A comparative study of myo-inositol quantification using LCmodel at 1.5 T and 3.0 T with 3 D 1H proton spectroscopic imaging of the human brain

Myo-inositol is a strongly coupled system and resonates at four chemical shift positions. At 1.5 T, only the singlet component at 3.57 ppm is detected. However, at 3 T this resonance is resolved into its components at 3.55 ppm and 3.61 ppm. Due to the increased spectral resolution and signal-to-noise ratio, it is anticipated that the quantification of myo-inositol should improve at 3 T. Using data from normal controls and the LCmodel quantification procedure, we found that the quantification precision, reproducibility and detection sensitivity of myo-inositol is significantly better at 3 T relative to 1.5 T.     

Use of polyacrylamide-grafted<Emphasis Type="Italic"> Plantago psyllium</Emphasis> mucilage as a flocculant for treatment of textile wastewater

The chemical modification of Plantago psyllium mucilage (Psy), an anionic polysaccharide, was done by grafting polyacrylamide (PAM) chains to prepare a graft-copolymer (Psy-g-PAM). It was synthesized in the presence of nitrogen using ceric ammonium nitrate–nitric acid redox initiator and characterized by IR spectroscopy, scanning electron microscopy and viscosity measurements. This grafted copolymer was tested for its flocculation efficiency in textile wastewater by the standard Jar test method. The effects of polymer concentration, pH and contact time on the percentage removal of solid wastes [total dissolved solids (TDS) and suspended solids (SS)] and color from textile effluent are reported. The optimum dose was found to be 1.6 mg l^–1, at which maximum solid removal (SS and TDS) was seen. The most suitable pH for TDS and color removal was neutral (7.0) and for SS removal alkaline pH (9.2) was found to be most suitable. The optimum treatment duration for solid waste removal was 5 h. The X-ray diffraction analysis of Psy-g-PAM and solid waste before and after treatment suggests the interaction of the solid waste and Psy-g-PAM copolymer.     

Electrical switching studies on As<Subscript>40</Subscript>Te<Subscript>60-x</Subscript>Se<Subscript>x</Subscript> and As<Subscript>35</Subscript>Te<Subscript>65-x</Subscript>Se<Subscript>x</Subscript> glasses

The I–V characteristics of bulk As₄₀Te_60-xSe_x and As₃₅Te_65-xSe_x glasses have been studied with a current sweep of 0–18 mA-0, over a wide range of compositions (4≤x≤22). All the glasses studied showed a threshold electrical switching behaviour. The number of switching cycles withstood by the samples has been found to depend on the ON-state current. It is seen that the switching voltages increase with increase in selenium content. Further, the switching voltages are found to be almost independent of the thickness of the sample (d), in the range 0.18–0.3 mm. Also, the switching voltages and the number of switching cycles withstood by the samples are found to decrease with temperature. Received: 6 November 2002 / Accepted: 8 November 2002 / Published online: 29 January 2003 RID="*" ID="*"Corresponding author. Fax: +91-80/360-0135, E-mail: sasokan@isu.iisc.ernet.in     

Thermal properties of 15-mol% gadolinia doped ceria thin films prepared by pulsed laser ablation

Thermal properties of 15-mol% gadolinia doped ceria thin films (Ce_0.85Gd_0.15 O_1.925) prepared by pulsed laser ablation on silicon substrates in the temperature range 473–973 K are presented. Thermal diffusivities and thermal conductivities were evaluated using photoacoustic spectroscopy. The influence of grain size on thermal properties of the films as a function of deposition temperature is studied. It is observed that the thermal diffusivity and the conductivity of these films decreases up to 873 K and then increases with substrate temperatures. The thermal properties obtained in these films are discussed on the basis of influence of grain size on phonon scattering.     

Thermodynamic and kinetic aspects on the selective surface oxidation of binary, ternary and quarternary model alloys

Segregation and selective oxidation phenomena of minor alloying elements during annealing of steel sheets lead to the formation of bare spots after hot dip galvanizing. In order to understand the influence of common alloying elements on the surface chemistry after annealing, model alloys of binary (Fe-2Si, Fe-2Mn and Fe-0.8Cr), ternary (Fe-2Mn-2Si, Fe-2Mn-0.8Cr and Fe-2Si-0.8Cr) and quarternary (Fe-2Mn-2Si-0.8Cr) systems were investigated. The specimens were annealed for 60 s at 820 °C in N₂-5% H₂ gas atmospheres with different dew points −80 and −40 °C, respectively. Surface chemistry of the annealed specimens was obtained by using X-ray photoelectron spectroscopy (XPS). The field emission scanning electron microscopy (FE-SEM) was used to view surface morphology. At low dew point −80 °C, apart from the thermodynamical calculations such as solubility product of oxides and their critical solute concentrations, kinetics play a decisive role on the selective oxidation, i.e. oxygen competition. As expected, the amount of external selective oxidation of alloying elements are well pronounced at higher dew point −40 °C. An attempt has been made to explain the dominant process of Si and Mn on Cr-oxidation and segregation. It is observed that annealing of quarternary system at higher dew point shifts the Cr-oxidation from external to internal.     

EPR and photoacoustic studies on 30 kev H ion-implanted n-GaAs

Electron paramagnetic resonance (EPR) measurements are carried out on the 30 keV H⁺ion-implanted, Si-doped GaAs(1 0 0) for various doses from 10¹⁴ to 10¹⁷ cm⁻². The results are correlated with photoacoustic and photoluminescence measurements. All the measurements confirm the sign change of charge carrier at a dose of 10¹⁵ cm⁻².     

Thermal and photochemical Wallach rearrangement of azoxybenzene in zeolite cages

Acidic zeolites HY and CaY catalyse the Wallach rearrangement of azoxybenzene (I) leading mainly to the formation of para-hydroxyazobenzene (II) and ortho-hydroxyazobenzene (III). In this transformation, increasing the loading level of I results in the formation of a larger amount of para-isomer. As observed in isotropic media, photochemical Wallach rearrangement in the presence of various cation-exchanged faujasites results in the predominant formation of the ortho-isomer from the S₁ state and this rules out any appreciable heavy atom effect.     

Enhancement of thermopower in the highT c superconductor YBa2Cu3O7 and related compounds

The absolute thermopower of single phase YBa₂Cu₃O₇ and Y_0.8Er_0.2Ba₂Cu₃O₇ has been measured in the range 250 K to the superconducting transition temperature. It is found that these compounds show a large enhancement of thermopower in the range 150 K down toT _c. This enhancement shows a steep exponential drop as the temperature increases from the transition temperature. The temperature variation of the enhancement is too steep to be accounted for by electron-phonon or electron-local structural excitation mechanisms.     

Ignition and increase in Pease limit on current in an ohmically heated high densityZ-pinch

Energetics of an ohmically heated deuterium-tritium high densityZ-pinch has been computed taking into account the energy deposited by the alpha particles produced by fusion. As a result, at higher plasma densities (>10²⁷/m³) and temperatures (>4keV), the pinch current can cross Pease limit and the plasma can get ignited, yielding higher energy gain and neutron yield in a shorter confinement time.