Redox-controlled, reversible rearrangement of a tris(2-pyridylthio)methyl ligand on nickel to an isomer with an “N,S-confused” 2-pyridylthiolate arm

Interchange between the nickel +2 and +3 oxidation states precisely controls the reversible rearrangement of the tris(2-pyridylthio)methanide (tptm) ligand in the organometallic nickel(II) complex [{Ni(μ-Br)-(tptm)}(2)] (2). Oxidation of 2 first gives the corresponding Ni(III) complex [{Ni(μ-Br)(tptm)}(2)][PF(6)](2) (4). However, in solution the tptm ligand in 4 slowly undergoes a rearrangement, in which the N and S atoms of one of the pyridylthiolate arms exchange Ni and C bonding partners, thereby resulting in an "N,S-confused" isomer of tptm in the product, [NiBr(bpttpm)]PF(6) (5; bpttpm= bis(2-pyridylthio)(2-thiopyridinium)-methyl). Reduction of 5 reverses this ligand rearrangement and 2 is reformed quantitatively. The individual steps involved in these unusual ligand rearrangements were investigated by a number of methods, including voltammetric analysis, and a mechanism for this process is proposed. X-ray crystal structure determinations of the key compounds 2, 4 and 5 have been obtained.     

Microchip electrophoretic protein separation using electroosmotic flow induced by dynamic sodium dodecyl sulfate-coating of uncoated plastic chips

Separation of sodium dodecyl sulfate (SDS)-protein complexes is difficult on plastic microchips due to protein adsorption onto the wall. In this paper, we elucidated the reasons for the difficulties in separating SDS-protein complexes on plastic microchips, and we then demonstrated an effective method for separating proteins using polymethyl methacrylate (PMMA) microchips. Separation difficulties were found to be dependent on adsorption of SDS onto the hydrophobic surface of the channel, by which cathodic electroosmotic flow (EOF; reversed flow) was generated. Our developed method effectively utilized the reversed flow from this cathodic EOF as a driving force for sample proteins using permanently uncoated but dynamic SDS-coated PMMA microchips. High-speed (6 s) separation of proteins and peptides up to 116 kDa was successfully achieved using this system.     

Ethylene and propylene polymerization behavior of a series of bis(phenoxy–imine)titanium complexes

This contribution reports ethylene and propylene polymerization behavior of a series of Ti complexes bearing a pair of phenoxy–imine chelate ligands. The bis(phenoxy–imine)Ti complexes in conjunction with methylalumoxane (MAO) can be active catalysts for the polymerization of ethylene. Unexpectedly, this C₂ symmetric catalyst produces syndiotactic polypropylene. ¹³C NMR spectroscopy has revealed that the syndiotacticity arises from a chain-end control mechanism. Substitutions on the phenoxy–imine ligands have substantial effects on both ethylene and propylene polymerization behavior of the complexes. In particular, the steric bulk of the substituent ortho to the phenoxy–oxygen is fundamental to obtaining high activity and high molecular weight for ethylene polymerization and high syndioselectivity for the chain-end controlled propylene polymerization. The highest ethylene polymerization activity, 3240 kg/mol-cat h, exhibited by a complex having a t-butyl group ortho to the phenoxy–oxygen, represents one of the highest reported to date for Ti-based non-metallocene catalysts. Additionally, the polypropylene produced exhibits a T_m, 140 °C, and syndioselectivity, rrrr 83.7% (achieved by a complex bearing a trimethylsilyl group ortho to the phenoxy–oxygen) that are among the highest for polypropylenes produced via a chain-end control mechanism. Hence, the bis(phenoxy–imine)Ti complexes are rare examples of non-metallocene catalysts that are useful for the polymerization of not only ethylene but also propylene.     

Rhodium-catalyzed allyl transfer from homoallyl alcohols to aldehydes via retro-allylation followed by isomerization into ketones

Retro-allylation of homoallyl alcohol by rhodium catalysis occurs to generate allylrhodium species. This allylrhodium reacts with aldehydes to give the corresponding secondary alcohols in situ. Isomerization of these alcohols proceeds in the same pots to furnish the corresponding saturated ketones in good yields. [reaction: see text]     

Preparation of Gd(2)O(3) : Eu(3+) and Gd(2)O(2)S : Eu(3+) phosphor fine particles using an emulsion liquid membrane system

Size- (submicrometer-sized) and morphology- (spherical) controlled composite Gd-Eu oxalate particles were prepared in an emulsion liquid membrane (water-in-oil-in-water emulsion) system. The oxalate particles thus prepared were calcined in air to obtain Gd(2)O(3) : Eu(3+) phosphor particles and in sulfur atmosphere to obtain Gd(2)O(2)S : Eu(3+) phosphor particles. These submicrometer-sized spherical phosphor particles showed photoluminescence properties with emission peak at 614 nm for Gd(2)O(3) : Eu(3+) and 628 nm for Gd(2)O(2)S : Eu(3+).     

Investigation into pH-responsive self-assembled monolayers of acylated anthranilate-terminated alkanethiol on a gold surface

This article describes the preparation of pH-responsive self-assembled monolayers (SAMs) of acylated anthranilate-terminated alkanethiol. These monolayers are formed by chemisorption of the alkanethiol molecules onto a gold surface, resulting in different wetting properties of the surfaces depending upon the pH. By using various characterization techniques (e.g., infrared spectroscopy, cyclic voltammetry, contact angle measurements, and surface energy analysis), we have found that the changes in the wetting properties originate from the different surface structures of the monolayers in different pH environments. From surface energy analysis, we found that the disperse components of the surface energy on such SAMs predominate after treatment with pH 1 water, whereas the polar components of the surface energy on such SAMs predominate after treatment with pH 13 water. It is greatly anticipated that this line of research will provide new insight into the mechanism behind pH-responsive properties, facilitating the design and synthesis of new surface-active molecules for the fabrication of pH-responsive functional surfaces.     

Spectroscopic Properties of Amine‐substituted Analogues of Firefly Luciferin and Oxyluciferin

Spectroscopic and photophysical properties of firefly luciferin and oxyluciferin analogues with an amine substituent (NH₂, NHMe and NMe₂) at the C6' position were studied based on absorption and fluorescence measurements. Their π‐electronic properties were investigated by DFT and TD‐DFT calculations. These compounds showed fluorescence solvatochromism with good quantum yields. An increase in the electron‐donating strength of the substituent led to the bathochromic shift of the fluorescence maximum. The fluorescence maxima of the luciferin analogues and the corresponding oxyluciferin analogues in a solvent were well correlated with each other. Based on the obtained data, the polarity of a luciferase active site was explained. As a result, the maximum wavelength of bioluminescence for a luciferin analogue was readily predicted by measuring the photoluminescence of the luciferin analogue in place of that of the corresponding oxyluciferin analogue.     

Copper‐Catalyzed Borylative Allyl–Allyl Coupling Reaction

Borylative allyl–allyl coupling using allenes, bis(pinacolato)diboron, and allyl phosphates has been developed in the presence of a copper catalyst bearing an N‐heterocyclic carbene ligand. The reaction affords boryl‐substituted 1,5‐diene derivatives in good to high yields with high regioselectivity and Z selectivity.     

Fabrication and optical reflection behavior of a two-dimensional barium titanate ceramic photonic crystal

We demonstrate a method for fabricating a two-dimensional hexagonal array of nanoscale barium titanate ceramic pillars. A precursor array was prepared by introducing a sol solution into an electron-beam resist mold with air holes and subsequently dry etching the unnecessary gel layer formed on the mold. A ceramic array, consisting of barium titanate ceramic pillars with a radius of 85 nm, a lattice constant of 450 nm, and a height of 500 nm, was fabricated by sintering the precursor array at 1073 K. The reflection spectra for the ceramic array in the visible range revealed the underlying photonic band gaps, which were in good agreement with results calculated using a plane-wave method. PACS 77.84.-s; 42.70.-a; 42.70.Qs