Selective Excitation of Band Extrema in Valley Photonic Crystals

Flexible control of building blocks of photonic crystals enables achieving desirable band structures. Exploration of photonic band extrema has brought many fantastic features to design artificial optical materials, such as Brillouin‐zone‐corner extrema for valley photonic materials and zone‐center extremum for zero‐index metamaterials. However, two such kinds of extrema are always found independently in different photonic crystals. In this work, a kind of valley photonic crystals possessing both zone‐center and zone‐corner band extrema almost at the same frequency is proposed. Inspired by antennas theory, a three‐antenna array (TAA) source is devoted to individually manipulate each extremum. The correlation coefficient is given to determine the coupling efficiency between the TAA source and extrema eigenmodes. By using a source with a high correlation coefficient, these extrema bulk states are selectively excited consistent with their eigenfields. Furthermore, three control cases are shown that multiple extrema points are simultaneously excited, in order to confirm the validity of the correlation coefficient. Finally, a potential application of a beam‐steering device is proposed through selective excitation of ternary extrema. This work develops binary valley states into ternary mix states, rendering more degrees of freedom for on‐chip optical information transport, particularly for beam steering and mode division multiplexing.     

Calculation of Transmitted Efficiency and Output Characteristics for Beijing Synchrotron Radiation Facility (BSRF) 3B3 Beamline

Based on the radiation characteristics of the bend magnet source, the output characteristics of the BSRF-3B3 beamline was analyzed and discussed. The result is the foundation of adjustment and diagnosis of the beamline. A calculation model is provided to analyze characteristics of beamlines attached to bend magnet sources.     

The optical properties of planar waveguides in LiB3O5 crystals formed by Cu implantation

A planar optical waveguide has been formed in a LiB₃O₅ crystal using 6.0 MeV Cu⁺-ions with a dose of 1 × 10¹⁵ ions/cm² at room temperature. Possible propagating modes were measured at a wavelength of 633 nm using the prism-coupling method. The refractive index profiles of the waveguide were reconstructed by an effective refractive index method and the beam propagation method was used to investigate the properties of the propagation modes in the formed waveguide. The results suggest that the fundamental TE₀ and TM₀ modes may be well-confined and propagate a longer distance inside the waveguide. The implantation process was also simulated using the transport of ions in matter code (TRIM), which indicates that the nuclear energy deposition may be the main factor for the refractive index change.     

上行链路大气波前畸变对剪切光束成像技术的影响

剪切光束成像（sheared-beam imaging,SBI）技术是一种利用三束剪切相干激光照明的非传统成像技术,该技术通过探测器阵列接收目标反射回波的散斑图进行计算成像,在对远距离暗弱目标高分辨率成像方面有着独特的优势.大气湍流引起的光束波前畸变是影响SBI成像质量的一个关键因素,因此本文从湍流引起的激光波前畸变对目标频谱信息提取的影响入手,建立了光束波前畸变对成像影响的理论模型.利用多层相位屏模型模拟了近地25 km大气对SBI光束传输的影响.通过计算机仿真,得到了不同激光发射孔径和不同成像距离时SBI的成像结果.仿真结果表明,选取合适的发射孔径尺寸可以有效缓解湍流对光束波前质量的影响,从而提升成像质量.在Hutchin的研究基础上,对孔径选择范围的已有研究成果进行了扩展与深化.给出了SBI系统发射孔径尺寸选取的建议,为SBI对不同高度目标成像的像质差异分析提供了参考.     

Raman spectroscopic study of ceramic Sr2Bi4Ti5O18

Raman spectra of ceramic Sr2Bi4Ti5O18 （SBTi5） are reported to consist of four different Raman bands. Temperature-dependent spectra reveal the relationship between the lattice vibration and the material＇s structure. There appears a relatively large change in structure of the material at about 273K, The anharmonic potential of the material has a great influence on its phonon mode full width at half maximum （FWHM）, which can be expressed by a function of temperature. Theoretical fittings of the FWHMs for the two modes at around 312 cm^-1 and 464cm^-1 indicate that the latter phonon mode is more anharmonic than the former one.     

Observation of four-wave mixing in caesium atoms using a noncycling transition

In this paper the generation of four-wave mixing (FWM) signal using a noncycling transition of caesium atoms is investigated when the pumping laser is locked to the transition $6{\rm S}_{1/2}F=4\to6{\rm P}_{3/2}F'=4$, and meanwhile the probe frequency is scanned across the $6{\rm S}_{1/2}F=4 \to6{\rm P}_{3/2}$ transition. The efficiency of the four-wave mixing signal as a function of the intensity of the pumping beams and the detuning of the pumping beams is also studied. In order to increase the detection efficiency, a repumping laser which is resonant with $6{\rm S}_{1/2} F=3\to 6{\rm P}_{3/2}F'=4$ transition is used. A theoretical model is also introduced, and the theoretical results are in qualitative agreement with experimental ones.     

飞秒激光脉冲作用下氧化镁的烧蚀及其超快动力学过程

研究了双面抛光氧化镁单晶（111）表面800 nm飞秒激光单脉冲烧蚀阈值和激光脉宽的依赖关系.利用泵浦-探针技术,测量不同能量和脉宽作用下飞秒激光烧蚀的时间分辨反射率的演化.通过扫描电镜观察其烧蚀形貌,发现大量的沿氧化镁［100］晶向开裂的裂纹.讨论了表面裂纹的形成机理,并解释了飞秒激光烧蚀氧化镁的超快动力学过程.     

范德堡方法在ZnO薄膜测试中的应用

近年来,随着对宽禁带半导体材料,氧化锌薄膜研究的快速发展,对其电学性质的研究也显得尤为重要。主要介绍范德堡方法在ZnO薄膜电学性质测量中的应用,并对初步测量结果作简要的讨论。     

退火温度对KDP晶体光学均匀性的影响研究

 研究了磷酸二氢钾（KDP）晶体热退火前后光学均匀性的变化，发现适当温度下退火可以降低KDP晶体的内应力，提高晶体的消光比，从而提高晶体的光学均匀性。实验证明，50℃下退火即可消除部分内应力，110℃下退火可以消除生长鬼影和鬼线。但是,退火温度太高（如170℃）,也可能使晶体的均匀性降低。