碳纳米管上原位沉积钯-钴-镍纳米颗粒及其对乙醇氧化的电活性

以水合肼为还原剂,在水和乙醇的混合溶液中制备多壁碳纳米管(MWCNT)负载的纳米镍(Ni/MWCNT)和纳米镍钴(Ni-Co/MWCNT)颗粒,然后将它们分别与氯化钯溶液反应,形成的钯纳米颗粒原位沉积在MWCNT表面,从而得到MWCNT负载的Pd-Ni/MWCNT和Pd-Ni-Co/MWCNT催化剂。SEM和TEM图像显示,MWCNT上的催化剂颗粒是由5~10 nm的小颗粒团聚而成的30~100 nm的大颗粒,三金属催化剂的粒径比双金属的粒径小,在MWCNT上的分散度更高。ICP和EDS分析显示,Pd直接还原并包覆在纳米镍和纳米镍钴表面;采用循环伏安和计时电流技术,研究了催化剂在碱性溶液中对乙醇氧化的电催化活性,结果表明,Pd-Ni-Co/MWCNT催化剂对乙醇氧化具有强的电催化活性,乙醇氧化对应的峰电流密度达101.8 mA·cm^-2,并且催化剂催化活性稳定。     

3，5-二硝基苯甲酸镉配合物的合成、晶体结构、热稳定性和荧光性质

以3,5-二硝基苯甲酸,咪唑为配体,合成了新化合物[Cd(H₂O)₂(DNBA)(Im)₂](DNBA)·H₂O,(DNBA=3,5-二硝基苯甲酸阴离子)。该配合物属正交晶系,空间群为Ccc2,晶胞参数：a=1.324 99(4) nm,b=1.516 01(5) nm,c=2.789 22(8) nm;V=5.602 7(3) nm³,D_c=1.719 g·cm^-3,Z=8,μ=0.866 mm^-1,F(000)=2 912,最终偏离因子R₁=0.058 3,wR₂=0.146 4。该配合物中包含两个单核镉(Ⅱ)配合物,且配合物中还包含未配位的3,5-二硝基苯甲酸,金属中心均是六配位变形八面体结构。并测定和研究了标题化合物的热重和荧光性能。     

Enrichment of neonicotinoid insecticides from lemon juice sample with magnetic three‐dimensional graphene as the adsorbent followed by determination with high‐performance liquid chromatography

A novel 3D‐graphene (3D‐G) magnetic nanomaterial was prepared and used as an adsorbent for the extraction of four neonicotinoid insecticides (acetamiprid, imidacloprid, thiacloprid, and thiamethoxam) from lemon juice sample. Then, HPLC with UV detection was applied for the determination of the neonicotinoid insecticides desorbed from the 3D‐G magnetic nanomaterial. The main experimental parameters that affect the extraction efficiencies such as the amount of 3D‐G magnetic nanomaterial, sample solution pH, extraction time, salting‐out effect, and desorption conditions were studied and optimized. As a result, the linear concentration range of the method was from 0.3 to 100.0 ng/mL for thiacloprid, from 0.5 to 100.0 ng/mL for imidacloprid and acetamiprid, and from 1.0 to 100.0 ng/mL for thiamethoxam, with correlation coefficients of 0.9965–0.9985, respectively. The LODs of the method based on an S/N of 3 were between 0.08 and 0.2 ng/mL. The enrichment factors obtained were between 67 and 427, and the RSDs (n = 6) were in the range from 4.6 to 7.1%, and the recoveries of the method fell in the range of 88.75 to 111.60%.     

Extraction of coal-tar pitch using NMP/ILs mixed solvents

Coal-tar pitch(CP)is a promising carbon raw material for producing needle coke,carbon fiber etc.During processing,the H/C ratio,ash content,and quinoline insoluble(QI)in the CP are the key factors that influence the material preparation.In this study,NMP was selected to extract CP first;then[BMIM]Cl/NMP mixed solvent was used;and finally a series of ionic liquids(ILs)mixtures with NMP were developed for the extraction of CP to obtain the refined pitch.The extracts were analyzed via elemental analysis,TGA,FT-IR,and 13C-NMR.Results indicate that different NMP/IL mass ratios or different kinds of ILs have impact on the extraction yield.The relationship of the hydrogen to carbon(H/C)ratio changed with different solvents and QI extracts were obtained.Results showed that the H/C ratios changed little between NMP extracts and could be adjusted by changing the NMP/ILs mass ratio or using different ILs.The extracts are suitable for preparation mesophase pitch because of no ash content,low QI,and appropriate H/C ratios.As a result,NMP can be used to refine pitch.In addition,[BMIM]Cl is good mixed with NMP for CP extraction,because it can obtain a relatively high yield under the same extraction conditions.     

Ru掺杂对Fe催化剂上酚类化合物加氢脱氧影响的密度泛函理论研究北大核心CSCD

采用密度泛函理论(DFT)计算研究了苯酚、邻甲酚、愈创木酚在不同结构Ru-Fe(211)表面上吸附活化性能和加氢脱氧反应路径.结果表明,Ru掺杂能促进H2分子在Fe(211)表面上解离,提高加氢脱氧反应速率.酚类在1Ru_(ads)-Fe(211)表面上吸附比在1Ru_(sub)-Fe(211)表面上更稳定,苯酚和邻甲酚脱羟基步骤能垒分别降低0.13和0.28 eV,有利于生成芳烃.愈创木酚在1Ru_(sub)-Fe(211)表面上加氢脱氧优势路径是先脱甲氧基生成苯酚,苯酚再加氢脱氧生成产物苯(速控步骤能垒1.16 eV);而在1Ru_(ads)-Fe(211)表面上愈创木酚先脱羟基再脱甲基生成苯酚的路径更具有动力学优势(速控步骤能垒1.21 eV).计算结果表明Ru掺杂方式影响Fe催化剂对酚反应分子的吸附稳定性以及加氢脱氧反应路径和性能.与1Ru掺杂Fe(211)催化剂相比,增加Ru原子数形成4Ru_(ads)-Fe(211),能够进一步提高酚类反应物的吸附强度,但导致加氢脱氧反应能垒升高.因此,在Fe催化剂上以表面吸附的形式掺杂少量贵金属Ru更利于酚类加氢脱氧生成芳烃.     

掺杂PbSe/PVA量子点的光致聚合物全息特性

通过原位合成法以聚乙烯醇辅助合成了6.5nm、10nm和15nm的PbSe量子点,研究了掺杂PbSe量子点的光致聚合物的全息特性.将三种尺寸的PbSe量子点按不同浓度分别掺入光致聚合物中,制成无机-有机复合型光致聚合物膜,并对其全息性能进行研究.复合聚合物膜的UV-Vis吸收光谱表明掺入的PbSe量子点并未与聚合物中的有机组分发生化学反应.采用氩氪离子激光器输出的647nm红光研究了复合聚合物膜的透过率和全息记录光栅的布喇格偏移与衍射效率.透过率曲线表明PbSe量子点在复合聚合物膜中分散良好,膜表面均匀.由于PbSe量子点在聚合物链中起支撑作用,复合聚合物膜在全息记录过程中不易发生形变,从而增加了聚合物膜的抗缩皱能力.衍射效率曲线表明掺入PbSe量子点的复合聚合物膜的衍射效率比未掺杂的有所提高.此外,体系存在一个最优值,当掺入平均粒径为10nm且浓度为3.6×10-6 mol/L的PbSe量子点时,样品的透过率达到84%,衍射效率从67.2%提升到89.7%,缩皱率降低到0.8%,极大提高了材料的全息性能.     

行波光电二极管级联阵列输出功率合成研究

针对未来光载无线通信所需的高功率、大带宽的光电探测器,提出了一种行波光电二极管级联阵列功率合成电路.先将行波光电二极管级联,再按照阵列式结构将多组级联的光电二极管组合起来,实现射频功率合成,以获得高功率、大带宽的射频信号.采用EDA工具,对该光电转换射频功率合成电路进行仿真模拟.仿真结果表明,该功率合成电路可以有效地将各光电二极管的射频输出信号进行功率合成,功率合成后的信号带宽显著增加,仿真结果与理论分析完全一致.此外,电路分析表明,增加该功率合成电路中的高阻微带线的特性阻抗可以有效提高其输出射频信号的带宽.     

含平面手性和中心手性双手性因素化合物的合成及应用

[2,2]对二环苯经甲酰化、缩合、拆分得到（Rp）-4-甲酰基[2,2]对二环苯,再与L-亮氨酸的衍生物二齿手性氨基醇经缩合、还原得到由平面手性和中心手性因素构建的化合物（Rp,S）-1,1-二苯基-2-{[2,2]对二环苯基-甲氨基}-4-甲基戊醇.产物结构经IR、MS和1H NMR等进行了表征.用1H NMR考察了其作为主体对客体手性羧酸衍生物消旋体的手性识别能力.     

R-兰索拉唑的合成新方法

2-氯甲基-3-甲基-4-（2,2,2-三氟乙氧基）吡啶盐酸盐和2-巯基苯并咪唑经缩合反应得到兰索拉唑硫醚;以L-亮氨酸经结构修饰得到的二齿手性氨基醇为催化剂、叔丁基过氧化氢为氧化剂,不对称氧化兰索拉唑硫醚得到R-兰索拉唑粗品。经分离纯化得到产物,e.e.值99.5%,两步反应总收率43.3%。产物经IR、MS、^1H-NMR、手性HPLC确证。