Gear-like array of (H_2O)_(12) as building blocks in one-dimensional supramolecular assembly

The preparation and crystal structure of complex Co(Hsae)_2·2H_2O (1,H_2sae=N-salicylidene-2-iminoethanol) are reported.X- ray analysis revealed that every six Co(Hsae)_2 forms a cyclic chip and every 12 water forms a novel gear-like cluster.Acting as building blocks,the gear-like water cluster and complex chip are connected in A-B fashion and extend into one-dimensional supramolecular chain.Hydrogen bond is the primary bridging force in the formation of supramolecular framework.     

Indium (III) Tribromide : An Excellent Catalyst for Biginelli Reaction

A highly efficient catalyst indium (III) tribromide is used to synthesize 5-alkoxy- carbonyl-4-hydrocarbyl-3,4-dihydropyrimidin-2(1H)-ones by a three-component coupling of β-keto ester, aldehydes and urea through improved Biginelli reaction.     

飞行时间型质量分析器(TOFMS)的研制及应用

自行研制了电子碰撞离子化的飞行时间型质量分析器（ＴＯＦＭＳ），用于物质的化学分析。用研制的ＴＯＦＭＳ测量了Ａｒ离子化的飞行时间谱和离子的部分电离截面积比与碰撞电子能量的依赖关系，将它与Ｓｔｅｐｓｈａｎ等人的实验结果进行了比较。     

First total synthesis of leucamide A

The first total synthesis of marine bioactive cyclic heptapeptide Leucamide A has been accomplished, including a simple method for construction of the 4,2-bisheterocycle tandem pair substructure that employs a DAST-mediated cyclization of beta-hydroxy amide and final HBTU-promoted ring closing.     

溶剂和酰基受体对α-氰基-3-苯氧基苄醇乙醇的酶促对映体选择性转酯化反应的影响

研究了在有机溶剂中固定化Alcaligenes sp.脂肪酶催化α-氰基-3-苯氧基苄醇乙酯的对映体选择性转酯化反应，考察了不同性质的溶剂和酰基受体对酶的催化活性和选择性以及对产物稳定性的影响．结果发现在弱极性溶剂如正己烷中酶具有较高的催化活性但产物e．e．％值低，而且容易分解；在四氢呋喃等溶剂中酶催化活性相对低，但产物e．e．％值高，也较为稳定；但反应时间太长，会导致产物分解及纯度下降；不同酰基受体对酶反应无显著影响，甲醇为最佳酰基受体，太多醇会导致反应速率下降；溶剂水含量大于2．0％时对酶活性和产物稳定性产生明显不利影响．在优化条件下，酶反应可得到（S）-α-氰基-3-苯氧基苄醇产率＞48％，纯度＞99％e．e．     

Fabrication of a novel Li<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>MoO<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> film modified electrode and its application as an electrochemical sensor of iodate

A novel organic gel film modified electrode was simply and conveniently fabricated by casting Li_xMoO_y and polypropylene carbonate (PPC) onto the surface of a gold electrode. The cyclic voltammetry and amperometry studies demonstrated that the Li_xMoO_y film modified electrode has a high stability and a good electrocatalytic activity for the reduction of iodate. In amperometry, a good linear relationship between the steady current and the concentration of iodate was obtained in the range from 3×10^–7 to 1×10^–4 mol L^–1 with a correlation coefficient of 0.9997 and a detection limit of 1×10^–7 mol L^–1.     

甲醛与乙醛,甲醚,硝基甲烷相互作用的从头算研究

用6-31G、全构型优化,研究了甲醛与乙醛、甲醚、硝基甲烷的相互作用。结果表明所有超分子稳定构型都包含2个C—H—O氢键的平面环状结构。H—O距离为0.228～0.264 nm,作用能为—19～—24 kJ/mol,与二聚水的作用能接近。稳定性主要取决于甲基上取代基Y吸电子能力以及环状结构中氢键张力。STO-3G不很适用于研究这类分子的相互作用。     

Preparation of multihollow P(St-MAA) particles by sequence soap-free/soap emulsion polymerization and followed by stepwise alkali/acid posttreatment

The effects of ionic emulsifier, sodium dodecylbenzene sulfate (SDBS), on the formation of the multihollow structures in sub-micron sized polymer particles produced by alkali/acid posttreatment were investigated. The original latex particles with narrow size distribution were synthesized by a new sequence emulsifier-free/emulsifier emulsion copolymerization of styrene (St) and methacrylic acid (MAA). Results indicated that the pore size decreased and the pore number increased with the increase of SDBS amount, and the morphology of the posttreated latex particles was also significantly influenced by the introducing time of SDBS in the preparation of the original latex particles, and a suitable introducing time was 3 h of polymerization.     

Enhanced and selective adsorption of mercury ions on chitosan beads grafted with polyacrylamide via surface-initiated atom transfer radical polymerization

Enhanced and selective removal of mercury ions was achieved with chitosan beads grafted with polyacrylamide (chitosan-g-polyacrylamide) via surface-initiated atom transfer radical polymerization (ATRP). The chitosan-g-polyacrylamide beads were found to have significantly greater adsorption capacities and faster adsorption kinetics for mercury ions than the chitosan beads. At pH 4 and with initial mercury concentrations of 10-200 mg/L, the chitosan-g-polyacrylamide beads can achieve a maximum adsorption capacity of up to 322.6 mg/g (in comparison with 181.8 mg/g for the chitosan beads) and displayed a short adsorption equilibrium time of less than 60 min (compared to more than 15 h for the chitosan beads). Coadsorption experiments with both mercury and lead ions showed that the chitosan-g-polyacrylamide beads had excellent selectivity in the adsorption of mercury ions over lead ions at pH < 6, in contrast to the chitosan beads, which did not show clear selectivity for either of the two metal species. Mechanism study suggested that the enhanced mercury adsorption was due to the many amide groups grafted onto the surfaces of the beads, and the selectivity in mercury adsorption can be attributed to the ability of mercury ions to form covalent bonds with the amide. It was found that adsorbed mercury ions on the chitosan-g-polyacrylamide beads can be effectively desorbed in a perchloric acid solution, and the regenerated beads can be reused almost without any loss of adsorption capacity.     

Itosides A – I,New Phenolic Glycosides from Itoa orientalis

Eight new benzoylated gentisyl alcohol (=2‐(hydroxymethyl)benzene‐1,4‐diol) glucosides, itosides A–H ( 1 – 8 ), together with the new pyrocatechol (=benzene‐1,2‐diol) glycoside itoside I ( 9 ) were isolated from the bark and twigs of Itoa orientalis (Flacourtiaceae). In itosides B–D ( 2 – 4 ), the gentisyl alcohol moiety was esterified by 1‐hydroxy‐6‐oxocyclohex‐2‐ene‐1‐carboxylic acid, while itosides E–H ( 5 – 8 ) contained instead an additional 2‐hydroxybenzoic acid moiety. The compounds were accompanied by the known derivatives 4‐hydroxytremulacin ( 10 ), poliothyrsoside ( 11 ), poliothyrsin ( 12 ), homaloside D ( 13 ), tremulacin, and pyrocatechol β‐D ‐glucopyranoside. The structures of the new compounds were elucidated by spectral and chemical methods.