Fingerprints of Phalaenopsis Tissues in Growth and Spike Induction Periods—A Solid‐state 13C NMR Approach

Solid‐state Nuclear Magnetic Resonance (ss‐NMR) ¹³C single‐pulse excitation spectroscopy in combination with the magic‐angle spinning (MAS) technique was applied to a series of Phalaenopsis tissues, including the leaf, sheath, stem, and root, at different growth and spiking periods. Compared with{¹H}/¹³C cross‐polarization MAS spectra, the ¹³C single‐pulse excitation MAS spectra displayed very distinct spectral patterns, recognizable as fingerprints of the tissues studied. ¹Here, we demonstrate that solid‐state ¹³C single‐pulse excitation NMR spectroscopy provides a direct and robust analytical tool for studying the various tissues of Phalaenopsis in different growth and spiking induction periods.     

Improved staining of phosphoproteins with high sensitivity in polyacrylamide gels using Stains‐All

An improved Stains‐All (ISA) staining method for phosphoproteins in SDS‐PAGE was described. Down to 0.5–1 ng phosphoproteins (α‐casein, β‐casein, or phosvitin) can be successfully selectively detected by ISA stain, which is approximately 120‐fold higher than that of original Stains‐All stain, but is similar to that of commonly used Pro‐Q Diamond stain. Furthermore, unlike the original Stains‐All protocol that was time consuming and light unstable, ISA stain could be completed within 60 min without resorting to protect the gels from light during the whole staining procedure. According to the results, it is concluded that ISA stain is a rapid, sensitive, specific, and economic staining method for a broad application to the research of phosphoproteins.     

The study of the stability of aqueous three-phase fire-resistant foam in typical liquidus hydrocarbons

The utilization of solid particles in aqueous foam has a great potential in improving fire fighting efficiency. In this study, aqueous foam supported by micro fly-ash (FA) was prepared and its stability in a specific type of oil was characterized. Firstly, different amount of FA was added to study the influence of FA concentration on foamability. It showed that within a specific extent, foam expansion ratio increased with the increasing of FA concentration. And compared with conventional foams, oil resistance of FA stabilized foams, which was investigated by analyzing drainage rate and evolution process with a self-made apparatus, was remarkably improved when FA concentration exceed 4.8wt.%. Secondly, SiO₂ and Al₂O₃ particles with different median sizes were used to study the effect of particle size on stability. However, the smaller hydrophilic particles didn’t behave better as expected. Moreover, the foam stability in three hydrocarbons was evaluated in the same way. The results indicated that the short chain hydrocarbons had much stronger detrimental effect to both two-phase foam and three-phase foam. But overall, the three-phase foam stabilized by FA exhibited much better oil resistance, so it can be used as a promising material for pool fire extinguishing and prevention.GRAPHICAL ABSTRACT     

Synthesis and characterisation of 3-armed dendritic molecules with triphenylbenzene or triphenyltriazine as core and triphenylene derivative as shells

Two series 3-armed dendritic molecules with their 1,3,5-tris(4-methyloxyphenyl) benzene or 2,4,6-tris(4- hydroxylphenyl)-1,3,5-s-triazine core and triphenylene derivative shells connected by soft hydrocarbon chains have been synthesised and fully characterised. Whether liquid crystal (LC) or photoluminescence materials have been tuned by changing the length of the soft chain and they have been studied by POM, DSC, XRD, UV-Vis and PL. The results show that all the new dendritic compounds display UV to blue fluorescence in solvents such as DCM, THF and acetone. The TC3 compound bearing 1,3,5-tris(4-hydroxylphenyl) benzene core exhibits LC property with rectangular columnar phase (Col_r) on cooling.     

Crystallization of calcium carbonate controlled by Pluronic P123 in room-temperature ionic liquid

The crystallization of calcium carbonate (CaCO₃) controlled by Pluronic P123 in a room-temperature ionic liquid, ethylamine nitrate (EAN), was investigated. The CaCO₃ aggregates were obtained by rapid mixing of ammonium carbonate ((NH₄)₂CO₃) and calcium chloride (CaCl₂). Cubic calcite, spherical vaterite, and bagel-like vaterite were obtained easily by changing P123 concentration and reaction temperature. The morphologies of the as-prepared CaCO₃ aggregates were investigated by transmission electron microscopy and scanning electronic microscopy. The phase change of the obtained crystals was confirmed by X-ray diffraction and Fourier transform infrared spectroscopy. It was shown that higher P123 concentration and higher reaction temperature favor the formation of vaterite in EAN. Unusual bagel-like vaterite was first obtained at 60 °C in the presence of 5 g/L P123 in EAN. Mineralization of CaCO₃ regulated by P123 in EAN is a simple, novel, and environment-friendly strategy for vaterite synthesis.     

A p‐Quinodimethane‐Bridged Porphyrin Dimer

A p‐quinodimethane (p‐QDM)‐bridged porphyrin dimer 1 has been prepared for the first time. An unexpected Michael addition reaction took place when we attempted to synthesize compound 1 by reaction of the cross‐conjugated keto‐linked porphyrin dimers 8 a and 8 b with alkynyl/aryl Grignard reagents. Alternatively, compound 1 could be successfully prepared by intramolecular Friedel–Crafts alkylation of the diol‐linked porphyrin dimer 14 with concomitant oxidation in air. Compound 1 shows intense one‐photon absorption (OPA, λ_max=955 nm, ε=45400 M ^?1 cm^?1) and a large two‐photon absorption (TPA) cross‐section (σ⁽²⁾_max=2080 GM at 1800 nm) in the near‐infrared (NIR) region due to its extended π‐conjugation and quinoidal character. It also exhibits a short singlet excited‐state lifetime of 25 ps. The cyclic voltammogram of 1 displays multiple redox waves with a small electrochemical energy gap of 0.86 eV. The ground‐state geometry, electronic structure, and optical properties of 1 have been further studied by density functional theory (DFT) calculations and compared with those of the keto‐linked dimer 8 b . This research has revealed that incorporation of a p‐QDM unit into the porphyrin framework had a significant impact on its optical and electronic properties, leading to a novel NIR OPA and TPA chromophore.     

Microstructure, distribution and properties of conductive polypyrrole/cellulose fiber composites

Highly intrinsic conductive polypyrrole/cellulose fiber composites (CF) were successfully prepared through in situ chemical oxidation polymerization simply by increasing fiber concentration at the same dosage of pyrrole, oxidant and dopant (based on the weight of dry fiber). FeCl₃ and anthraquinone-2-sulfonic acid sodium salt (AQSNa) were utilized as oxidant and dopant. As fiber concentration increased from 1 % (CF1) to 20 % (CF20), N and S content increased from 0.24 and 0.25 % to 1.24 and 0.89 %, and great increase in the retention of PPy and AQSNa was confirmed by elemental analysis. In addition, on the surface of conductive fiber, PPy of compact fibroid structure was detected instead of interconnected globular structure at higher fiber concentration. Furthermore, scanning transmission electron microscope and X-ray photoelectron spectroscopy (XPS)-depth profile analysis demonstrated denser and more uniformly distributed PPy inside fiber wall for CF20, while PPy tended to deposit on the surface of fiber for CF1. Fourier transform infrared spectroscopy, together with XPS certified that the PPy with longer conjugation length and higher doping level across the conductive fiber was obtained at higher fiber concentration. The doping level for CF10 decreased from 21.55 to 16.39 % with increasing fiber wall thickness, while that of CF20 decreased slightly from 30.73 to 24.10 %. The resulting CF20 showed lowest surface resistivity of 0.433 KΩ/square, as well as improved electro-conductivity stability. The incorporation of more PPy in CF improved the thermal stability.     

近紫外LED激发荧光粉Ba0.11Sr2.89-2xCexNaxAlO4F发光特性

采用高温固相法反应制备Ba0.11Sr2.89-2x Ce x Na x AlO4F(x=0.01,0.02,0.05,0.07,0.10,0.15)荧光粉。Ba0.11Sr2.89AlO4F体系中存在Sr(1)2+和Sr2+(2)两个格位。Sr2+(1)离子位于Wyck.4a格位,为十配位多面体构型。Sr2+(2)离子位于Wyck.8h格位,为八配位的多面体构型。研究了Ba0.11Sr2.89-2x Ce x Na x AlO4F荧光粉的紫外-可见激发、发射光谱、荧光寿命及能量传递过程,讨论并指认了Ce3+在上述两个格位中的激发带位置及能级重心,发射光谱曲线分别由两个~463,~505和~550 nm宽带发射构成。随着Ce3+浓度增加,长波发射~550 nm逐渐增强,而色品坐标(x=0.199,y=0.351)蓝绿区逐渐变化到黄绿区域(x=0.389,y=0.489)。     

基于柱[n]芳烃(准)轮烷的研究进展

柱芳烃作为一类新型的大环主体分子,自2008年首次报道以来,引起了人们,特别是化学家的广泛关注.目前,它已在分子识别、(准)轮烷、超分子聚合物、分子弹簧、智能跨膜离子通道、囊泡、金属有机骨架结构等众多研究领域作为重要模块得到初步的应用.主要将以柱芳烃作为主体大环分子来构筑(准)轮烷的研究进展进行简要的综述,同时还介绍了基于柱芳烃的(准)聚轮烷的研究概况,并对未来的发展作了进一步展望.     

Synthesis,Persistent Luminescence,and Thermoluminescence Properties of Yellow Sr3SiO5:Eu2+,RE3+ (RE=Ce,Nd, Dy,Ho, Er,Tm, Yb) and Orange‐Red Sr3−xBaxSiO5:Eu2+, Dy3+ Phosphor

Sunlight‐excitable orange or red persistent oxide phosphors with excellent performance are still in great need. Herein, an intense orange‐red Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ persistent luminescence phosphor was successfully developed by a two‐step design strategy. The XRD patterns, photoluminescence excitation and emission spectra, and the thermoluminescence spectra were investigated in detail. By adding non‐equivalent trivalent rare earth co‐dopants to introduce foreign trapping centers, the persistent luminescence performance of Eu²⁺ in Sr₃SiO₅ was significantly modified. The yellow persistent emission intensity of Eu²⁺ was greatly enhanced by a factor of 4.5 in Sr₃SiO₅:Eu²⁺,Nd³⁺ compared with the previously reported Sr₃SiO₅:Eu²⁺, Dy³⁺. Furthermore, Sr ions were replaced with equivalent Ba to give Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ phosphor, which shows yellow‐to‐orange‐red tunable persistent emissions from λ=570 to 591 nm as x is increased from 0 to 0.6. Additionally, the persistent emission intensity of Eu²⁺ is significantly improved by a factor of 2.7 in Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ (x=0.2) compared with Sr₃SiO₅:Eu²⁺,Dy³⁺. A possible mechanism for enhanced and tunable persistent luminescence behavior of Eu²⁺ in Sr_3?xBa_xSiO₅:Eu²⁺,RE³⁺ (RE=rare earth) is also proposed and discussed.