The characteristic fragment ions and visualization of cationic starches on pulp fiber using ToF‐SIMS

Time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) was used to investigate the distribution of cationic starch on pulp fiber. To identify the characteristic fragment ions of the cationic starches, deuterium‐labeled cationic starches were prepared and analyzed using ToF‐SIMS. The starch 2‐hydroxypropyltrimethylammonium chloride derivative generated characteristic fragments at m/z 58 and 59, which were identified as [H₂C?N(CH₃)₂]⁺ and [N(CH₃)₃]^+·, respectively. The fragmentation patterns were also suggested. From the imaging analysis, the adsorption of the cationic starch on fibers was uneven on individual fibers, as well as between fibers. This may have been on account of fiber morphology and structure. On examining scanning electron microscope (SEM) images, the quaternary ammonium starch derivative (QS) did not penetrate the fiber. No migration of cationic starch was observed under various drying conditions. Copyright © 2007 John Wiley & Sons, Ltd.     

Structural Studies of Transition Metal Compounds

A historical overview will be given on the structural studies on transition metal compounds and their interaction with other fields of coordination chemistry. About three decades have passed away since the structure and absolute configuration of tris(ethylenediamine)cobalt(III) complex ion were determined. At present accumulation of the structural data for isomers has enabled us to understand structural principles of chelate complexes in considerable detail. The energy minimization calculations can predict the detailed geometries of the complexes. Differences in thermodynamic properties between different conformers are well reproduced. Aspherical distribution of 3d electrons in transition metal complexes was detected for the first time in crystals of [Co(NH3)₆][Co(CN)₆] in 1973. Such an accurate electron density study provides important information on the d electrons placed in a ligand field. The high-spin and low-spin states can be distinguished unequivocally. In spite of a very small valence/total electron ratio, the asphericity of 4d and 5d electrons in a ligand field can be detected. The crystal structures of a series of dimeric copper(II) carboxylate adducts of the general formula [Cu(RCOO)₂L]₂ have been determined or redetermined as accurately as possible. The temperature dependent magnetic susceptibility of these crystals indicated that the isolated pairs of Cu(II) ions interact strongly through exchange forces. Molecular orbital calculations revealed that the electron population in the carbon atom of the bridging OCO group plays an important role in determining the strength of the spin superexchange interaction. In the crystals of some cobaloxime complexes, racemization of chiral groups bonded to Co proceeds on X-ray exposure without degradation of crystallinity. Several intermediate stages could be determined by X-ray analysis. Various reaction pathways were recognized and the reaction rate could be correlated with the atomic arrangement in the crystal.     

Changeable reactivity of ketyl radicals derived from 2-bromomethyl-2-(3-butenyl)benzocyclic-1-alkanones depending on electron transfer conditions employed

Photoinduced electron transfer reaction of 2-bromomethyl-2-(3-butenyl)benzocyclic-1-alkanones with amines afforded 5-exo radical cyclization products while electron transfer reaction with samarium diiodide produced cyclopropanols.     

Stereochemistry and mechanism of catalytic hydrogenation of substituted cyclohexanones

Substituted alkylcyclohexanones were hydrogenated over several transition metal catalysts. The hydrogenation with freshly prepared Raney Ni gave predominantly the axial alcohols but catalyst to which sodium hydroxide was added or aged catalyst increased the stereoselectivity. In contrast to the PtO₂ hydrogenation in which the equatorial alcohols were favoured, more axial alcohols were obtained than the equatorial counterparts on Pt-black. On Pd catalyst the isomeric ratios of the cyclohexanols changed as the reaction progressed. This may be due to a decrease in the amount of hydrogen available caused by the strong adsorption of ketones on the catalyst. Rh catalyst gave more of the axial alcohols than any other catalyst used in the present study.     

Gas chromatographic-mass spectrometric profile of organic acids in urine and serum of diabetic ketotic patients

The organic acids in the urine and serum of diabetic patients with ketoacidosis and disturbance of consciousness were studied using acidification, extraction, evaporation, methoxime formation and trimethylsilylation, gas chromatographic separation and mass spectrometric identification procedures. The organic acid profile of 1 ml of serum ultrafiltrate was obtained with good separation using a gas chromatograph equipped with a glass capillary column and a splitless injector. 5-Hydroxyhexanoic acid and 3-hydroxyvaleric acid were identified for the first time in the urine of diabetic patients with ketoacidosis. Urinary excretion and serum concentrations of 2,3-dideoxypentonic acid were increased in diabetic patients.     

Optical sensor for carbon dioxide combining colorimetric change of a pH indicator and a reference luminescent dye

A new optical CO₂ sensor based on the luminescence intensity change of the europium(III) complex tris(thenoyltrifluoroacetonato) europium(III) dihydrate ([Eu(tta)₃]) caused by the absorption change of various pH indicators—thymol blue, phenol red, or cresol red—with CO₂ was developed and its CO₂ sensing properties were investigated. For all the CO₂ sensors using pH indicators the observed luminescence intensity from [Eu(tta)₃] at 613 nm increased with increasing CO₂ concentration. The linear calibration method based on the plot of (I₁₀₀–I₀)/(I–I₀) versus the inverse of CO₂ concentration was suggested, where I₀ and I₁₀₀ were luminescence intensities at 613 nm of the CO₂ sensor film in 100% nitrogen and 100% gaseous CO₂. In all cases the plots showed good linearity and the correlation factors of the plots, r², were 0.991 for thymol blue, 0.990 for phenol red, and 0.998 for cresol red. The slopes of the plots (A/B) for thymol blue, phenol red, and cresol red were 2.2, 5.2, and 9.0%, respectively. The response times of the CO₂ sensor film were 4.0 s for thymol blue, 4.4 s for phenol red, and 8.8 s for cresol red for switching from nitrogen to CO₂, and the recovery times of films were 36 s for thymol blue, 39.2 s for phenol red, and 56.6 s for cresol red for switching from CO₂ to nitrogen. The signal changes were fully reversible and hysteresis was not observed during the measurements. The highly sensitive CO₂ sensor was developed using thymol blue as an indicator for the CO₂-sensing probe.     

Determination of sodium azide in beverages by ion chromatography

A convenient method for determination of sodium azide in beverages using ion chromatography is described. This method combines the specificity for azide with a simple sample preparation using a bubble and trap apparatus that removes any interferences. Sodium azide in a sample was acidified, and the azide was converted to the volatile hydrazoic acid, which was trapped in 2.5 mM sodium hydroxide solution. Determination was performed by isocratic ion chromatography using suppressed conductivity detection. Calibration curves were linear for 0.5 to 20 microg/mL sodium azide and the detection limit was 0.05 microg/mL. Recoveries of sodium azide from spiked samples (10.0 microg/g) were more than 82.6%. The method was then used to analyze various beverages.     

Surface derivatization of poly(p-phenylene terephthalamide) fiber designed for novel separation and extraction media

The surface derivatization of poly(p-phenylene terephthalamide) fiber was studied. The obtained surface-derivatized filaments were packed into a fused-silica capillary to evaluate its surface characteristics by using GC. As the stationary phase for GC the surface-derivatized fibers showed higher retention for alkanes and alkylbenzenes than that with the untreated Kevlar fiber. The improvements on the retention power and the peak shape were observed on the benzyl-modified fibrous stationary phase. The derivatized fibrous materials were also evaluated as the extraction medium in fiber-in-tube SPE, and the effect of the surface modification on the extraction power was compared to the parent fiber. The results indicated that the modified fiber possessed a higher extraction power than the untreated fiber. Based on the facts, the successful modification of the fiber surface was estimated.     

Remarkable reactivity enhancement with Sb?N inter-coordination of ethynyl-1,5-azastibocines in Pd-catalyzed cross-coupling reactions with organic halides

The reaction of 12-arylethynyl-6-methyl-5,6,7,12-tetrahydrodibenzo[c,f][1,5]-azastibocines with organic halides such as acyl halides and aryl halides in the presence of PdCl₂(PPh₃)₂ as a catalyst led to the formation of cross-coupling products, alkynyl ketones and diaryl acetylenes, in good yields. The reactivity of the ethynyl group on the 1,5-azastibocines was far superior to that on diphenyl(phenylethynyl)stibane, which brought about marked improvement in the reaction conditions (lower temperature and shorter reaction time) and in the yields of the cross-coupling products. Single-crystal X-ray analysis of the ethynyl-1,5-azastibocine showed the presence of intramolecular Sb?N interaction which should be responsible for the remarkable reactivity enhancement of the 1,5-azastibocines for this type of reaction.     

Hydrogen-bonded networks in organic conductors: crystal structures and electronic properties of charge-transfer salts of tetracyanoquinodimethane with 4,4'-biimidazolium having multiprotonated States

[structure: see text] Novel hydrogen-bonded charge-transfer salts of TCNQ with mono- and diprotonated 4,4'-biimidazolium were synthesized in order to demonstrate the high potential of the 4,4'-biimidazole system in a molecular conductor from the viewpoint of crystal engineering and electronic modulation. Crystal structure analyses of neutral 4,4'-biimidazole and TCNQ salts revealed the formation of two types of hydrogen-bonding modes of the 4,4'-biimidazole moiety depending on the protonated states. Neutral 4,4'-biimidazole possessed a linear chain mode of hydrogen-bonding to construct two-dimensional network. In the TCNQ salt of monoprotonated 4,4'-biimidazolium, the 4,4'-biimidazole moiety formed a dimer by a complementary mode of hydrogen-bonding. In contrast, the salt of diprotonated 4,4'-biimidazolium showed a double linear chain mode of hydrogen-bonding to construct a three-dimensional network. The formation of two types of hydrogen-bonding modes made the difference in the stacking patterns of TCNQ columns and in their transport properties. The TCNQ salt of diprotonated 4,4'-biimidazolium exhibited high electrical conductivity (sigma(rt) = 1.1 x 10(-1) S cm(-1)).