Functionalized pyrolytic highly oriented graphite polymer film for surface‐assisted laser desorption/ionization mass spectrometry in environmental analysis

The pyrolytic highly oriented graphite polymer film (PGS) was first employed to analyze low‐mass analytes in environmental analysis by surface‐assisted laser desorption/ionization mass spectrometry (SALDI‐MS). PGS is a synthetic uniform and highly oriented graphite polymer film with high thermal anisotropic conductivity. We have found that negative ion mode SALDI‐MS using oxidized PGS (PGS‐SALDI‐MS) can be used to detect [M–H]^? ions from perfluorooctanoic acid (PFOA) and other perfluoroalkylcarboxylic acids when the PGS surface is modified with the cationic polymer polyethyleneimine (PEI). The signal intensity of PFOA when employing the PEI modification showed a ten‐fold increase over that obtained from desorption/ionization on porous silicon (DIOS). PFOA was quantified using PGS‐SALDI‐MS and the calibration curve showed a wide linear dynamic range of response (20–1000 ppb). The combination of atmospheric pressure ionization and PGS (AP‐PGS‐SALDI) showed greater signal intensity than vacuum PGS‐SALDI for deprotonated PFOA. Several other environmentally important chemicals, including perfluoroalkylsulfonic acid, pentachlorophenol, bisphenol A, 4‐hydroxy‐2‐chlorobiphenyl, and benzo[a]pyrene, were also successfully used to evaluate PGS‐SALDI‐MS. In addition, we found that nonafluoro‐1‐butanesulfonic acid was able to produce protonated peptides in positive ion PGS‐SALDI‐MS, but that perfluoropentanoic acid and trifluoroacetic acid were not. It is suggested that perfluoroalkylsulfonic acids are better protonating agents than perfluoroalkylcarboxylic acids in SALDI‐MS. Copyright © 2009 John Wiley & Sons, Ltd.     

Surface structures and osteoblast response of hydrothermally produced CaTiO3 thin film on Ti-13Nb-13Zr alloy

This study investigated the surface characteristics and in vitro biocompatibility of a titanium (Ti) oxide layer incorporating calcium ions (Ca) obtained by hydrothermal treatment with or without post heat-treatment in the Ti-13Nb-13Zr alloy. The surface characteristics were evaluated by scanning electron microscopy, thin-film X-ray diffractometry, X-ray photoelectron spectroscopy, atomic force microscopy and contact angle measurements. In vitro biocompatibility of the Ca-containing surfaces was assessed in comparison with untreated surfaces using a pre-osteoblast cell line. Hydrothermal treatment produced a crystalline CaTiO₃ layer. Post heat-treatment at 400 °C for 2 h in air significantly decreased water contact angles in the CaTiO₃ layer (p < 0.001). The Ca-incorporated alloy surfaces displayed markedly increased cell viability and ALP activity compared with untreated surfaces (p < 0.001), and also an upregulated expression of various integrin genes (α1, α2, α5, αv, β1 and β3) at an early incubation time-point. Post heat-treatment further increased attachment and ALP activity in cells grown on Ca-incorporated Ti-13Nb-13Zr alloy surfaces. The results indicate that the Ca-incorporated oxide layer produced by hydrothermal treatment and a simple post heat-treatment may be effective in improving bone healing in Ti-13Nb-13Zr alloy implants by enhancing the viability and differentiation of osteoblastic cells.     

Equiaffine immersions of general codimension and its transversal volume element map

With an equiaffine immersion of codimension 1 into the affine space with the natural equiaffine structure, the conormal map is associated. In this paper, for an equiaffine immersion of general codimension into the space, we shall define the map corresponding to the conormal map, which is called the transversal volume element map. And we shall investigate if, an equiaffine immersion of general codimension into the space is determined by its affine fundamental form and its transversal volume element map.     

Automated phosphoproteome analysis for cultured cancer cells by two-dimensional nanoLC-MS using a calcined titania/C18 biphasic column.

We have developed an on-line automated system for phosphoproteome analysis using titania-based phosphopeptide enrichment followed by nanoLC-MS/MS. Titania beads were prepared by calcination of commercial chromatographic titania beads at 800 degrees C to convert the crystalline structure. The obtained rutile-form titania exhibited higher selectivity in phosphopeptide enrichment than commercial titania, even in the absence of a competitive chelating reagent for non-phosphopeptides. For phosphoproteome analysis of human cervical cancer HeLa cells, tryptic digests of the cell extracts were directly injected into this on-line system, and 696 non-redundant phosphopeptides with 671 unambiguously determined phosphorylation sites, derived from 512 phosphoproteins, were successfully identified. This is the first successful application of an on-line automated phosphoproteome analysis system to complex biological samples.     

Catalytic asymmetric synthesis of descurainin via 1,3-dipolar cycloaddition of a carbonyl ylide using Rh2(R-TCPTTL)4

A catalytic asymmetric synthesis of descurainin has been achieved by incorporating an enantioselective 1,3-dipolar cycloaddition, a stereoselective alkene hydrogenation, an oxidation with Fremy’s salt and a regioselective demethylation with NbCl₅ as the key step. The 1,3-dipolar cycloaddition of a carbonyl ylide derived from tert-butyl 2-diazo-5-formyl-3-oxopetanoate with 4-hydroxy-3-methoxyphenylacetylene in the presence of dirhodium(II) tetrakis[N-tetrachlorophthaloyl-(R)-tert-leucinate], Rh₂(R-TCPTTL)₄, provided an 8-oxabicyclo[3.2.1]octane skeleton in 95% ee.     

A Facile Latex Agglutination Lectin Assay (LALA) for Weakly Binding Ligands

To apply the latex agglutination lectin assay (LALA) to carbohydrate ligands, monosaccharide derivatives were incorporated onto latex beads by various methods, and the usefulness of the resulting beads was evaluated. The best outcome, which resulted in aggregation with lectin concentrations of 1 to 4 μg/mL, was obtained when latex beads coated with bovine serum albumin were treated with divinylsulfone, a linker agent, and then with 2-aminoethyl glycosides. Monosaccharides with an amino or anomeric hydroxyl group other than N-acetylglucosamine were applicable in this direct LALA. For example, mannose- and 5-thiomannose-coupled latex beads showed aggregation with minimum concanavalin (ConA) concentrations of 4 and 32 μg/mL, respectively. An inhibition assay was more versatile than the direct LALA, and the standardized inhibition activity (EC⁰ ₅₀) was determined for several compounds. Representative EC⁰ ₅₀ data for mannose, methyl mannoside, and p-nitrophenyl mannoside (1, 0.12, and 0.06 mM, respectively) are consistent with those reported with other methods. We obtained EC⁰ ₅₀ values for some synthetic compounds with slightly different binding abilities to ConA, demonstrating a semiquantitative character of this method. The inhibition LALA can be performed without instrumentation or tedious derivatization and is thus suitable for the rapid evaluation of monovalent ligands prior to assemblage into multivalent ligands.     

Synthesis and magnetic properties of ALnO2 (A=Cu or Ag; Ln=rare earths) with the delafossite structure

Synthesis, structures, and magnetic properties of ternary rare earth oxides ALnO₂ (A=Cu or Ag; Ln=rare earths) have been investigated. CuLnO₂ (Ln=La, Pr, Nd, Sm, Eu) were synthesized by the direct solid state reaction of Cu₂O and Ln₂O₃, and AgLnO₂ (Ln=Tm, Yb, Lu) were obtained by the cation-exchange reaction of NaLnO₂ and AgNO₃ in a KNO₃ flux. These compounds crystallized in the delafossite-type structure with the rhombohedral 3R type (space group: R-3m). Magnetic susceptibility measurements showed that these compounds are paramagnetic down to 1.8 K. Specific heat measurements down to 0.4 K indicated that CuNdO₂ ordered antiferromagnetically at 0.8 K.     

Enantioselective Palladium(0)‐Catalyzed Nazarov‐Type Cyclization

A Pd⁰‐catalyzed asymmetric Nazarov‐type cyclization is described. The optimized ligand for the reaction incorporates a weakly coordinating pyridine ring into a TADDOL‐derived phosphoramidite (TADDOL=α,α,α,α‐tetraaryl‐1,3‐dioxolane‐4,5‐dimethanol). The reaction leads to the formation of cyclopentenones as single diastereoisomers that incorporate two contiguous asymmetric centers, one tertiary and one an all‐carbon‐atom quaternary stereocenter, in high yield and optical purity. It is noteworthy that the reaction does not require that substrates should be activated by aryl substituents.