Selective growth of ag nanowires on Si(111) surfaces by electroless deposition

Electroless deposition of Ag on atomically flat H-terminated Si(111) surfaces in aqueous alkaline solutions containing Ag ions produced two different sizes of Ag nanowires along atomic step edges: (1) a narrow nanowire of 10 nm in width and 0.5 nm in height and (2) a wide nanowire of 35 nm in width and 11 nm in height. The narrow and wide nanowires were formed by immersion in the solutions containing less than 1 ppb and 8 ppm dissolved-oxygen concentrations, respectively. This result indicates that the dissolved oxygen initiates the formation of Ag nucleation sites and that the fabrication method has a possibility of controlling the size of Ag nanowires.     

Reaction of sulphoximides with diazomalonate in the presence of Cu-salt : A new synthesis and stereochemistry of optically active oxosulphonium ylides

Sulphoximides (Ia–Ie) were found to react with dimethyl diazomalonate (DDM) in the presence of a catalytic amount of Cu-salts affording the corresponding oxosulphonium ylides in moderate yields. The reaction did not proceed at all under irradiation of UV light. (?)-Methylphenyloxosulphonium bis(methoxycarbonyl)-methylide ((?)-IIb) was obtained from (+)-(S)-methylphenylsulphoximide ((+)-(S)-Ib) together with (?)-(S)-methyl phenyl sulphoxide ((?)-(S)-IIIb) by this reaction. Hydrolysis of (?)-IIb gave (+)-methylphenyloxosulphonium methoxycarbonylmethylide ((+)-IIf) which was converted to (?)-(S)-IIIb upon treatment with dibenzoylethylene. Stereochemical cycle starting from (+)-(S)-Ib to (?)-(S)-IIIb was established and the absolute configurations of both ylides, (?)-IIb and (+)-IIf were assigned as (R)-configuration. The stereochemical courses, namely from (+)-(S)-Ib or (?)-(S)-IIIb to (?)-(R)-IIb or (+)-(R)-IIf to (?)-(S)-IIIb were determined as retention processes. The optical purities of the oxosulphonium ylides obtained from both reactions, (+)-(S)-Ib→(?)-(R)-IIb and (?)-(S)-IIIb→(?)-(R)-IIb, were almost equal. These results indicate that the mechanism of the reaction of sulphoximides with carbenes (or carbenoids) involves the initial formation of the sulphoxides which react subsequently with carbenes to afford the final products.     

Crystal structure of poly(p-benzamide)

Redetermination of the crystal structure of poly(p-benzamide) was made by using newly collected intensity data. The molecular conformation is TCTC, where the internal rotation angles about the N? C bond of the amide group and about the virtual bond of N-phenyl-C are T (trans) and C (cis) conformations, respectively. Two molecular chains pass through a rectangular unit cell with dimension, a = 7.75 Å, b = 5.30 Å, c (fiber axis) = 12.87 Å, and the space group, P2₁2₁2₁-D. The reflection observed at the spacing of 010 may be attributed to the reflection due to another crystal polymorph or the diffuse scattering due to disorder. © 1993 John Wiley & Sons, Inc.     

High resolution capillary gas chromatographic hydrocarbon-type analysis of naphtha and gasoline

A slightly modified, commercially available high resolution capillary gas chromatograph and a PC-based data processing system running proprietary software (“PONA”) have been employed in the development of a system for petroleum type analysis which would be equivalent or superior to the FIA (fluorescent indicator adsorption) method in terms of ease of use and the speed, variety, and accuracy of the analytical data produced. The system is capable of performing identification and quantitation of most of the individual components in a complex gasoline sample consisting of more than 230 components and can report weight percentage and/or volume percentage for each component as well as types by carbon number (e.g., isoparaffins, normal paraffins, olefins, naphthenes, aromatic compounds) within a ca. 70 minute analysis cycle. Precolumn sulfonation to trap olefins and aromatic compounds has been used as an complementary technique to the basic mass spectrometric identification of components of interest. The estimation of correction factors for weight percentage (or volume percentage) calculation are also discussed. Comparisons are made between this system and others, and the results indicate that the proposed method supersedes the conventional method employing FIA.     

A novel method for preparation of 2-(methyl- or phehnylthio)alkanoic esters

Ethyl 2-acetylalkanoate gave ethyl 2-(methyl- or phenylthio)alkanoate in high yield on treatment wiht CH₃SSO₂CH₃, PhSSO₂Ph, or PhSSPh in the presence of small excess of EtONa in EtOH. Application of the present method to synthesis of pellitorine and the queen substance is also described.     

Measurements of 127I M?ssbauer spectra for iodine compounds

127I M?ssbauer spectra of good quality were obtained at 20 K using a Zn127mTe source produced by high flux neutron irradiation of 66Zn-126Te at reactor core. The M?ssbauer spectra for KI and some iodine(III) compounds with absorption intensity of about 5% suggest that the 127I M?ssbauer spectroscopy is useful in elucidating the bonding nature of the iodine compounds. Preparative method of the M?ssbauer source and experimental technique are reported in detail.     

Distribution and behavior of long-lived radioiodine in soil

The concentration of¹²⁹I in soil in Japan was determined by neutron activation analysis. For the activation analysis, pre-irradiation chemical separation of the iodine was carried out by acid decomposition and distillation and post-irradiation treatment was performed by ion exchange and solvent extraction. The concentration of stable iodine and¹³⁷Cs were also determined and compared with the behavior of¹²⁹I in soil.Soil samples from Ibaraki, Fukui, Fukushima, and Nagasaki Prefectures were analyzed and¹²⁹I was detected in amounts ranging from 10^–7 to 10^–5 Bq/g soil in uncultivated surface soil. There are apparently small variations in the¹²⁹I concentrations in each of the regions analyzed.From depth profile studies in sandy soil, the iodide form of¹²⁹I was found to migrate downward at a relatively rapid rate while other species remain longer in the surface soil.     

Aromatic H／D Exchange Reaction Catalyzed by Groups 5 and 6 Metal Chlorides

Groups 5 and 6 metal chlorides such as MoCl5, WCI6, NbCl5 and TaCl5 were found to be simple and very efficientcatalysts for the aromatic H/D exchange reactions. Compared with other metal chlorides such as ZnCl2, SnCl4 and TiCl4, groups 5 and 6 metal chlorides showed better catalytic activity in the H/D exchange reaction of naphthalene with C6D6. Deuteration of anthracene using MoC15 as a catalyst proceeded within 24 h at room temperature. Other aromatic compounds such as toluene, diphenylmethane and 1,1,2-triphenylethane were also deuterated smoothly in C6D6 within 24 h at room temperature.     

Raman spectra of stilbene negative ions in tetrahydrofuran solution

Raman spectra of stilbene mono- and di-negative ions in tetrahydrofuran solution were obtained by Ar⁺ laser exciting lines. A considerable frequency shift was observed for several vibrations in the successive steps: stilbene → (stilbene)^? → (stilbene)^2?. The observed shift is discussed in a simple VB scheme, particularly in comparison with the results on anthracene negative ions. The resonance Raman effect was striking for both ions with intensity maxima at the exciting wavelengths close to the absorption maxima.