Degradation of phenol using a combination of ultrasonic and UV irradiations at pilot scale operation

In the present work, combination of ultraviolet (UV) irradiations (using 8 W UV tube) with ultrasonic (US) irradiations (rated power 1 kW and frequency of 25 kHz) has been investigated for the degradation of phenol at pilot scale of operation. Different modes of operation viz. UV alone, US alone, UV/US, UV/TiO₂ (photocatalysis), UV/H₂O₂, UV/NaCl, UV/US/TiO₂ (sonophotocatalysis) and H₂O₂ assisted sonophotocatalysis have been investigated with an objective of maximizing the extent of phenol degradation. Effect of presence of hydrogen peroxide and sodium chloride at a concentration of 10 g/l and TiO₂ over a range of 0.5–2.5 g/l has been investigated. It has been observed that 2.0 g/l of TiO₂ is the optimum concentration, beyond which a decrease in the extent of degradation is observed. Maximum extent of degradation of phenol was 37.75% for H₂O₂ assisted photosonocatalysis at pH of 2. The present work is first of its kind to report the use of combined ultrasonic and UV irradiations at pilot scale operation and obtained results should induce some degree of certainty in proposed industrial applications of sonochemical reactors for wastewater treatment.     

A scale model investigation of sound reflection from building façades

A simple model for predicting the sound reflected from a building façade is developed based upon the assumption that the scattering coefficient is small. This model is then used as the basis of an experimental attempt to measure the scattering properties of scale model façades featuring a similar degree of surface irregularity to that found on real buildings. A series of measurements made on a simple scale model are described and the effect of a non-uniform distribution of façade scattering is examined. The measured value of the scattering coefficient is found to be small and not very sensitive to the degree of surface irregularity. A progression of energy from a specular reflection field to a diffuse reflection field for successive orders of reflections is observed. It is suggested that the dominant mechanism of sound propagation for higher order reflections is via random scattering and that the development of propagation models based upon purely random scattering is a valid approach.     

Dynamics of Random One-Dimensional ±J Systems

Finite chains of a two-state random Potts spin model with periodic boundary conditions are studied within Glauber dynamics. The spin exchange is assumed random with frustration between ferro and antiferromagnetic values (±J). Time-dependent fluctuations are induced by periodic temperature oscillations. Master type differential equations for spin correlation functions are solved within linear response theory. The spectrum of relaxation times are calculated at different temperatures. The ±J Potts glass chains undergo a zero temperature phase transition. The barriers against inversion of the spin chain take only two values; 0 and 2|J|. The temperature behaviour of specific heat is characterized by rounded peaks. The frequency dependence displays two plateaus for the real part of specific heat and two corresponding peaks for the imaginary part. The dynamic specific heat is not affected by the longest relaxing mode like susceptibility. The time separation of the modes is demonstrated by the Cole-Cole plots.     

Adsorption and photocatalytic degradation of methylene blue using high surface area titanate nanotubes (TNT) synthesized via hydrothermal method

Removal of methylene blue (MB) via adsorption and photocatalysis using titanate nanotubes (TNTs) with different surface areas were investigated and compared to commercial titanium dioxide (TiO₂) P25 Degussa nanoparticles. The TNTs with surface area ranging from 20 m²/g to 200 m²/g were synthesized via hydrothermal method with different reaction times. TEM imaging confirmed the tubular structure of TNT while XRD spectra indicated all TNTs exhibited anatase crystallinity. Batch adsorption rate showed linearity with surface properties of TNTs, where materials with higher surface area showed higher adsorption rate. The highest MB adsorption (70%) was achieved by TNT24 in 60 min whereas commercial TiO₂ exhibited the lowest adsorption of only 10% after 240 min. Adsorption isotherm studies indicated that adsorption using TNT is better fitted into Langmuir adsorption isotherm than Freundlich isotherm model. Furthermore, TNT24 was able to perform up to 90% removal of MB within 120 min, demonstrating performance that is 2-fold better compared to commercial TiO₂. The high surface area and surface Bronsted acidity are the main reasons for the improvement in MB removal performance exhibited by TNT24. The improvement in surface acidity enhanced the adsorption properties of all the nanotubes prepared in this study.     

Effect of Host Medium on the Fluorescence Emission Intensity of Rhodamine B in Liquid and Solid Phase

In this work, we study the effect of concentration, host medium, PH and phase states on the fluorescence emission from the laser dye Rhodamine B pumped by UV laser as exited source. The polymethylmethacrylate PMMA is used as a host medium in case of solid phase samples while, ethanol and Tetrahydrofuran (THF) are used in case of a liquid one. Laser Induced Fluorescence (LIF) technique was used to study the fluorescence properties of both cases of liquid and thin film solid-state samples. In addition, the Dual Thermal Lens (DTL) technique was used to study the quantum yield of these samples. The concentrations of Rhodamine B in ethanol as solvent between 2 × 10⁻² M and 5 × 10⁻⁶ M were studied. The maximum fluorescence emission is observed at concentration of Rhodamine B C = 3 × 10⁻⁴ M. Comparison studies were investigated for different host medium such as ethanol, THF, PMMA in liquid phase state and PMMA in solid phase state. The measurements revealed that, the behavior of both phases state was analogous. Rhodamine B/PMMA thin film sample by ratio of 4:1 and thickness 0.12 mm was found to have the best photostability sample with a quantum yield about ≈0.82.     

Hydrogenic impurity in a quantum dot: Comparison between the variational and strong perturbation methods

A comparison is given between the variational and strong perturbation techniques. It has been shown that the variational method gives, in general, better results. Also, a new formulation is presented for the strong perturbation technique that depends on a simpler equivalent form of the perturbed part of the Hamiltonian. Moreover, common expressions which are valid for both treatments have been obtained. The results are applied to calculate the binding energy for a hydrogenic impurity placed in a finite confining potential spherical quantum dot in the states (1s), (2p) and (2s). The results obtained hitherto for a central impurity by using the strong perturbation technique are deduced in a much simpler way. As regards the off-central impurity some new expressions have been derived in both treatments. The numerical results for the two states (1s) and (2p) have also been investigated.