H_2S_2的构型及其异构化的量子化学研究

采用量子化学中的二阶微扰(MP2)方法,在6-311+G(3df,2p)水平上,利用Gaussian软件优化反应物,过渡态和生成物的几何结构,在相同水平上对反应物,过渡态和生成物进行了频率分析,同时完成了内禀反应坐标(IRC)分析.进而利用过渡态理论,计算了温度在300K时的H迁移异构化反应的速率常数.研究结果表明,H2S2的构型有两种,分别为:线型和分叉型,其中线型HSSH的能量较低,为稳定结构;平衡常数很小,为2.2×10-20,不利于平衡从线型向分叉型异构体转化,反之,分叉型向线型转化较容易,因此分     

Single-Photon Emission from a Single InAs Quantum Dot

Excitation power-dependent micro-photoluminescence spectra and photon-correlation measurement are used to study the optical properties and photon statistics of single InAs quantum dots. Exciton and biexciton emissions, whose photoluminescence intensities have linear and quadratic excitation power dependences, respectively, are identified. Under pulsed laser excitation, the zero time delay peak of second order correlation function corresponding to exciton emission is well suppressed, which is a clear evidence of single photon emission.     

A method to quantitatively estimate rainfall rate above water surface based on different spectra shapes generated by rainfall

A method combined with the nonlinear least-square regression to quantitatively estimate rainfall rate over water surface from the different spectrum shapes generated by rainfall in some frequency bands was presented.About 2000 min spectrum data generated by rainfall have been collected in an open-lake in Xiamen city.As a result,the spectrum shape in 15-30 kHz is fitted to log-linear law which allows classification of rain into three categories from the spectrum slope:no rain,drizzle(rainfall rate>10 mm/h)and heavy rain(rainfall rate>10 mm/h).Then,rainfall detection is made and rainfall rate is quantified in drizzle time with Logistic model in the frequency bands of 2-15 kHz,and the rainfall rate in heavy rainfall also quantified with log-linear regression.Finally,all measured spectrum data are used to calculate rainfall rate with the algorithm.The results show that the estimated rainfall rates are comparably coincident with the synchronously measured ones.The average error of accumulative rainfall per min is only l%-4%.     

Optimization of Metamorphic InGaAs Quantum Wells on GaAs Grown by Molecular Beam Epitaxy

We investigate the molecular beam epitaxy growth of metamorphic InxGal-xAs materials （x up to 0.5） on GaAs substrates systematically. Optimization of structure design and growth parameters is aimed at obtaining smooth surface and high optical qualdty. The optimized structures have an average surface roughness of 0.9-1.8 nm. It is also proven by PL measurements that the optical properties of high indium content （55%） InGaAs quantum wells are improved apparently by defect reduction technique and by introducing Sb as a surfactant. These provide us new ways for growing device quality metamorphic structures on GaAs substrates with long-wavelength emissions.     

连续激光辐照锗材料损伤的数值模拟研究

 以热传导理论和热弹应力理论为基础,建立了连续平顶激光辐照锗材料的二维非稳态物理模型。对受辐照锗材料的热-力场分布进行数值模拟,比较了激光辐照时间对靶材热-力场分布的影响,探讨了温度场及应力场空间梯度随半径的分布以及激光辐照时间对热-力场空间梯度的影响。计算结果表明,靶材中心温升效应最大,而应力最大值出现在光斑半径外侧;光斑边缘处温度场和应力场梯度绝对值均达到最大,随着辐照时间的延长,材料同一点温度场和应力场梯度均增大。在给定条件下,计算了靶材的损伤时间,应力损伤域值最先达到。     

Gain Measurement and Anomalous Decrease of Peak Gain at Long Wavelength for InAs/GaAs Quantum-Dot Lasers

Mode gain spectrum is measured by the Fourier series expansion method for InAs/GaAs quantum-dot （QD） lasers with seven stacks of QDs at different injection currents. Gain spectra with distinctive peaks are observed at the short and long wavelengths of about 1210nm and 1300nm. For a QD laser with the cavity length of 1060μm, the peak gain of the long wavelength first increases slowly or even decreases with the injection current as the peak gain of the short wavelength increases quickly, and finally increases quickly before approaching the saturated values as the injection current further increases.     

反应烧结碳化硅球面反射镜的光学加工与检测

介绍了250mm口径、4200mm曲率半径的反应烧结碳化硅球面反射镜光学加工和检测的工艺流程;并按照流程依次介绍了在研磨成型、细磨抛光和精抛光过程中使用的机床、磨具、磨料及采用的工艺参数和检测方法。介绍了在光学加工和检测各个步骤中应注意的问题。展示了加工后250mm口径反应烧结碳化硅球面反射镜的实物照片,并给出了面形精度和表面粗糙度的检测结果:面形精度(95%孔径)均方根值(RMS)为0.037波长(λ=632.8nm),表面粗糙度RMS值达到1.92nm(测量区域大小为603.6ⅹ448.4μm)。     

退火温度对KDP晶体光学均匀性的影响研究

 研究了磷酸二氢钾（KDP）晶体热退火前后光学均匀性的变化，发现适当温度下退火可以降低KDP晶体的内应力，提高晶体的消光比，从而提高晶体的光学均匀性。实验证明，50℃下退火即可消除部分内应力，110℃下退火可以消除生长鬼影和鬼线。但是,退火温度太高（如170℃）,也可能使晶体的均匀性降低。     

红外光谱法与药用玫瑰真伪的分析与鉴定

文章采用红外光谱法(FTIR)并结合二维相关光谱分析技术分析鉴定了药用玫瑰(药材对照品)及其混淆品月季和蔷薇。在一维红外光谱中三者的谱图较为一致,但药用玫瑰在1 318 cm-1波数处的峰不明显 ,而月季和蔷薇的1 318 cm-1峰明显,且较尖。在高分辨的二阶导数谱中药用玫瑰和月季分别在1 617和1 618 cm-1处具有芳香类指纹特征峰,而蔷薇的峰则在1 612 cm-1波数处,相差了5～6 cm-1。在1 044 cm-1处的峰, 蔷薇糖类化合物的指纹特征峰较明显,月季和药用玫瑰不明显。观测二维相关红外谱,三者都存在1 620,1 560和1 460 cm-1的芳香类化合物的自动峰,不同的是月季和蔷薇还存在一个较明显的1 660 cm-1的肩膀峰。药用玫瑰、月季和蔷薇在850～1 250 cm-1范围内的二维相关红外光谱差别很大,药用玫瑰1 050 cm-1的糖类化合物自动峰强度最大,而月季的峰较弱,而蔷薇没有此峰。谱图的三级鉴定验证了药用玫瑰、月季和蔷薇在糖苷类化合物和芳香类化合物的相对含量上都是不一致的。结果表明,运用红外光谱法可以快速有效地分析和鉴定药用玫瑰及其混淆品。     

Synthesis and properties of Au-Fe3O4 and Ag-Fe3O4 heterodimeric nanoparticles

Monodisperse Au-Fe 3 O 4 heterodimeric nanoparticles (NPs) were prepared by injecting precursors into a hot reaction solution.The size of Au and Fe 3 O 4 particles can be controlled by changing the injection temperature.UV-Vis spectra show that the surface plasma resonance band of Au-Fe 3 O 4 heterodimeric NPs was evidently red-shifted compared with the resonance band of Au NPs of similar size.The as-prepared heterodimeric Au-Fe 3 O 4 NPs exhibited superparamagnetic properties at room temperature.The Ag-Fe 3 O 4 heterodimeric NPs were also prepared by this synthetic method simply using AgNO 3 as precursor instead of HAuCl 4.It is indicated that the reported method can be readily extended to the synthesis of other noble metal conjugated heterodimeric NPs.