Photo-initiated base-formation in a polymer matrix

It was found that amines were formed efficiently by the photolysis of O-acyloximes followed by hydrolysis in polystyrene films and the relationship between structures of O-acyloximes and yields of amines were investigated. O-phenylacetyl acetophenone oxime (PaApO), O-pivaloyl acetophenone oxime (PApO), and O-benzoyl acetophenone oxime (BApO) as monofunctional O-acyloximes and O,O′-succinyl diacetophenone oxime (SDApO) and O,O′-glutaryl diacetophenone oxime (GDApO) as bifunctional O-acyloximes were examined. The yields of amines for PaApO and SDApO under N₂ were ca. 70%, which was the highest among O-acyloximes examined in this experiment. On the other hand, the yields for PApO, BApO, and GDApO were less than 15% and it was verified that the hydrogen abstraction by imino radicals via 6-membered cyclic intermediates resulted in the lowering of yields. Although the effect of oxygen under photolysis on the yields of amine for PaApO was negligible under 50% conversion of PaApO, the yield decreased with further increase in the conversion and was 50% at 90% conversion. © 1994 John Wiley & Sons, Inc.     

Vinyl polymerization. CCCXXXIX. Effect of chain length of nylon 3 on the polymerization of methyl methacrylate initiated with the system of nylon 3, copper(II) ion,and water

It was found recently that the system of nylon 3, copper(II) ion, and water could initiate a radical polymerization of methyl methacrylate(MMA). In the present paper, the effect of average chain length of the molecules of nylon 3 on the rate of polymerization of MMA was studied. The rate increased with the chain length of nylon 3. This result was explained well by the fact that the shorter nylon 3 forms a complex with copper (II) ion more easily than longer nylon 3. It was assumed that the shorter nylon 3 fills three or four coordination sites of copper(II) ion and loses the ability to initiate the polymerization. The efficiency of grafting of MMA and the degree of polymerization of MMA homopolymer were independent of the chain length of nylon 3.     

Systematic enantiomeric separation of [60]fullerene bisadducts possessing an inherent chiral addition pattern

The optical resolution of trans-2 and trans-3 [60]fullerene bisadducts with an inherent chiral addition pattern, modified by Bingel reaction, cycloaddition by benzyne, Prato reaction, and cycloaddition by o-quinodimethane, was systematically investigated by using chiral HPLC columns (Chiralcel OD and Chiralpak AD). The chiroptical properties of enantiomers separated were also examined.     

Cyclopolycondensations

Fully aromatic polyquinazolinediones of high molecular weight were prepared by the cyclopolycondensation reaction of 4,4′-diamino-3,3′-biphenyldicarboxylic acid with aromatic diisocyanates. The poly(phosphoric acid) solution polymerization techniques yielded tractable poly(urea acid), which was converted to polyquinazolinediones by thermal cyclodehydration at 300–400°C. under reduced pressure. The polyquinazolinediones thus obtained have excellent thermal stability both in nitrogen and in air. The poly(urea acid) is soluble in dimethyl sulfoxide, and films can be cast from the polymer solution of poly(urea acid) (η_inh = 0.8 to 1.8). The films are made tough by being heated in nitrogen or under reduced pressure at 300–400°C. The polymerization mechanism of the cyclopolycondensation reaction was studied, and it was established that the polymerization proceeded through the formation of tractable poly(urea acid), Structure (I), of high molecular weight, followed by cyclodehydration, yielding poly(1,2-dihydro-2-imino-4H-3,1-benzoxazin-4-one), Structure (II). On subsequently being heated this undergoes intramolecular rearrangement along the polymer chain, giving the thermodynamically stable polyquinazolinedione, Structure (III).     

Phylogenetic analysis of picoplankton in Lake Biwa and application to legal medicine

Three strains of picoplankton designated as brown, green, and pink belonging to the Synechococcus genus in cyanobacteria (approximately 1 microm in size) are found ubiquitously in Lake Biwa, Japan. However, they could not be morphologically discriminated from other bacteria such as Proteobacteria and Bacillus by microscopy. In this study, we attempted to use the polymerase chain reaction (PCR) analysis of the 16S ribosomal DNA (rDNA) from picoplankton for the diagnosis of death by drowning. A segment of 16S rDNA was sequenced in order to investigate their phylogenetic relationships and to design the specific primers. The PCR products from three picoplanktons were compared with those from five other cyanobacteria, Melosira (diatom), Staurastrum (green alga), bacteria from Lake Baikal, and humans. The picogram order of template DNA from picoplankton was specifically amplified by the primers. When the template of picoplankton was mixed with human tissue, at least 10 ng of template DNA was needed to obtain a PCR product. The efficiency of PCR was increased more than hundredfold by isolating the picoplankton from human lung tissue. The specific PCR products of the picoplankton were obtained from a formalin-fixed drowning body (lung and liver) that was found in a downstream river and Lake Biwa. The PCR analysis of the picoplanktion 16S rDNA is considered useful for the diagnosis of death by drowning.     

Temperature-induced gelation of concentrated silicon carbide suspensions

Due to the steric barrier provided by the adsorption of the dispersant hypermer KD1 (a polyester/polyamine condensation polymer), stable and low-viscosity suspensions of SiC, Y(2)O(3), and Al(2)O(3) powder mixtures could be prepared in methyl ethyl ketone (MEK)/ethanol (E) solvent with solids loading as high as 60 vol%. The solvency of the dispersant in MEK/E decreased dramatically on cooling. Steady shear viscosity and oscillatory measurements were performed as a function of temperature for suspensions with different solids loading. The viscosity and elastic modulus of suspension increased with decreasing temperature and became more sensitive with the increase of solids loading. The suspensions with solids loading higher than 40 vol% could be solidified with decreasing temperature, but gelation temperature and gelation stiffness decreased with decreasing solids loading. The 60 vol% solid-loaded suspension was a stable and free-flowing fluid at 20 degrees C and gradually transformed to a very highly viscous and elastic system upon cooling to about 13 degrees C. Complete solidification occurred when the temperature was decreased to 5 degrees C. The gelation mechanism was mainly based on the collapse of the adsorbed layer as the temperature decreases, which induced incipient flocculation and formed a stiff network. The gelled body was further strengthened by separation of the dispersant from the suspension.     

Fully automated micro- and nanoscale one- or two-dimensional high-performance liquid chromatography system for liquid chromatography-mass spectrometry compatible with non-volatile salts for ion exchange chromatography

A one- or two-dimensional high performance liquid chromatography system for electrospray ionization mass spectrometers has been developed that is optimized for ion exchange and reversed phase separations. A unique and simple valve configuration permits the use of a variety of non-volatile salts; ammonium sulfate was used in an example of strong cation exchange separations. The system was designed and evaluated for both micro- and nanoflow chromatography. The peptide detection limit was approximately 100 fmol for micro- and 20 fmol for nanoflow, demonstrating the concentration and mass sensitivity improvements expected with nanoelectrospray ionization. The 1D/2D-HPLC MS system is fully automated for routine peptide analyses, compatible with direct injection of proteolytic digests, and exhibits chromatographic reproducibility and sensitivity. Software permits operator selection of either a 1D or 2D configuration with corresponding system parameters as required for individual samples. The hardware elements and resulting performance are described in this paper.     

Syntheses and electrical conductivity of polyamides containing tetrathiafulvalene moieties in the main chain

Novel polyamides that contain tetrathiafulvalene (TTF) moieties were synthesized by direct polycondensation of Δ^2,2′ -bi-1,3-dithiole-4,4′(5′)-dicarboxylic acid with aromatic diamines in the presence of triphenylphosphine, hexachloroethane, and pyridine. Complexes of these polyamides with bromine were TTF cation radical () salts which resulted from the charge transfer of TTF moieties to bromine. The electrical conductivity of undoped polyamides increased with a decrease in diamine length. By doping the bromine the conductivity of the polyamides was enhanced by 3–5 orders of magnitude and reached 10^?5–;10^?9S cm^?1. Maximum conductivity was observed at the doping ratio of [Br]/[repeat unit] < 1. The electrical conduction in the bromine complexes may be attributed to the hopping of odd electrons of between TTF moieties.     

Dependence of the Reactivities of Titanium Enolates on How They Are Generated: Diastereoselective Coupling of Phenylacetic Acid Esters Using Titanium Tetrachloride

Oxidative coupling of phenylacetic acid esters was easily achieved by treating the esters with TiCl(4) and then adding Et(3)N to the resulting solution. The products consisted of dl- and meso-2,3-diphenylsuccinic acid esters with the Claisen condensation product, and the ratio of these products depended on the reaction conditions. Reaction conditions suitable for high dl selectivity were determined, and a dimer of titanium enolate was postulated as an intermediate responsible for the high dl selectivity. The selectivities were compared with those in known oxidative couplings in which titanium enolate intermediates are prepared through lithium enolates and silyl enol ethers. The results suggest that the reactivities of titanium enolates intermediates depend on how they are generated.     

Complexometric titration of calcium in the presence of larger amounts of magnesium

A simple and accurate titrimetric determination of calcium in the presence of larger amounts of magnesium is proposed. Calcium is extracted into a small volume of organic solvent as its glyoxal-bis(2-hydroxyanil) complex, and the calcium is titrated with EGTA. The end-point is sharp, and occurs when the red colour of the organic layer vanishes. This method has been successfully applied to the determination of calcium in sea-water with an error less than 0.1%.