Anomalous grazing incidence small-angle x-ray scattering studies of platinum nanoparticles formed by cluster deposition

The size evolution of platinum nanoparticles formed on a SiO2/Si(111) substrate as a function of the level of surface coverage with deposited clusters has been investigated. The anisotropic shapes of sub-nanometer-size nanoparticles are changed to isotropic on the amorphous substrate as their sizes increased. Using anomalous grazing incidence small-angle x-ray scattering (AGISAXS), the scattering from nanoparticles on the surface of a substrate is well separated from that of surface roughness and fluorescence. We show that AGISAXS is a very effective method to subtract the background and can provide unbiased information about particle sizes of less than 1 nm.     

Shock Tube Measurements of the Rate Constant of the Reaction NCN + O2

The rate constant of the comparably slow bimolecular NCN radical reaction NCN + O₂ has been measured for the first time under combustion relevant conditions using the shock tube method. The thermal decomposition of cyanogen azide (NCN₃) served as a clean high‐temperature source of NCN radicals. NCN concentration–time profiles have been detected by narrow‐bandwidth laser absorption at cm^?1. The experiments behind incident shock waves have been performed with up to 17% O₂ in the reaction gas mixture. At such high O₂ mole fractions, it was necessary to take O₂ relaxation into account that caused a gradual decrease of the temperature during the experiment. Moreover, following fast decomposition of NCN₃ and collision‐induced intersystem crossing of the initially formed singlet NCN to its triplet ground state, an unexpected and slow additional formation of triplet NCN has been observed on a 100‐μs timescale. This delayed NCN formation was attributed to a fast recombination of ¹NCN with O₂ forming a ³NCNOO adduct acting as a reservoir species for NCN. Rate constant data for the reaction NCN + O₂ have been measured at temperatures between 1674 and 2308 K. They are best represented by the Arrhenius expression . No pressure dependence has been observed at pressures between 216 and 706 mbar.     

Structural Factors and Mechanisms Underlying the Improved Photodynamic Cell Killing with Silicon Phthalocyanine Photosensitizers Directed to Lysosomes Versus Mitochondria

The phthalocyanine photosensitizer Pc 4 has been shown to bind preferentially to mitochondrial and endoplasmic reticulum membranes. Upon photoirradiation of Pc 4-loaded cells, membrane components, especially Bcl-2, are photodamaged and apoptosis, as indicated by activation of caspase-3 and cleavage of poly(ADP-ribose) polymerase, is triggered. A series of analogs of Pc 4 were synthesized, and the results demonstrate that Pcs with the aminopropylsiloxy ligand of Pc 4 or a similar one on one side of the Pc ring and a second large axial ligand on the other side of the ring have unexpected properties, including enhanced cell uptake, greater monomerization resulting in greater intracellular fluorescence and three-fold higher affinity constants for liposomes. The hydroxyl-bearing axial ligands tend to reduce aggregation of the Pc and direct it to lysosomes, resulting in four to six times more killing of cells, as defined by loss of clonogenicity, than with Pc 4. Whereas Pc 4-PDT photodamages Bcl-2 and Bcl-xL, Pc 181-PDT causes much less photodamage to Bcl-2 over the same dose–response range relative to cell killing, with earlier cleavage of Bid and slower caspase-3-dependent apoptosis. Therefore, within this series of photosensitizers, these hydroxyl-bearing axial ligands are less aggregated than is Pc 4, tend to localize to lysosomes and are more effective in overall cell killing than is Pc 4, but induce apoptosis more slowly and by a modified pathway.     

Chromium(III) Hydroxide Solubility in the Aqueous K+-H+-OH?-CO2-HCO 3? -CO 32? -H2O System: A?Thermodynamic Model

Chromium(III)-carbonate reactions are expected to be important in managing high-level radioactive wastes. Extensive studies on the solubility of amorphous Cr(III) hydroxide solid in a wide range of pH (3–13) at two different fixed partial pressures of CO₂(g) (0.003 or 0.03 atm.), and as functions of K₂CO₃ concentrations (0.01 to 5.8 mol⋅kg⁻¹) in the presence of 0.01 mol⋅dm⁻³ KOH and KHCO₃ concentrations (0.001 to 0.826 mol⋅kg⁻¹) at room temperature (22±2 °C) were carried out to obtain reliable thermodynamic data for important Cr(III)-carbonate reactions. A combination of techniques (XRD, XANES, EXAFS, UV-Vis-NIR spectroscopy, thermodynamic analyses of solubility data, and quantum mechanical calculations) was used to characterize the solid and aqueous species. The Pitzer ion-interaction approach was used to interpret the solubility data. Only two aqueous species [Cr(OH)(CO₃)₂²⁻ and Cr(OH)₄CO₃³⁻] are required to explain Cr(III)-carbonate reactions in a wide range of pH, CO₂(g) partial pressures, and bicarbonate and carbonate concentrations. Calculations based on density functional theory support the existence of these species. The log ₁₀ K° values of reactions involving these species [{Cr(OH)₃(am) + 2CO₂(g)⇌Cr(OH)(CO₃)₂²⁻+2H⁺} and {Cr(OH)₃(am) + OH⁻+CO₃²⁻ ⇌Cr(OH)₄CO₃³⁻}] were found to be −(19.07±0.41) and −(4.19±0.19), respectively. No other data on any Cr(III)-carbonato complexes are available for comparisons.     

Composition-controlled synthesis of bimetallic gold-silver nanoparticles

This paper reports findings of an investigation of the synthesis of monolayer-capped binary gold-silver (AuAg) bimetallic nanoparticles that is aimed at understanding the control factors governing the formation of the bimetallic compositions. The synthesis of alkanethiolate-capped AuAg nanoparticles was carried out using two related synthetic protocols using aqueous sodium borohydride as a reducing agent. One involves a two-phase reduction of AuCl(4)(-), which is dissolved in organic solution, and Ag(+), which is dissolved in aqueous solution. The other protocol involves a two-phase reduction of AuCl(4)(-) and AgBr(2)(-), both of which are dissolved in the same organic solution. AuAg nanoparticles of 2-3 nm core sizes with different compositions in the range of 0-100% Au have been synthesized. The two synthetic routes were compared in terms of bimetallic composition and size properties. Our new findings have allowed us to establish the correlation between synthetic feeding of metals and metal compositions in the bimetallic nanoparticles, which have important implications to the exploration of gold-based bimetallic nanoparticles for constructing sensing and catalytic nanomaterials.     

Valine and phenylalanine as precursors in the biosynthesis of alkamides in Acmella radicans

Acmella radicans (Asteraceae) produces at least seven alkamides, most with either an isobutyl- or phenylethyl group as the amine moiety. These moieties suggest that the amino acids valine and phenylalanine are the biosynthetic precursors of these alkamides. On the basis of labeled feeding experiments using either L-[2H8]valine or L-[2H8]phenylalanine we present evidence for the involvement of these two amino acids in the biosynthesis of (2E,6Z,8E)-N-isobutyl-2,6,8-decatrienamide (affinin) (1), (2Z,4E)-N-(2-phenylethyl)-2,4-octadienamide (2), (2E)-N-(2-phenylethyl)-nona-2-en-6,8-diynamide (3), and 3-phenyl-N-(2-phenylethyl)-2-propenamide (4). Alkamides were isolated from young A. radicans plants and analyzed by gas chromatography-mass spectrometry (GC-MS). Additionally, in cell free in vitro experiments based on isobutyl and phenylethylamide biosynthesis, using a colorimetric assay and GC-MS, valine and phenylalanine decarboxylase activities were assayed in the soluble extract of A. radicans leaves.     

Stabilizing carbon-lithium stars

We have explored in silico the potential energy surfaces of the C(5)Li(n)(n-6) (n = 5, 6, and 7) clusters using the Gradient Embedded Genetic Algorithm (GEGA) and other computational strategies. The most stable forms of C(5)Li(5)(-) and C(5)Li(6) are two carbon chains linked by two lithium atoms in a persistent seven membered ring capped by two Li atoms. The other Li atoms are arrayed on the edge of the seven membered ring. In contrast, the global minimum structure for C(5)Li(7)(+) is a bicapped star of D(5h) symmetry. The molecular orbital analysis and computed magnetic field data suggest that electron delocalization, as well as the saturation of the apical positions of the five-membered carbon ring with lithium atoms in C(5)Li(7)(+) plays a key role in the stabilization of the carbon-lithium star. In fact, the planar star sub-structure for the carbon ring are unstable without the apical caps. This is also what has been found for the Si analogues. The split of the B(ind)(z) in its σ- and π-contribution indicates that C(5)Li(7)(+) is a π-aromatic and σ-nonaromatic system.     

Solubility of (UO2)3(PO4)2?4H2O in H+-Na+-OH?-H2PO?4-HPO2?4-PO3?4-H2O and Its Comparison to the Analogous PuO2 +2 System

The objectives of this study were to address uncertainties in the solubility product of (UO₂)₃(PO₄)₂⋅4H₂O(c) and in the phosphate complexes of U(VI), and more importantly to develop needed thermodynamic data for the Pu(VI)-phosphate system in order to ascertain the extent to which U(VI) and Pu(VI) behave in an analogous fashion. Thus studies were conducted on (UO₂)₃(PO₄)₂⋅4H₂O(c) and (PuO₂)₃(PO₄)₂⋅4H₂O(am) solubilities for long-equilibration periods (up to 870 days) in a wide range of pH values (2.5 to 10.5) at fixed phosphate concentrations of 0.001 and 0.01 M, and in a range of phosphate concentrations (0.0001–1.0 M) at fixed pH values of about 3.5. A combination of techniques (XRD, DTA/TG, XAS, and thermodynamic analyses) was used to characterize the reaction products. The U(VI)-phosphate data for the most part agree closely with thermodynamic data presented in Guillaumont et al.,⁽¹⁾ although we cannot verify the existence of several U(VI) hydrolyses and phosphate species and we find the reported value for formation constant of UO₂PO⁻₄ is in error by more than two orders of magnitude. A comprehensive thermodynamic model for (PuO₂)₃(PO₄)₂⋅4H₂O(am) solubility in the H⁺-Na⁺-OH⁻-Cl⁻-H₂PO⁻₄-HPO²⁻₄-PO³⁻₄-H₂O system, previously unavailable, is presented and the data shows that the U(VI)-phosphate system is an excellent analog for the Pu(VI)-phosphate system.     

H(2) formation by electron irradiation of SBA-15 materials and the effect of Cu(II) grafting

Measurement of H(2) production from electron irradiation (10 MeV) on SBA-15 materials has shown that adsorbed water is attacked preferentially. Silanol groups are only attacked when they are in the majority with respect to adsorbed water, however they are much less efficient at producing H(2). The comparison between water content before and after electron irradiation and the corresponding H(2) production indicates that water desorption is the main route to adsorbed water loss for SBA-15 materials. On the other hand, surface silanol groups are more susceptible to attack, leading to H(2) production when SBA-15 samples have undergone extensive thermal treatment. Electron irradiation of SBA-15-Cu materials has shown that the presence of Cu(II) on the surface reduces and inhibits the production of H(2.) This inhibiting power affects adsorbed water bonded to grafted copper but not surface silanol groups.     

Determination of lewisite constituents in aqueous samples using hollow-fibre liquid-phase microextraction followed by gas chromatography-mass spectrometry

The applicability of hollow-fibre liquid-phase microextraction for extracting 2-chlorovinyldichloroarsine (lewisite 1), bis(2-chlorovinyl)chloroarsine (lewisite 2), tris(2-chlorovinyl)arsine (lewisite 3) and arsenic trichloride from aqueous samples is reported. Parameters affecting the extraction efficiency of these chemicals were optimised. These parameters included the type of derivatising agent, extraction solvent, derivatisation method, pH, ionic strength, stirring speed and extraction time. A linear range between 0.002 and 0.2 μg/mL was established for the lewisites with good square regression coefficients (0.9955–0.9992). Good reproducibility with relative standard deviations (RSDs) from 8 to 10 % was achieved. The limit of detection was 0.002 μg/mL for the lewisites and 0.005 μg/mL for arsenic trichloride (3:1 signal-to-noise ratio). The extraction method was validated with a proficiency test sample issued by the Organisation for the Prohibition of Chemical Weapons (OPCW). The rapidity and precision of the new method should help deter against the employment of lewisite as a chemical warfare agent: its use could be confirmed easily from analysis of aqueous samples.