Hollow-glass-microsphere-based Biphenyl Epoxy Resin Composite with Low Dielectric Contant

In this study, rigid 4,4'-diglycidyl(3,3',5,5'-tetramethylbiphenyl) epoxy(TMBP)-based composites were developed by the incorporation of varying percentages of commercial hollow glass microspheres(HGMs, QH-450) into the TMBP resin used for electronic packaging. The thermal and mechanical properties as well as the morphology of all the composites were characterized, and dielectric properties were characterized by advanced analytical techniques. The results reveal that a series of TMBP/QH-450 composites exhibits higher initial degradation temperatures(T_d,5%>300℃), and the residual char and glass transition temperature were clearly improved with QH-450 loading. In addition, all epoxy composites exhibited a lower dielectric constant ranging from 3.74 to 3.06 at 1.2 MHz because the lower dielectric properties of the inert gas used as the core of the QH-450 decreased molecule polarity. Hence, this developed TMBP/QH450 system demonstrates potential applications in electronic packaging.     

Cu-ZnO-CeO2催化剂组成对CO2加H2合成甲醇性能的影响

采用并流沉淀法分别制备了CuO-CeO₂（物质的量比为5：1）、CuO-ZnO（物质的量比为5：4）、CuO-ZnO-CeO₂（物质的量比为5：4：1）三组目标催化剂,通过X射线衍射（XRD）、氢气升温还原（H₂-TPR）、CO₂程序升温脱附（CO₂-TPD）、氮气吸附-脱附、X射线光电子能谱（XPS）、N₂O滴定表征技术对催化剂的物化性能进行了测试,并在高温高压微催化反应器中对催化剂进行活性评价。研究了CuO-ZnO-CeO₂组成对CO₂加氢合成甲醇的影响。结果表明,与二组分催化剂相比较,三组分CuO-ZnO-CeO₂催化剂物化性能及催化活性发生了很大变化,催化剂表面碱性位增强,热稳定性增强,CuO颗粒粒径变小,铜分散度以及氧空位浓度提高,最终催化活性显著提高。其中,CuO-ZnO-CeO₂催化剂中,CuO颗粒粒径为8.2nm,铜的比表面积为68.4m²/g,铜分散度为7.19%,甲醇的选择性和收率分别为48.6%和0.057mmol/（g·min）,催化剂活性较好。     

三维开放骨架镧系金属有机配位聚合物Tm(BTC)(DMF)(DMSO)的合成、结构和性质

以稀土元素铥(Tm) 作为金属中心, 均苯三甲酸(H3BTC)作为有机配体制备了一个新型的三维配位聚合物 Tm(BTC)(DMF)(DMSO), 并通过X射线单晶衍射、元素分析、热重分析、吸附测试等手段对其进行了表征.     

聚烯烃共混物注射制品的形态控制与多层次结构

从注射制品形态控制和结构表征的角度探讨高分子材料加工-形态-性能之间的关系.研究中采用动态保压成型方法来制备注射样品,在注射成型过程中引入剪切应力场的作用,制得的样品表现出明显的多层次结构,从外向里分别为皮层、剪切层、芯层,表现出不同的相形态、结晶形貌以及取向行为.研究发现,剪切应力对聚烯烃的形态发展和结构变化具有重要影响.在剪切应力的作用下,聚烯烃共混物中分散相会发生变形、取向,从而导致共混物的相转变点发生移动;结晶形态从球晶转变为shish-kebab结构;聚烯烃共混物在高剪切应力下相容,低剪切下发生相分离;HDPE/PP共混物的注射制品中出现附生结晶等现象.     

Preparation of Anion Exchange Membrane Based on Imidazolium Functionalized Poly(arylene ether ketone)

The authors presented a novel synthetic route for the imidazolium functionalized poly(arylene ether ketone)s, derived from an engineering plastics polymer, a poly(arylene ether ketone) with 3,3',5,5'-tetramethyl-4,4'-dihydroxybiphenyl moiety(PAEK-TM). The preparation of anion exchange membranes comprised converting benzylic methyl groups to bromomethyl groups by a radical reaction, followed by the functionalization of bromomethylated PAEK with alkyl imidazoles, i.e., methyl, butyl or vinyl imidazole. The structure of imidazolium functionalized PAEK was proved by ¹H NMR spectra. A class of flexible and tough membranes was then achieved by subsequent film-forming and anion exchange processes. The water uptake and hydroxide conductivities of membranes are comparable or superior to those of quaternary ammonium(QA) anion exchange membranes. This work demonstrated a new route for non-QA anion exchange membrane design, avoiding the chloromethylation reagent and precisely controlling the degree and location of imidazolium groups.     

Structure correlations of water molecules in a concentrated aqueous solution of ethanol

Monte Carlo calculation results for water–ethanol mixtures calculated in the isothermal and isobaric ensemble at T=300 K are presented. The analysis of the radial distribution functions for hydrogen bonding between ethanol molecule and water molecules was done. The concentrations of ethanol 0.75 show characteristics features of hydrogen-bonded liquids. The influence of the polar solvent molecule on water local structure and the hydrogen bond nets ware analyzed. Radial distribution functions for water–water interactions calculated in pure water and water–ethanol system are compared.     

OMS-2/Al2O3/堇青石整体式催化剂的制备及其催化性能研究

以Al₂O₃/堇青石蜂窝陶瓷为载体,氧化锰八面体分子筛(OMS-2)为活性组分,采用涂覆法制备了系列整体式催化剂。考察了黏合剂种类和活性组分涂覆次数对二甲醚(DME)催化燃烧性能的影响,并对催化剂进行XRD、BET、SEM、H₂-TPR、O₂-TPD等表征。结果表明,以甲氧基聚乙二醇为黏合剂经一次涂覆制备的整体式催化剂的性能最佳,活性组分OMS-2以相互交织的簇体均匀分布在载体上,并与Al₂O₃之间存在较强的相互作用。涂层的添加有效增加了催化剂的比表面积,提高了催化剂的性能,最佳催化活性t₉₀为257 ℃。     

溅射气压对碳硅氧薄膜透过率及光学带隙的影响

采用射频磁控溅射技术在玻璃基底和单晶硅片(100)上制备了碳硅氧(SiOC)薄膜,通过扫描电镜、X射线衍射、拉曼光谱、X射线光电子能谱及紫外可见透射光谱等技术手段对其进行了分析,研究了在不同溅射气压下所制备薄膜的组分、透过率及光学带隙.结果表明:随着溅射气压的增大,薄膜内部sp3键含量、透过率及光学带隙均随之增大,sp3键及其形成的宽带隙σ键对薄膜光学带隙有着较大影响.在溅射气压为3.0 Pa的条件下,薄膜光学带隙为2.67 eV.     

First measurement of the rho spectral function in high-energy nuclear collisions

We report on a precision measurement of low-mass muon pairs in 158 AGeV indium-indium collisions at the CERN SPS. A significant excess of pairs is observed above the yield expected from neutral meson decays. The unprecedented sample size of 360,000 dimuons and the good mass resolution of about 2% allow us to isolate the excess by subtraction of the decay sources. The shape of the resulting mass spectrum is consistent with a dominant contribution from pi+pi- -->rho -->mu+mu- annihilation. The associated space-time averaged spectral function shows a strong broadening, but essentially no shift in mass. This may rule out theoretical models linking hadron masses directly to the chiral condensate.