Ruthenium-catalyzed reaction of alpha,beta-unsaturated imines with carbon monoxide and alkenes leading to beta,gamma-unsaturated gamma-butyrolactams: involvement of direct carbonylation at olefinic C[bond]H Bonds as a key step

The reaction of alpha,beta-unsaturated imines with CO and alkenes in the presence of Ru(3)(CO)(12) as a catalyst results in a three-component coupling reaction that gives alpha,alpha-disubstituted beta,gamma-unsaturated gamma-butyrolactams. The reaction proceeds via a two-step sequence involving the initial formation of ketone derivatives by catalytic carbonylation at the beta-olefinic C-H bonds of alpha,beta-unsaturated imines, followed by the (uncatalyzed) intramolecular nucleophilic attack of the imine nitrogen on the ketonic carbon to generate a tetrahedral intermediate, which then undergoes a 1,2-ethyl migration. The reaction of a cyclic unsaturated imine, derived from the reaction of (1R)-(-)-myrtenal with tert-butylamine, gives a beta-aminocyclopentene derivative, which is formed by an aldol-type condensation of the initially formed ketone, indicating the initial formation of ethyl ketone.     

The effect of humidity on thermal process of zinc acetate

The thermal decomposition of zinc acetate dihydrate Zn(CH₃CO₂)₂·2H₂O in some humidity-controlled atmospheres has been successfully investigated by novel thermal analyses, which are sample-controlled thermogravimetry (SCTG), thermogravimety combined with evolved gas analysis using mass spectrometry (TG–MS) and simultaneous measurement of differential scanning calorimetry and X-ray diffractometry (XRD–DSC). The thermal processes of anhydrous zinc acetate in dry gas atmosphere by conventional linear heating experiment initiated with the sublimation around 180 °C, followed by the fusion and the decomposition over 250 °C. SCTG was useful to interpret clearly the successive reaction because the high-temperature parallel decompositions were effectively inhibited. The thermal behavior changed dramatically by introducing water vapor in the atmosphere and the thermal process was quite different from that in dry gas atmosphere. Zinc oxide (ZnO) was formed only in a humidity-controlled atmosphere, and could be easily synthesized at temperatures below 300 °C. XRD–DSC equipped with a humidity generator revealed directly the crystalline change from Zn(CH₃CO₂)₂ to ZnO. A detailed thermal process of Zn(CH₃CO₂)₂·2H₂O and the effect of water vapor are discussed.     

Thermal change of Alq3, tris(8-hydroxyquinolinato) aluminum(III) studied by TG and XRD-DSC

The thermal change of the tris(8-hydroxyquinolinato)aluminum (Alq₃) is currently investigated by XRD-DSC and TG. The phase transition of Alq₃ from α-phase to γ-phase takes place at 643–669 K. A very sharp peak with the peak temperature at approx. 709 K is ascribed to the melting of the Alq₃. The decomposition of the Alq₃ was observed accompanied with the melting and evaporation at >703K. The effect of the atmospheres on the mass loss procedure was studied by TG. It was found that thermal process of Alq₃ was strongly influenced by the partial pressure of water vapor in the atmosphere instead of oxygen.     

Effect of enzyme concentration on the dynamic behavior of a membrane-bound enzyme system

The dynamic behavior of the reaction-diffusion system, composed of glucose oxidase (EC 1.1.3.4) immobilized at a uniform concentration in a membrane, used as a glucose electrode is represented by a diffusion equation with a nonlinear reaction-term in one-dimensional space. The mathematical model is analyzed by computer simulation, that is, numerical integration of the equation under various initial and boundary conditions, to examine the effect of enzyme concentration on the response characteristics (responsiveness and linearity in response) of the electrode. The analysis of the responses of the system to stepwise changes in the boundary value (glucose concentration in simple solution) infers that the enzyme concentration governs the patterns of the spatial distributions of the substrates (glucose and dissolved oxygen) in steady states and transient responses. It is also revealed that the response characteristics of the electrode are optimized with concentration of immobilized enzyme and that the system establishes the steady states at the same spatial distributions of the substrates, regardless of the boundary value. The diffusion of the substrates and the oxygen concentration also have significant effects on the response characteristics of the electrode.     

Synthesis, characterization and FET properties of novel dithiazolylbenzothiadiazole derivatives

Dithiazolylbenzothiadiazoles easily obtained have high electron affinity and the FET device of a trifluoromethylphenyl derivative exhibited a good n-type performance with high electron mobility.     

2,6-Diphenylbenzo[1,2-b:4,5-b']dichalcogenophenes: a new class of high-performance semiconductors for organic field-effect transistors

2,6-Diphenylbenzo[1,2-b:4,5-b']dichalcogenophenes including thiophene, selenophene, and tellurophene analogues as organic semiconductors for field-effect transistors were effectively synthesized in three steps from commercially available 1,4-dibromobenzene. All three benzodichalcogenophenes acted as good p-type semiconductors, and particularly the selenophene analogue, 2,6-diphenylbenzo[1,2-b:4,5-b']diselenophene, showed high FET mobility of 0.17 cm2 V-1 s-1.     

A ruthenium-catalyzed reaction of aromatic ketones with arylboronates: a new method for the arylation of aromatic compounds via C-H bond cleavage

The ruthenium-catalyzed reaction of aromatic ketones with arylboronic acid esters (arylboronates) gave the ortho arylation product. For this coupling reaction, a RuH2(CO)(PPh3)3 complex exhibited the highest catalytic activity among the complexes screened. Several aromatic ketones, for example, acetophenones, acetonaphthone, alpha-tetralone, and benzosuberone, can be used in this coupling reaction. A variety of arylboronates containing electron-donating (OMe and NMe2) and -withdrawing (F and CF3) groups were found to react with aromatic ketones to give the corresponding aylation products. The corresponding arylboronic acids could be used in this coupling reaction, but the yields were slightly lower, as compared to those of the reaction using the corresponding arylboronates.     

Donor–acceptor–acceptor-type near-infrared fluorophores that contain dithienophosphole oxide and boryl groups: effect of the boryl group on the nonradiative decay

The use of donor–π–acceptor (D–π–A) skeletons is an effective strategy for the design of fluorophores with red-shifted emission. In particular, the use of amino and boryl moieties as the electron-donating and -accepting groups, respectively, can produce dyes that exhibit high fluorescence and solvatochromism. Herein, we introduce a dithienophosphole P-oxide scaffold as an acceptor–spacer to produce a boryl- and amino-substituted donor–acceptor–acceptor (D–A–A) π-system. The thus obtained fluorophores exhibit emission in the near-infrared (NIR) region, while maintaining high fluorescence quantum yields even in polar solvents (e.g. λ_em = 704 nm and Φ_F = 0.69 in CH₃CN). A comparison of these compounds with their formyl- or cyano-substituted counterparts demonstrated the importance of the boryl group for generating intense emission. The differences among these electron-accepting substituents were examined in detail using theoretical calculations, which revealed the crucial role of the boryl group in lowering the nonradiative decay rate constant by decreasing the non-adiabatic coupling in the internal conversion process. The D–A–A framework was further fine-tuned to improve the photostability. One of these D–A–A dyes was successfully used in bioimaging to visualize the blood vessels of Japanese medaka larvae and mouse brain.

Combination of electron-accepting diarylboryl terminal groups and dithienophosphole oxide spacers with electron-donating triarylamine moieties produces donor–acceptor–acceptor type π-systems, which exhibit emissions in the near-infrared region.     

Medicinal foodstuffs. XVII. Fenugreek seed. (3): structures of new furostanol-type steroid saponins, trigoneosides Xa, Xb, XIb, XIIa, XIIb, and XIIIa, from the seeds of Egyptian Trigonellafoenum-graecum L

Six new furostanol-type steroid saponins called trigoneosides Xa, Xb, XIb, XIIa, XIIb, and XIIIa were isolated from the seeds of Egyptian Trigonella foenum-graecum L. (Leguminosae) together with six known furostanol-type steroid saponins: trigoneosides Ia, Ib, and Va, glycoside D, trigonelloside C, and compound C. The structures of trigoneosides Xa, Xb, Xlb, XIIa, Xllb, and XIIIa were determined on the basis of chemical and physicochemical evidence as 26-O-beta-D-glucopyranosyl-(25S)-5alpha-furostane-2alpha+ ++,3beta,22xi,26-tetraol 3-O-alpha-L-rhamnopyranosyl(1-->2)-,beta-D-glucopyranoside, 26-O-beta-D-glucopyranosyl-(25R)-5alpha-furostane-2 alpha,beta,22xi,26tetraol 3-O-alpha-L-rhamnopyranosyl(l -->2)-beta-D-glucopyranoside, 26-O-beta-D-glucopyranosyl-(25R)-5alpha-furostane2alpha++ +,beta,22xi,26-tetraol 3-O-beta-D-xylopyranosyl(l -->4)-beta-D-glucopyranoside, 26-O-beta-D-glucopyranosyl-(25S)-furost-4-ene-3beta,22xi,26- triol 3-O-Ca-L-rhamnopyranosyl(1-->2)-beta-D-glucopyranoside, 26-O-beta-D-glucopyranosyl-(25R)-furost-4-ene-3beta,22xi+ ++,26-triol 3-O-alpha-L-rhamnopyranosyl(1-->2)-beta-D-glucopyranoside, and 26-O-beta-D-glucopyranosyl(25S)-furost-5-ene-3beta,22xi,26-t riol 3-O-alpha-L-rhamnopyranosyl(1-->2)-beta-D-glucopyranosyl (1-->3)-beta-D-glucopyranosyl(1--4)]-beta-D-glucopyranoside, respectively.     

Ethylene and propylene polymerization behavior of a series of bis(phenoxy–imine)titanium complexes

This contribution reports ethylene and propylene polymerization behavior of a series of Ti complexes bearing a pair of phenoxy–imine chelate ligands. The bis(phenoxy–imine)Ti complexes in conjunction with methylalumoxane (MAO) can be active catalysts for the polymerization of ethylene. Unexpectedly, this C₂ symmetric catalyst produces syndiotactic polypropylene. ¹³C NMR spectroscopy has revealed that the syndiotacticity arises from a chain-end control mechanism. Substitutions on the phenoxy–imine ligands have substantial effects on both ethylene and propylene polymerization behavior of the complexes. In particular, the steric bulk of the substituent ortho to the phenoxy–oxygen is fundamental to obtaining high activity and high molecular weight for ethylene polymerization and high syndioselectivity for the chain-end controlled propylene polymerization. The highest ethylene polymerization activity, 3240 kg/mol-cat h, exhibited by a complex having a t-butyl group ortho to the phenoxy–oxygen, represents one of the highest reported to date for Ti-based non-metallocene catalysts. Additionally, the polypropylene produced exhibits a T_m, 140 °C, and syndioselectivity, rrrr 83.7% (achieved by a complex bearing a trimethylsilyl group ortho to the phenoxy–oxygen) that are among the highest for polypropylenes produced via a chain-end control mechanism. Hence, the bis(phenoxy–imine)Ti complexes are rare examples of non-metallocene catalysts that are useful for the polymerization of not only ethylene but also propylene.