylate in produced water by the dispersive liquid–liquid microextraction using extraction solvents lighter than water followed by gas chromatography. In the present experiments, 0.4 mL dispersive solvent (ethanol) containing 15.0 μL extraction solvent (toluene) was rapidly injected into the samples and followed by centrifuging and direct injection into the gas chromatograph equipped with flame ionization detector. The parameters affecting the extraction efficiency were evaluated and optimized including toluene (as extraction solvent), ethanol (as dispersive solvent), 15 μL and 0.4 mL (as the volume of extraction and dispersive solvents, respectively), pH 7, 20% ionic strength, and extraction's temperature and time of 20°C and 10 min, respectively. Under the optimum conditions, the figures of merits were determined to be LOD = 10 μg/L, dynamic range = 20–180 μg/L, RSD = 11% (n = 6). The maximum recovery under the optimized condition was determined to be 79.4%.     

Novel Uncatalyzed Hydrocyanation of Ketones utlizing Tetrachlorosilane–Potassium Cyanide Reagent

A combination of tetrachlorosilane and potassium cyanide (in situ trichlorosilyl cyanide) was found to work efficiently for hydrocyanation of ketones to afford the corresponding cyanohydrins in high yield under mild conditions.     

Mesophase behaviour of laterally di-fluoro-substituted four-ring compounds

Four new groups of the di-fluoro-substituted 4-(2′-(or 3′)-fluoro phenylazo)-2-(or 3-) fluoro phenyl-4″-alkoxyphenylazo benzoates (In–IVn) were prepared and investigated for their mesophase behaviour. An alkoxy group of variable chain length (n = 6, 10 and 14 carbons) is attached to the terminal phenylazo benzoate moiety, and two lateral fluoro substituents are attached individually with different orientations to the other two adjacent rings. The molecular structures of the prepared compounds were confirmed by Fourier transform infrared spectroscopy and ¹H NMR spectroscopy. The study aims to investigate the steric effect of the spatial orientation and relative positions of the two lateral fluorine atoms on the mesomorphic properties in their pure states. The mesophase behaviour was investigated via differential scanning calorimetry and mesophases were identified by polarised light microscopy. The investigation shows that these compounds exhibit high enantiotropic mesophases (SmC and N) and broad mesophase temperature range. The type and stability of the mesophase depends on the length of the terminal alkoxy chain and the position the two fluoro substituents. A comparison between these investigated compounds with their corresponding three-ring analogues was discussed.     

Oxidative Coupling of Thiols to Disulfides with Ti(IV) in the Presence of NaI under Air Atmosphere

Ti(IV) as TiCl₃(O₃SCF₃) and TiO(O₂CCF₃)₂ are used as efficient catalysts for oxidative coupling of aliphatic, aromatic and heteroaromatic thiols to their disulfides in the presence of NaI under air atmosphere.     

Kinetics of chlorine isotope exchange reaction between sodium chloride-36 and triphenyltin chloride in mixed solvents

Isotope exchange reaction between NaCl-36 and triphenyltin chloride in dioxane-water (8020% w/w) and ethanol-water (9010% w/w) mixed solvents has been studied at 25, 35 and 50 °C. The exchange reaction was found to proceed via a bimolecular S_N2, limiting mechanism with reaction rates depending on the solvent used. Inhibition of the exchange in ethanol-water is probably due to solvation of chloride ion through hydrogen bond formation. The rate laws for the exchange reactions are: R_e=3.24×10⁹ e^–65550/RT [Rh₃SnCl] [NaCl] in dioxanewater and R_e=6.61×10⁸ e^–69600/RT [Ph₃SnCl] [NaCl] in ethanol-water, where is the degree of dissociation of NaCl and R_e is the rate of exchange in mol l^–1 s^–1. The activation parameters H^*, S^* and G^* are reported.     

Manganese porphyrins/mesoporous amberlyst 15 nanocomposites: Robust biomimetic catalysts for aqueous oxidation of olefins

In this study, the manganese complexes of N-methylated meso-tetra(2-, 3-, or 4 pyridyl)porphyrins, immobilized into the pores of the sodium salt of mesoporous amberlyst 15 nanoparticles (nanoAmbSO₃Na), nanoAmbSO₃@MnT(2-MePy)P (OAc), nanoAmbSO₃@MnT(3-MePy)P (OAc), and nanoAmbSO₃@MnT(4-MePy)P (OAc), were synthesized and characterized by field-emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDX), thermal gravimetric analysis (TGA), nitrogen adsorption/desorption porosimetry analysis, and diffuse reflectance UV–vis spectroscopy. FESEM images revealed a particle size less than ~40 nm for the nanocomposites. The results of BET are in accord with the occupation of the larger pores of the polymer matrix in the case of MnT(2-MePy)P (OAc) as the most sterically demanding metalloporphyrin of the series, and the smaller pores in the case of the other ones. The immobilized manganese porphyrins were used as catalysts for the oxidation of olefins with sodium periodate in the presence of imidazole (ImH) as the co-catalyst. The negligible oxidative destructions of the immobilized manganese porphyrins under the oxidative conditions allowed the comparison of the inherent catalytic activity of the metalloporphyrins, decreased as nanoAmbSO₃@MnT(4-MePy)P (OAc) > nanoAmbSO₃@MnT(3-MePy)P (OAc) ≫ nanoAmbSO₃@MnT(2-MePy)P (OAc). Contrary to the general belief that electron-deficient metalloporphyrins are more efficient catalysts than the electron-rich ones, the most electron-deficient metalloporphyrin of the series, that is, nanoAmbSO₃@MnT(2-MePy)P (OAc), showed the lowest catalytic activity. Due to the high oxidative stability of the immobilized manganese porphyrins, ring opening of epoxide competes with the epoxidation reaction to decrease the yield of epoxide at longer reaction times than the optimized one.     

Electrophoretically deposited sulfonated poly(styrene-co-divinylbenzene) on a screw for microextraction of cationic dyes from aqueous solutions

In the present work, a novel solid-phase microextraction on a screw (MES) was employed to extract cationic dyes (malachite green, methylene blue, and rhodamine B) from food samples and fish breeding pool water. The sulfonated poly(styrene-co-divinylbenzene) was electrophoretically deposited on the surface of the grooves of a screw. Then the screw was placed inside a silicon tube as a holder to create a channel to run a test solution through it. The extracted dyes on the coated screw were eluted by a suitable eluent. High-performance liquid chromatography with an ultraviolet/visible detector was utilized for the separation and analysis of the analytes. The effective parameters of the analyte extraction efficiency were optimized. Under optimum conditions, the limits of detection were 0.15 μg/L, and calibration curves were linear in the range of 0.50–250.00 μg/L, with coefficients of determination > 0.989 for all studied dyes. The relative standard deviations of intra and inter-day (n = 3) were in the range of 2.8%–7.0% and 7.0%–9.5%, respectively. The MES was applied as a simple and repeatable method with acceptable relative recoveries (82.0%–103.0%) for the determination of cationic dyes in grape nectar, ice pop, jelly powder, and fish breeding pool water.     

Interactions of the mitochondrial membrane rat liver D-3-hydroxybutyrate dehydrogenase with glass beads during adsorption chromatography. Relationships with the activation of the enzyme by phospholipids

D-3-Hydroxybutyrate dehydrogenase (BDH) is an NAD(+)-dependent dehydrogenase of the mitochondrial inner membrane involved in the energetic balance between the liver and peripheral organs in mammals. It allows the conversion of ketone bodies (acetoacetate and D-3-hydroxybutyrate) and it is one of the best documented lipid-requiring enzymes with a dependence on lecithins. After release of proteins from the membrane by phospholipase A2 treatment of salt-treated mitochondria, the rat liver enzyme is absorbed on controlled-pore glass beads. After batch washing, the enzyme, devoid of lipids (apoBDH), is specifically eluted at pH 8.05-8.15 with a 0.1 M Tris-1 M LiBr buffer under reducing conditions (5 mM dithiothreitol). It appears that during BDH absorption, the glass beads mimic the phospholipid surface of biomembranes.     

Highly functionalized pyrazolines from symmetric and asymmetric 1,2-disulfonylhydrazines: a combination of experimental and DFT perspectives

Chemistry of Heterocyclic Compounds - In this work, new pyrazole derivatives were prepared by one-pot three-component reaction emloying symmetric and asymmetric 1,2-disulfonyl-hydrazines,...     

Dosimetric investigations on radiation-induced Ag nanoparticles in a gel dosimeter

Journal of Radioanalytical and Nuclear Chemistry - Radiation-induced Ag° nanoparticles (NPs) in silver nitrate gel dosimeter incorporating various components was investigated in the dose range...