A ruthenium-catalyzed reaction of aromatic ketones with arylboronates: a new method for the arylation of aromatic compounds via C-H bond cleavage

The ruthenium-catalyzed reaction of aromatic ketones with arylboronic acid esters (arylboronates) gave the ortho arylation product. For this coupling reaction, a RuH2(CO)(PPh3)3 complex exhibited the highest catalytic activity among the complexes screened. Several aromatic ketones, for example, acetophenones, acetonaphthone, alpha-tetralone, and benzosuberone, can be used in this coupling reaction. A variety of arylboronates containing electron-donating (OMe and NMe2) and -withdrawing (F and CF3) groups were found to react with aromatic ketones to give the corresponding aylation products. The corresponding arylboronic acids could be used in this coupling reaction, but the yields were slightly lower, as compared to those of the reaction using the corresponding arylboronates.     

Donor–acceptor–acceptor-type near-infrared fluorophores that contain dithienophosphole oxide and boryl groups: effect of the boryl group on the nonradiative decay

The use of donor–π–acceptor (D–π–A) skeletons is an effective strategy for the design of fluorophores with red-shifted emission. In particular, the use of amino and boryl moieties as the electron-donating and -accepting groups, respectively, can produce dyes that exhibit high fluorescence and solvatochromism. Herein, we introduce a dithienophosphole P-oxide scaffold as an acceptor–spacer to produce a boryl- and amino-substituted donor–acceptor–acceptor (D–A–A) π-system. The thus obtained fluorophores exhibit emission in the near-infrared (NIR) region, while maintaining high fluorescence quantum yields even in polar solvents (e.g. λ_em = 704 nm and Φ_F = 0.69 in CH₃CN). A comparison of these compounds with their formyl- or cyano-substituted counterparts demonstrated the importance of the boryl group for generating intense emission. The differences among these electron-accepting substituents were examined in detail using theoretical calculations, which revealed the crucial role of the boryl group in lowering the nonradiative decay rate constant by decreasing the non-adiabatic coupling in the internal conversion process. The D–A–A framework was further fine-tuned to improve the photostability. One of these D–A–A dyes was successfully used in bioimaging to visualize the blood vessels of Japanese medaka larvae and mouse brain.

Combination of electron-accepting diarylboryl terminal groups and dithienophosphole oxide spacers with electron-donating triarylamine moieties produces donor–acceptor–acceptor type π-systems, which exhibit emissions in the near-infrared region.     

Ethylene and propylene polymerization behavior of a series of bis(phenoxy–imine)titanium complexes

This contribution reports ethylene and propylene polymerization behavior of a series of Ti complexes bearing a pair of phenoxy–imine chelate ligands. The bis(phenoxy–imine)Ti complexes in conjunction with methylalumoxane (MAO) can be active catalysts for the polymerization of ethylene. Unexpectedly, this C₂ symmetric catalyst produces syndiotactic polypropylene. ¹³C NMR spectroscopy has revealed that the syndiotacticity arises from a chain-end control mechanism. Substitutions on the phenoxy–imine ligands have substantial effects on both ethylene and propylene polymerization behavior of the complexes. In particular, the steric bulk of the substituent ortho to the phenoxy–oxygen is fundamental to obtaining high activity and high molecular weight for ethylene polymerization and high syndioselectivity for the chain-end controlled propylene polymerization. The highest ethylene polymerization activity, 3240 kg/mol-cat h, exhibited by a complex having a t-butyl group ortho to the phenoxy–oxygen, represents one of the highest reported to date for Ti-based non-metallocene catalysts. Additionally, the polypropylene produced exhibits a T_m, 140 °C, and syndioselectivity, rrrr 83.7% (achieved by a complex bearing a trimethylsilyl group ortho to the phenoxy–oxygen) that are among the highest for polypropylenes produced via a chain-end control mechanism. Hence, the bis(phenoxy–imine)Ti complexes are rare examples of non-metallocene catalysts that are useful for the polymerization of not only ethylene but also propylene.     

The molecular structure and chemical reactivities of the condensation products of o-substituted benzylidenacetylacetone with hydrazine dihydrochloride

Reaction of o-nitrobenzylideneacetylacetone ( 1a ) with hydrazine dihydrochloride in methanol gave 4-(α-methoxy-o-nitrobenzyl)-3,5-dimethylpyrazole hydrochloride ( 4a ), whose structure was unambigously confirmed by an X-ray crystallographic analysis, via 4-(o-nitrobenzylidene)-3,5-dimethylisopyrazole ( 2a ). Compound 2a was synthesized by condensation of 1a with hydrazine dihydrochloride in acetonitrile. Analogously the corresponding o-chloro derivatives ( 2b, 4b ) were obtained. These were converted to N-methyl ( 6b ) and N-acetyl ( 7a,b ) derivatives and the behaviors on bromination and pyrolysis were investigated.     

m-Diethynylbenzene macrocycles: syntheses and self-association behavior in solution

m-Diethynylbenzene macrocycles (DBMs), buta-1,3-diyne-bridged [4(n)]metacyclophanes, have been synthesized and their self-association behaviors in solution were investigated. Cyclic tetramers, hexamers, and octamers of DBMs having exo-annular octyl, hexadecyl, and 3,6,9-trioxadecyl ester groups were prepared by intermolecular oxidative coupling of dimer units or intramolecular cyclization of the corresponding open-chain oligomers. The aggregation properties were investigated by two methods, the (1)H NMR spectra and the vapor pressure osmometry (VPO). Although some discrepancies were observed between the association constants obtained from the two methods, the qualitative view was consistent with each other. The analysis of self-aggregation by VPO revealed unique aggregation behavior of DBMs in acetone and toluene, which was not elucidated by the NMR method. Namely, the association constants for infinite association are several times larger than the dimerization constant, suggesting that the aggregation is enhanced by the formation of dimers (a nucleation mechanism). In polar solvents, DBMs aggregate more strongly than in chloroform due to the solvophobic interactions between the macrocyclic framework and the solvents. Moreover, DBMs self-associate in aromatic solvents such as toluene and o-xylene more readily than in chloroform. In particular, the hexameric DBM having a large macrocyclic cavity exhibits extremely large association constants in aromatic solvents. By comparing the aggregation properties of DBMs with the corresponding acyclic oligomers, the effect of the macrocyclic structure on the aggregation propensity was clarified. Finally, it turned out that DBMs tend to aggregate more readily than the corresponding phenylacetylene macrocycles, acetylene-bridged [2(n)]metacyclophanes, owing to the withdrawal of the electron density from the aromatic rings by the butadiyne linkages which facilitates pi-pi stacking interactions.     

Microchip electrophoretic protein separation using electroosmotic flow induced by dynamic sodium dodecyl sulfate-coating of uncoated plastic chips

Separation of sodium dodecyl sulfate (SDS)-protein complexes is difficult on plastic microchips due to protein adsorption onto the wall. In this paper, we elucidated the reasons for the difficulties in separating SDS-protein complexes on plastic microchips, and we then demonstrated an effective method for separating proteins using polymethyl methacrylate (PMMA) microchips. Separation difficulties were found to be dependent on adsorption of SDS onto the hydrophobic surface of the channel, by which cathodic electroosmotic flow (EOF; reversed flow) was generated. Our developed method effectively utilized the reversed flow from this cathodic EOF as a driving force for sample proteins using permanently uncoated but dynamic SDS-coated PMMA microchips. High-speed (6 s) separation of proteins and peptides up to 116 kDa was successfully achieved using this system.     

Imaging of enzyme activity by scanning electrochemical microscope equipped with a feedback control for substrate-probe distance

The enzymatic activity of diaphorase (Dp) immobilized on a solid substrate was characterized using a scanning electrochemical microscope (SECM) with shear force feedback to control the substrate-probe distance. The shear force between the substrate and the probe was monitored with a tuning fork-type quartz crystal and used as the feedback control to set the microelectrode probe close to the substrate surface. The sensitivity and the contrast of the SECM image were improved in the constant distance mode (distance, 50 nm) with the shear force feedback compared to the image in the constant height mode without the feedback. By using this system, the SECM and topographic images of the immobilized diaphorase were simultaneously measured. The microelectrode tip used in this study was ground aslant like a syringe needle in order to obtain the shaper topographic images. This shape was also effective for avoiding the interference during the diffusion of the enzyme substrates.     

Preparation of Gd(2)O(3) : Eu(3+) and Gd(2)O(2)S : Eu(3+) phosphor fine particles using an emulsion liquid membrane system

Size- (submicrometer-sized) and morphology- (spherical) controlled composite Gd-Eu oxalate particles were prepared in an emulsion liquid membrane (water-in-oil-in-water emulsion) system. The oxalate particles thus prepared were calcined in air to obtain Gd(2)O(3) : Eu(3+) phosphor particles and in sulfur atmosphere to obtain Gd(2)O(2)S : Eu(3+) phosphor particles. These submicrometer-sized spherical phosphor particles showed photoluminescence properties with emission peak at 614 nm for Gd(2)O(3) : Eu(3+) and 628 nm for Gd(2)O(2)S : Eu(3+).     

Cooperative motions of protein and hydration water molecules: molecular dynamics study of scytalone dehydratase

Two molecular dynamics (MD) simulations totaling 25 ns of simulation time of monomeric scytalone dehydratase (SD) were performed. The enzyme has a ligand-binding pocket containing a cone-shaped alpha+beta barrel, and the C-terminal region covers the binding pocket. Our simulations clarified the difference in protein dynamics and conformation between the liganded protein and the unliganded protein. The liganded protein held the ligand molecule tightly and the initial structure was maintained during the simulation. The unliganded protein, on the other hand, fluctuated dynamically and its structure changed largely from the initial structure. In the equilibrium state, the binding pocket was fully solvated by opening of the C-terminal region, and the protein dynamics was connected with hydration water molecules entry into and release from the binding pocket. In addition, the cooperative motions of the unliganded protein and the hydration water molecules produced the path through the protein interior for ligand binding.