C3 cyclopolymerization. I. Is the cyclopolymerization of 1,3-bis(p-vinylphenyl)-propane by means of radical or anionic initiators possible?

Polymerization of 1,3-bis(p-vinylphenyl) propane (St-C₃-St) was investigated by using radical and anionic initiators. Radical polymerization yielded linear polymer with pendant styryl groups in pertinent conditions without gelation. Anionic polymerization with n-butyllithium and sodium naphthalene produced insoluble polymers that, according to infrared (IR) spectroscopy, had no cyclized units. On the other hand, phenylmagnesium bromide gave soluble polymer in HMPA-benzene mixed solvent. Zero-valent nickel catalyst also gave soluble polymer. The soluble polymers could be analyzed by several spectroscopies, and it was confirmed that those obtained by anionic and coordination polymerization had no [3.3]paracyclophane units in the main chain. From these results it was concluded that cationic propagation could be assumed if the polymer Of St-C₃-St contained [3.3]paracyclophane units in the main chain.     

Combinatorial synthesis of MUC1 glycopeptides: polymer blotting facilitates chemical and enzymatic synthesis of highly complicated mucin glycopeptides

The chemoselective polymer blotting method allows for rapid and efficient synthesis of glycopeptides based on a "catch and release" strategy between solid-phase and water-soluble polymer supports. We have developed a heterobifunctional linker sensitive to glutamic acid specific protease (BLase). The general procedure consists of five steps, namely (i) the solid-phase synthesis of glycopeptide containing BLase sensitive linker, (ii) subsequent deprotections and the release of the glycopeptide from the resin, (iii) chemoselective blotting of the glycopeptide intermediates in the presence of water-soluble polymers with oxylamino functional groups, (iv) sugar elongations using glycosyltransferases, and (v) the release of target glycopeptides from the polymer platform by selective BLase promoted hydrolysis. The combined use of the solid-phase chemical syntheses of peptides and the enzymatic syntheses of carbohydrates on water-soluble polymers would greatly contribute to the production of complicated glycopeptide libraries, thereby enhancing applicative research. We report here a high-throughput synthetic system for the various types of MUC1 glycopeptides exhibiting a variety of sugar moieties. It is our belief that this concept will become part of the entrenched repertoire for the synthesis of biologically important glycopeptides on the basis of glycosyltransferase reactions in automated and combinatorial syntheses.     

Effects of quaternary ammonium bases on valence-saturated but coordination-unsaturated chelates: Part IV. Extraction of some divalent metal 8-hydroxyquinolinates

The effect of zephiramine on the chelate formation and extraction of some divalent metals with oxine is reported. In the presence of zephiramine, the non-extractable 1:2 zinc— and cadmium—oxine chelates as well as the extractable 1:2 nickel— and manganese—oxine chelates become highly coordinated ternary complexes, M(Q)₃ (zeph), which are easily extracted into 1,2-dichloroethane. Copper is easily extracted into 1,2-dichloroethane as Cu(Q)₂, which is not affected by zephiramine.     

Photo-initiated base-formation in a polymer matrix

It was found that amines were formed efficiently by the photolysis of O-acyloximes followed by hydrolysis in polystyrene films and the relationship between structures of O-acyloximes and yields of amines were investigated. O-phenylacetyl acetophenone oxime (PaApO), O-pivaloyl acetophenone oxime (PApO), and O-benzoyl acetophenone oxime (BApO) as monofunctional O-acyloximes and O,O′-succinyl diacetophenone oxime (SDApO) and O,O′-glutaryl diacetophenone oxime (GDApO) as bifunctional O-acyloximes were examined. The yields of amines for PaApO and SDApO under N₂ were ca. 70%, which was the highest among O-acyloximes examined in this experiment. On the other hand, the yields for PApO, BApO, and GDApO were less than 15% and it was verified that the hydrogen abstraction by imino radicals via 6-membered cyclic intermediates resulted in the lowering of yields. Although the effect of oxygen under photolysis on the yields of amine for PaApO was negligible under 50% conversion of PaApO, the yield decreased with further increase in the conversion and was 50% at 90% conversion. © 1994 John Wiley & Sons, Inc.     

Vinyl polymerization. CCCXXXIX. Effect of chain length of nylon 3 on the polymerization of methyl methacrylate initiated with the system of nylon 3, copper(II) ion,and water

It was found recently that the system of nylon 3, copper(II) ion, and water could initiate a radical polymerization of methyl methacrylate(MMA). In the present paper, the effect of average chain length of the molecules of nylon 3 on the rate of polymerization of MMA was studied. The rate increased with the chain length of nylon 3. This result was explained well by the fact that the shorter nylon 3 forms a complex with copper (II) ion more easily than longer nylon 3. It was assumed that the shorter nylon 3 fills three or four coordination sites of copper(II) ion and loses the ability to initiate the polymerization. The efficiency of grafting of MMA and the degree of polymerization of MMA homopolymer were independent of the chain length of nylon 3.     

Systematic enantiomeric separation of [60]fullerene bisadducts possessing an inherent chiral addition pattern

The optical resolution of trans-2 and trans-3 [60]fullerene bisadducts with an inherent chiral addition pattern, modified by Bingel reaction, cycloaddition by benzyne, Prato reaction, and cycloaddition by o-quinodimethane, was systematically investigated by using chiral HPLC columns (Chiralcel OD and Chiralpak AD). The chiroptical properties of enantiomers separated were also examined.     

Phylogenetic analysis of picoplankton in Lake Biwa and application to legal medicine

Three strains of picoplankton designated as brown, green, and pink belonging to the Synechococcus genus in cyanobacteria (approximately 1 microm in size) are found ubiquitously in Lake Biwa, Japan. However, they could not be morphologically discriminated from other bacteria such as Proteobacteria and Bacillus by microscopy. In this study, we attempted to use the polymerase chain reaction (PCR) analysis of the 16S ribosomal DNA (rDNA) from picoplankton for the diagnosis of death by drowning. A segment of 16S rDNA was sequenced in order to investigate their phylogenetic relationships and to design the specific primers. The PCR products from three picoplanktons were compared with those from five other cyanobacteria, Melosira (diatom), Staurastrum (green alga), bacteria from Lake Baikal, and humans. The picogram order of template DNA from picoplankton was specifically amplified by the primers. When the template of picoplankton was mixed with human tissue, at least 10 ng of template DNA was needed to obtain a PCR product. The efficiency of PCR was increased more than hundredfold by isolating the picoplankton from human lung tissue. The specific PCR products of the picoplankton were obtained from a formalin-fixed drowning body (lung and liver) that was found in a downstream river and Lake Biwa. The PCR analysis of the picoplanktion 16S rDNA is considered useful for the diagnosis of death by drowning.     

Temperature-induced gelation of concentrated silicon carbide suspensions

Due to the steric barrier provided by the adsorption of the dispersant hypermer KD1 (a polyester/polyamine condensation polymer), stable and low-viscosity suspensions of SiC, Y(2)O(3), and Al(2)O(3) powder mixtures could be prepared in methyl ethyl ketone (MEK)/ethanol (E) solvent with solids loading as high as 60 vol%. The solvency of the dispersant in MEK/E decreased dramatically on cooling. Steady shear viscosity and oscillatory measurements were performed as a function of temperature for suspensions with different solids loading. The viscosity and elastic modulus of suspension increased with decreasing temperature and became more sensitive with the increase of solids loading. The suspensions with solids loading higher than 40 vol% could be solidified with decreasing temperature, but gelation temperature and gelation stiffness decreased with decreasing solids loading. The 60 vol% solid-loaded suspension was a stable and free-flowing fluid at 20 degrees C and gradually transformed to a very highly viscous and elastic system upon cooling to about 13 degrees C. Complete solidification occurred when the temperature was decreased to 5 degrees C. The gelation mechanism was mainly based on the collapse of the adsorbed layer as the temperature decreases, which induced incipient flocculation and formed a stiff network. The gelled body was further strengthened by separation of the dispersant from the suspension.     

Fully automated micro- and nanoscale one- or two-dimensional high-performance liquid chromatography system for liquid chromatography-mass spectrometry compatible with non-volatile salts for ion exchange chromatography

A one- or two-dimensional high performance liquid chromatography system for electrospray ionization mass spectrometers has been developed that is optimized for ion exchange and reversed phase separations. A unique and simple valve configuration permits the use of a variety of non-volatile salts; ammonium sulfate was used in an example of strong cation exchange separations. The system was designed and evaluated for both micro- and nanoflow chromatography. The peptide detection limit was approximately 100 fmol for micro- and 20 fmol for nanoflow, demonstrating the concentration and mass sensitivity improvements expected with nanoelectrospray ionization. The 1D/2D-HPLC MS system is fully automated for routine peptide analyses, compatible with direct injection of proteolytic digests, and exhibits chromatographic reproducibility and sensitivity. Software permits operator selection of either a 1D or 2D configuration with corresponding system parameters as required for individual samples. The hardware elements and resulting performance are described in this paper.