A high-order Monte Carlo algorithm for the direct simulation of Boltzmann equation

A high-order algorithm of the direct simulation Monte Carlo (DSMC) method, H-DSMC, has been developed to simulate rarefied flow regimes. The mth order Taylor series expansion has been employed to obtain a more generalized form of the time discretization for the collision part of Boltzmann equation. In the purposed algorithm, the higher order collision terms are introduced as well as higher order terms in the time step of the probabilistic coefficients. These newly implemented higher order terms improve the accuracy and efficiency of the solution and enhance the convergence rate quite significantly. Comparison between results of the classic DSMC method and the H-DSMC method shows the promising performance of the introduced technique.     

Involvement of type I and type II mechanisms in the linoleic acid peroxidation photosensitized by tiaprofenic acid

Analysis of the photomixtures resulting from irradiation of aqueous solutions of linoleic acid sensitized by tiaprofenic acid (TPA) or its major photoproduct (DTPA) by HPLC has shown the formation of all the four possible conjugated dienic hydroperoxides. According to laser flash photolysis experiments the rate constants for hydrogen abstraction from linoleic acid by the excited triplet states of TPA and DTPA are 2 x 10(5) and 3.2x 10(5) M(-1) s(-1), respectively. These data, together with the known rate constants for oxygen quenching of triplet (D)TPA and for the reaction of singlet oxygen with linoleic acid, show that the mechanism is mixed type I/type II. Finally, typical radical scavengers such as BHA and singlet oxygen quenchers such as DABCO and sodium azide are efficient quenchers of the triplet excited state of DTPA. This shows the risk of assigning mechanisms based on indirect 'evidences' using 'specific' additives.     

The estimation of the hydrophobic and electrostatic contributions to the free energy change upon cationic surfactants binding to Jack bean urease

The binding of a homologous series of n-alkyltrimethyl ammonium bromides with Jack bean urease (JBU) have been studied previously. It has been suggested that both electrostatic and hydrophobic interactions are involved in the formation of surfactant-protein complexes, but there is not any quantities analyzing method for resolution of their contributions in the process. In the present study, at first, the intrinsic Gibbs free energy of binding, ΔG_b,ν, has been calculated for these systems and the trend of variation for both binding sets have been interpreted on basis of cooperativity and hydrophobicity of surfactants. Subsequently, a novel approach has been introduced for estimation of electrostatic and hydrophobic interactions in ΔG_b,ν, by considering of this fact that ΔG_b,ν is the summation of electrostatic, ΔG_b,ν(ele), and hydrophobic, ΔG_b,ν(hyd), parts and considering this fact that just ΔG_b,ν(hyd) is a function of hydrocarbon tail length of surfactant (C_n). The results represents the higher positive rule of electrostatic interactions in binding affinity of first set and inhibiting rule of this interaction in the second binding set. The predominate driving force in the second binding set is entropy statistical effect, which arises from numerous number of binding sites in this set. A binding mechanism on basis of structural changes in JBU due to its interaction with cationic surfactants has also been proposed.     

A Facile and Efficient Synthesis of Arylsulfonamido‐Substituted 1,5‐Benzodiazepines and N‐[2‐(3‐Benzoylthioureido)aryl]‐3‐oxobutanamide Derivatives

A facile and efficient synthesis of 1,5‐benzodiazepines with an arylsulfonamido substituent at C(3) is described. 1,5‐Benzodiazepine, derived from the condensation of benzene‐1,2‐diamine and diketene, reacts with an arylsulfonyl isocyanate via an enamine intermediate to produce the title compounds of potential synthetic and pharmacological interest in good yields (Scheme 1). In addition, reaction of benzene‐1,2‐diamine and diketene in the presence of benzoyl isothiocyanate leads to N‐[2‐(3‐benzoylthioureido)aryl]‐3‐oxobutanamide derivatives (Scheme 2). This reaction proceeds via an imine intermediate and ring opening of diazepine. The structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this type of cyclization is proposed (Scheme 3).     

A Cheap and Efficient Methodology for the Solvent‐Free,One‐pot and Multi‐component Synthesis of 3,4‐Dihydropyrimidin‐2(1H)‐ones Catalyzed by Mesoporous NH4H2PO4/MCM‐48 and Comparison of Its Catalytic Efficacy with NH4H2PO4/MCM‐41

The catalytic efficiency of ammonium dihydrogenphosphate was evaluated in the two heterogeneous forms of NH₄H₂PO₄/MCM‐48 and NH₄H₂PO₄/MCM‐41, as mesoporous catalysts, in the solvent free synthesis of 3,4‐dihydropyrimidin‐2(1H)‐ones through one‐pot three‐component condensation of ethyl acetoacetate, an aryl aldehyde and urea. Different reaction parameters including catalytic efficacy, solvent effect, and urea concentration are considered.     

Interactions of hydrophilic silica nanoparticles and classical surfactants at non-polar oil-water interface

The interfacial and bulk properties of submicron oil-in-water emulsions simultaneously stabilised with a conventional surfactant (either lecithin or oleylamine) and hydrophilic silica nanoparticles (Aerosil?380) were investigated and compared with emulsions stabilised by either stabiliser. Emulsions solely stabilised with lecithin or oleylamine showed poor physical stability, i.e., sedimentation and the release of pure oil was observed within 3 months storage. The formation and long-term stability of silica nanoparticle-coated emulsions was investigated as a function of the surfactant type, charge, and concentration; the oil phase polarity (Miglyol?812 versus liquid paraffin); and loading phase of nanoparticles, either oil or water. Highly stable emulsions with long-term resistance to coalescence and creaming were formulated even at low lecithin concentrations in the presence of optimum levels of silica nanoparticles. The attachment energy of silica nanoparticles at the non-polar oil-water interface in the presence of lecithin was significantly higher compared to oleylamine in line with good long-term stability of the former compared to the sedimentation and release of oil in the latter. The attachment energy of silica nanoparticles at the polar oil-water interface especially in the presence of oleylamine was up to five-times higher compared to the non-polar liquid paraffin. The interfacial layer structure of nanoparticles (close-packed layer of particle aggregates or scattered particle flocs) directly related to the free energy of nanoparticle adsorption at both MCT oil and liquid paraffin-water interfaces.     

Protection of Alcohols and Phenols with Dihydropyran and Detetrahydropyranylation by ZrCl4

Alcohols and Phenols are protected efficiently with dihydropyran(DHP) in the presence of catalytic amounts of zirconium tetrachloride in dichloromethane. Deprotection of THP-ethers is also afforded in a methanolic solution at room temperature.     

Kinetic Study of the Electro-Catalytic Oxidation of Hydrazine on Cobalt Hydroxide Modified Glassy Carbon Electrode

Electrocatalytic oxidation of hydrazine was investigated on a cobalt hydroxide modified glassy carbon (CHM-GC) electrode in alkaline solution. The process of oxidation involved and its kinetics were established by using cyclic voltammetry, chronoamperometry techniques as well as steady state polarization measurements. In cyclic voltammetry (CV) studies, in the presence of hydrazine the peak current increase of the oxidation of cobalt hydroxide is followed by a decrease in the corresponding cathodic current. This indicates that hydrazine is oxidized on the redox mediator that is immobilized on the electrode surface via an electrocatalytic mechanism. A mechanism based on the electrochemical generation of Co(IV) active sites and their subsequent consumption by the hydrazine in question was also investigated.     

Modeling and optimization of simultaneous degradation of rhodamine B and acid red 14 binary solution by homogeneous Fenton reaction: a chemometrics approach

This study aimed to propose a mathematical method to investigate and optimize the simultaneous elimination process of multiple organic pollutants using the Fenton process. Hence, the treatment of rhodamine B (RB) and acid red 14 (AR14) dyes in their binary solution was studied. Multivariate curve resolution alternating least square (MCR-ALS), a novel chemometric method, was applied along with correlation constraints to resolute the UV-Vis spectrophotometric data, enabling quantification of investigated dyes despite a high spectral overlapping. Response surface methodology was adopted to assess the model and optimize individual and interactive effects of three independent factors (Fe²⁺, H₂O₂ and initial pH) on the simultaneous elimination of RB and AR14. The values of the regression coefficient for RB and AR14 were determined as 98.48 and 98.67 percent, respectively, revealing the reliability of the obtained polynomial models to predict decolorization efficiencies. Desirability function was employed to optimize the independent variables to attain the highest possible degradation performance for both dyes in their binary solution. At the optimum point of operation ([Fe²⁺] = 143.88 mg/L, [H₂O₂] = 126.89 mg/L and pH = 3.71), degradation efficiencies of RB and AR14 were found as 81.58% and 80.22%, respectively, which were nearly identical to the experimental results.