An Ab Initio Study and NBO Analysis of the Stability and Conformational Properties of Hexakis(trimethylelementhyl)benzene (Element = C,Si, Ge,and Sn)

Ab initio molecular orbital and density functional theory were used to investigate energetic and structural properties of the various conformations of hexa-tertbutylbenzene (1), hexakis(trimethylsilyl)benzene (2), hexakis (trimethylgermyl)benzene (3), and hexakis(trimethylstannyl)benzene (4). HF/3-21G//HF/3-21G and B3LYP/3-21G//HF/3-21G results revealed that the Twist-Boat (TB) conformer of compound 1 is more stable than the 1-Chair (C), 1-Boat (B), and 1-Planar (P) conformers. B3LYP/3-21G//HF/3-21G results show that the 1- TB conformer is more stable than 1- C, 1- B, and 1- P conformers of about 1.13, 4.34, and 99.94 kcal mol^?1 , respectively. Contrary to the stability order of compound 1 conformers, the C conformer of compounds 2–4 is more stable than TB, B, and P conformations, as calculated by B3LYP/3-21G//HF/3-21G and HF/3-21G//HF/3-21G levels of theory. The energy gap between the C and P conformers in compounds 1–4 is decreased in the following order: ΔE(4: C, P) < ΔE (3: C, P) < ΔE(2: C, P) < ΔE (1: C, P). This fact can be explained in terms of the increase of C _aromatic -M (M═C, Si, Ge, and Sn) bond lengths and the decrease of steric (van der Waals) repulsions in the previously discussed compounds. For compounds 1–3, the calculations were also performed at the B3LYP/ 6-31G*//HF/3-21G level of theory. However, the comparison showed that the results at B3LYP/3-21G//HF/3-21G methods correlated well with those obtained at the B3LYP/6-31G*// HF/6-31G method. Further, NBO analysis revealed that in compounds 1–4, the resonance energy associated with the σ_M-C1 to σ*_C2-C3 delocalization is 5.20, 9.68, 11.15, and 12.27 kcal mol^?1, respectively. These resonance energy values could explain the easiness of the ring flipping processes of C, B, and TB conformers of compounds 4 to 1. Also, the NBO results showed that by an increase of the σ_M-C1 → σ *_C2-C3 resonance energies in compounds 1–4, the σ_M-C1 bonding orbital occupancies decrease. This fact could fairly explain the increase of the C_aryl-M bond length from compound 1 to 4. The NBO results are also in good agreement with the calculated energy barriers for the ring flipping of the chair conformations in compounds 1–4, as calculated by B3LYP and HF methods.     

A Simple and Highly Efficient One-Pot Procedure for the Synthesis of Amides via Beckmann Rearrangements Using 1-Tosylimidazole (TsIm)

A facile and highly efficient method for one-pot Beckmann rearrangement of ketoximes into N-substituted amides using N-(p-toluenesulfonyl)imidazole (TsIm) is described. In this method, ketoximes are refluxed with TsIm and Cs₂CO₃ in the presence of SiO₂ as a recyclable catalyst in DMF affording the corresponding amides in high yields. This methodology is highly efficient and regioselective for various structurally diverse ketoximes including symmetrical and unsymmetrical as well as cyclic oximes. The results of quantum mechanical studies used to rationalize the experimental outcomes are discussed.     

Synthesis of Heterocyclic Pentavalent Phosphorus Compounds from Phosphite Derivatives and Indane-1,2,3-Trione

Reaction of trialkylphosphite derivatives with indane-1,2,3-trione proceeds smoothly at room temperature to afford the corresponding heterocyclic pentavalent [P(V)] phosphorus compounds via an intermolecular [4+1] cycloaddition reaction in excellent yields under solvent-free conditions. We also used dimethylphosphite and diethylphosphite instead of trialkylphosphites in this reaction, but the corresponding pentavalent phosphorus compounds were not isolated, and in both cases phosphate derivatives were obtained. The structures of the products were deduced from their IR, ¹H NMR, ¹³C NMR, and ³¹P NMR spectra, and mass spectrometry.     

Synthesis and Characterization of Organosoluble Poly(imide-ether)s with Bulky 2,3-Diaryl Imidazole Moiety: Study Physical,Thermal and Optical Properties

Two new symmetrical diamines were designed and synthesized having different functional groups such as a pair of phenyl ether linkages, 2,3-diaryl substituted imidazole rings and CF₃ groups as pendant, and characterized by FT-IR, ¹H and ¹³C-NMR spectroscopy and elemental analysis. A series of new fluorescent poly(imide-ether)s (PIEs) was prepared by polymerization of the diamines with commercial tetracarboxylic dianhydrides such as pyromellitic dianhydride and 3,3′,4,4′-benzophenone tetracarboxylic dianhydride. The resulting PIEs were amorphous and had intrinsic viscosity [η] in the range of 0.42–0.51 dL/g. The weight average molecular weights (Mw) of these polymers were measured by GPC and were in the range of 28658–35595 g/mol with molecular weight distribution (MWD) of 2.12–2.27. These polymers were readily soluble in a variety of organic solvents and formed low-colored and flexible thin films with cut-off wavelength (λ₀) in the range of 385–420 nm, and all PIEs films exhibited high optical transparency. They also possessed good thermal stability with 10% weight loss temperatures (T_10%) in the range 486–537°C in N₂. The glass transition temperatures (T_g) of PIEs are in the range 251–324°C. These polymers showed fluorescence emission in film and in solution at 459–476 nm with the quantum yields in the range 4–12%.     

Thermoanalytical study of linkage isomerism in coordination compounds

The non-isothermal differential scanning calorimetry (DSC) experiments revealed that linkage isomerization of both pure trans-[Co(en)₂(ONO)₂]PF₆ (dinitrito isomer) and trans-[Co(en)₂(NO₂)₂]PF₆ (dinitro isomer) occurs in the solid state at elevated temperatures. The process was found to be exothermic for the dinitrito isomer and endothermic for dinitro isomer. The pure isomers could be considered to be in metastable states at ambient temperatures which would be converted to an equilibrium mixture of both isomers (stable state) upon heating. Since the isomerization of both isomers may be described as a two stages process, the corresponding DSC peaks have been resolved into two peaks by means of nonlinear curve fitting tools of PeakFit^® software. The resolution of the peaks helped us to determine enthalpy changes of stepwise isomerization of both isomers. A first-order initial rate and Kissinger methods have been employed to estimate kinetic parameters of the stepwise isomerization reactions. The Kissinger method provided more reliable kinetic results. The high activation energy and positive entropy changes of isomerization of both isomers are considered as indication of a dissociative mechanism in solid state.     

Efficient imidazolium salts for palladium-catalyzed Mizoroki-Heck and Suzuki-Miyaura cross-coupling reactions

The system, Pd(OAc)2/imidazolium salts (L2), was found as an efficient catalyst in the Heck coupling reaction of olefins with aryl halides and Suzuki reactions of various aryl halides with aryl boronic acids under aerobic condition. This catalytic system demonstrates great tolerance to a wide range of groups on all substrates of aryl halides, alkenes and aryl boronic acids.     

Identification of PET radiometabolites by cytochrome P450, UHPLC/Q-ToF-MS and fast radio-LC: applied to the PET radioligands [11C]flumazenil, [18F]FE-PE2I, and [11C]PBR28

A general method is presented for the identification of radiometabolites in plasma of human and monkey subjects after administration of positron emission tomography (PET) radioligands. The radiometabolites are first produced in vitro, using liver microsomes, subsequently separated using fast radio-liquid chromatography (radio-LC), and individually collected and identified by ultra high-performance liquid chromatography/quadrupole-time of flight-mass spectrometry in MS and MS^E mode. Fast radio-LC provided superior resolution compared to conventional radio-LC, resulting in separation of a greater number of metabolites. The radiometabolites produced in vivo are then compared to and identified based on the in vitro results. This approach was applied to three PET radioligands, [¹¹C]flumazenil, [¹⁸F]FE-PE2I, and [¹¹C]PBR28, resulting in the identification of five, two, and one radiometabolites, respectively. This procedure can easily be adopted to identify the radiometabolites produced in vivo from a variety of PET radioligands.     

Doped Nano‐Sized Copper(I) Oxide (Cu2O) on Melamine?Formaldehyde Resin: a Highly Efficient Heterogeneous Nano Catalyst for ‘Click’ Synthesis of Some Novel 1H‐1,2,3‐Triazole Derivatives Having Antibacterial Activity

A facile and simple protocol for the 1,3‐dipolar cycloaddition of organic azides with terminal alkynes catalyzed by doped nano‐sized Cu₂O on melamine? formaldehyde resin (nano‐Cu₂O? MFR) as a new and convenient heterogeneous catalyst is described. In this method, ‘click’ cycloaddition of various structurally diverse β‐azido alcohols and alkynes in the presence of nano‐Cu₂O? MFR in H₂O/THF 1 : 2 furnished the corresponding 1,4‐disubstituted 1H‐1,2,3‐triazole adducts 1a – 1o in good to excellent yields at room temperature (Scheme and Table 3). The nano‐Cu₂O? MFR was characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), inductively coupled plasma (ICP) analysis, and FT‐IR. The nano‐Cu₂O? MFR could be easily recovered and recycled from the reaction mixture and reused for many consecutive trials without significant decrease in activity (Table 4). The in vitro antibacterial activities of all synthesized compounds were tested on several Gram‐positive and/or Gram‐negative bacteria (Table 5). The results demonstrate the promising antibacterial activity for some of the synthesized compounds.