RE(CCl_3COO)_3(Phen)_2·nH_2O混配配合物的合成、性质及晶体结构

利用水和乙醇混合溶剂合成了稀土三氯醋酸盐与2份1,10-邻菲绕啉(phen)配合物RE(CCl_3COO)_3(phen)_2·nH_2O(RE=Nd,Sm,n=0;RE=Eu,n=2)的单晶.结构测定表明,Nd(CCl_3COO)_3(phen)_2为三斜晶系,每个三氯醋酸盐均以双齿配位,2个phen亦为双齿配位,故配位单元中钕为10配位;Eu(CCl_3COO)_3(phen)_2·2H_2O为单斜晶系,1个三氯醋酸根在外界,2个三氯醋酸根为单齿配位,2个phen为双齿配位,另有2分配位水,故配位单元中Eu为8配位.     

A novel Fe（OH）3/TiO2 nanoparticles and its high photocatalytic activity

A very simple and controllable approach was proposed to synthesize novel Fe(OH)_3/TiO_2 nanoparticles.Compared with neat TiO2,the Fe(OH)_3/TiO_2 increased the rate of the photocatalytic degradation of methyl orange at pH 6.0 by more than five times, showing photocatalytic activity as excellent as P25.This enhancing effect is mainly attributed to the ferric hydroxide deposits as the electron scavenger and the enriched surface hydroxyl groups.     

二茂铁亚胺环钯化合物－－一种新型芳基氯化汞偶联催化剂

发现在催化量二茂铁亚胺环钯化合物催化下，芳基氯化汞可在湿和条件下偶联 ，以中等或高的收率生成联芳烃。对于铑盐不能催化偶联的邻位取代苯基氯化汞和 α－基氯化汞，在此体系中亦可发生偶联。以HMPA为溶剂，在x = 0.025（摩尔分 数）化合物1或2催化下与2.0当量氯化锂存在时，得到最好的催化效果。     

Fe3+/V5+/TiO2复合纳米微粒光催化性能的研究

采用溶胶凝胶法制备了Fe^3 /V^5 /TiO2复合纳米微粒作为光催化剂。光降解反应结果表明，其掺杂催化剂Fe^3 /V^5 /TiO2的光催化活性明显提高。光电化学研究显示，铁离子可以成为电荷陷阱，促进空穴的界面传递反应。适量钒离子掺杂使TiO2电极的光电流升高，导带中电子浓度的增大，加快了界面的电子传递反应。共掺杂催化剂中，Fe^3 、V^5 分别提供了空穴与电子的陷阱，同时加快了电子与空穴的界面传递反应，从 更有效地提高光催化活性。双组份共掺杂为提高TiO2光催化活性提供新的途径。     

稀土钬及铒钇丙氨酸配合物的量热与热分析研究

合成了两种固态稀土丙氨酸配合物[Ho2(Ala)4(H2O)8]Cl6和[ErY(Ala)4(H2O)8](ClO4)6 (Ala为丙氨酸),用量热和热分析方法研究了这两种配合物的热力学性质.用全自动高精密绝热量热计测定了在78～377 K温区内的低温热容.对于[Ho2(Ala)4(H2O)8]Cl6,在214～255 K温区内发现一固-固相变,其相变温度为235.09 K.对于[ErY(Ala)4(H2O)8](ClO4)6,在99～121 K温区内也发现一固-固相变,其相变温度为115.78 K. [Ho2(Ala)4(H2O)8]Cl6固-固相变焓为3.02 kJ• mol－1,相变熵为12.83 J•K－1•mol－1； [ErY(Ala)4(H2O)8](ClO4)6 固-固相变焓为1.96 kJ•mol－1,相变熵为16.90 J•K－1•mol－1.同时,用TG技术在40～800 ℃温区研究了两配合物的热稳定性.由TG/DTG曲线分析可知, [Ho2(Ala)4(H2O)8]Cl6从80 ℃到479 ℃热分解分两步完成, [ErY(Ala)4(H2O)8](ClO4)6从120 ℃到430 ℃热分解分三步完成.     

Patterned polyelectrolyte multilayer: surface modification for enhancing selective adsorption

This paper describes the use of surface chemical modification to enhance the difference of the surface charge on a patterned polyelectrolyte multilayer, which can be used for selectively adsorbing functional materials. We fabricated a patterned multilayer by combining the layer-by-layer self-assembly technique and photolithography and taking advantage of the different solubility of polyelectrolyte multilayers of diazo resins (DAR)/poly(acrylic acid) before and after UV irradiation. This patterned surface can be used as a matrix for selective adsorption of small molecular dyes, such as Methylene Blue. However the difference in surface charge on the patterned surface was not enough when we used it to selectively adsorb polystyrene (PS) nanoparticles using electrostatic force as the driving force. Therefore, we modified the patterned surface by interfacial chemistry. After modification, the patterned polyelectrolyte multilayer can be used as a good matrix for selective adsorption of PS nanoparticles with both positive and negative charges.     

Synthesis and stereochemical assignment of 7-arylidene and 7-heteroarylidene morphinan-6-ones

A number of (E)-7-arylidenenaltrexones were synthesized by azeotropic distillation of water from a benzene solution of naltrexone and an aromatic aldehyde (benzaldehyde, 4-chloro- and 4-fluorobenzaldehyde, 3-and 4-pyridinecarboxaldehyde and 1-methyl-2-imidazolecarboxaldehyde) using piperidine as a catalyst. In addition, (E)-7-benzylidenenaloxone was prepared by the previously published Claisen-Schmidt condensation using sodium hydroxide in methanol. The stereochemistry of these arylidene derivatives 3–9 was determined to be (E) by means of nuclear Overhauser enhancement experiments. The ¹³C nmr spectra of (E)- 3–9 are recorded in deuteriochloroform and those of the hydrochlorides in deuteriodimethyl sulfoxide.     

Ti基IrO2＋Ta2O5阳极在H2SO4溶液中的电解时效行为

研究了450 ℃制备所得Ti/70％IrO2 30％Ta2O5（摩尔分数）高寿命阳极在H2SO4溶液电解过程中电极的物理、化学及电化学性能的时效行为.结果发现，整个电解过程可分为“活化”、“稳定”及“失效”三个阶段.在“活化”及“稳定”区内主要发生电极表面活性氧化物的溶解，涂层中IrO2金红石相的（110）、（101）晶面择优取向随电解时间延长而减弱，而（002）晶面择优增强.但是在“失效区”内，各晶面的择优程度却不随电解时间的变化而变化，这表明在“失效区”内氧化物的损失机制发生了变化.电化学阻抗谱测试表明，电极的析氧电化学反应电阻随电解时间的延长发生缓慢而连续的上升，而整个电极的物理阻抗在“失效区”内却发生突升现象.X射线衍射分析（XRD）表明，随电解时间的延长TiO2金红石相的衍射强度增大，达“失效区”时衍射强度发生突升.根据实验现象特别是“失效区”内阳极的时效行为提出高寿命Ti基氧化物涂层阳极的失效机制.     

Synthesis of benzylidene-pendant polyphthalimidines from flexible bisphthalides and various diamines

New polyphthalimidine-forming monomers, 5,5′-(oxydi-p-phenylenedicarbonyl)bis(3-benzylidenephthalide) and the 6,6′-derivative, were synthesized by the Friedel–Crafts reaction of diphenyl ether with 5- and 6-chloroformyl-3-benzylidenephthalide, respectively. The direct polycondensation of these bisphthalides with both aliphatic and aromatic diamines in o-phenylphenol at 200–250°C afforded polyphthalimidines having inherent viscosities of 0.2–1.2 dL/g in almost quantitative yields. Syntheses of aliphatic polyphthalimidines with higher inherent viscosities were also achieved by a two-step procedure involving ring-opening polyaddition and subsequent thermal cyclodehydration. All the polymers were amorphous and readily soluble in N-methyl-2-pyrrolidone (NMP), m-cresol, nitrobenzene, pyridine, and chloroform. Tough and flexible films could be cast from NMP solutions of the polymers. Glass transition temperatures of the polyphthalimidines were in the range of 158–246°C. The thermogravimetry of the aromatic polymers showed 10% weight loss in air and nitrogen at 445–515 and 500–520°C, respectively. The crosslinking reaction of some benzylidenependant polyphthalimidines took place at 300°C through double-bond addition to afford cured polymers with improved thermal stability.     

乙醇和甲苯组成的最低共沸混合物热力学性质的研究

The molar heat capacity of the azeotropic mixture composed of ethanol and toluene was measured by a high precision adiabatic calorimeter from 80 to 320 K. The glass transition and phase transitions of the azeotropic mixture were determined based on the heat capacity measurements. A glass transition at 103.350 K was found. A solid-solid phase transition at 127.282 K, two solid-liquid phase transitions at 153.612 and 160.584 K were observed, which correspond to the transition of metastable crystal to stable crystal of ethanol and the melting of ethanol and toluene, respectively. The thermodynamic functions and the excess ones of the mixture relative to the standard temperature 298.15 K were derived based on the relationships of the thermodynamic functions and the function of the measured heat capacity with respect to temperature.