Influence of Cd and Cr substitutions on the magnetization and permeability of magnesium ferrites

Magnetization and permeability of polycrystalline ferrites with general formula Cd_xMg_1−xFe_2−yCr_yO₄ (x=0, 0.2, 0.4, 0.6, 0.8, 1.0; y=0, 0.05 and 0.10) were studied. Study of saturation magnetization reveals that the Neel's two-sublattice model exists upto x=0.4, for y=0, 0.05 and 0.1 and a three-sublattice model (YK-model) is predominant for x>0.4 and y=0, 0.05 and 0.10. The saturation magnetization and magnetic moment were found to decrease with the increase in Cr³⁺ contents, which is attributed to the dilution of B–B site interaction. Variation of initial permeability with temperature revealed the long-range ferromagnetic ordering in the compounds with x=0.4. The sample with x?0.4 and y=0, 0.05 and 0.10 showed peaking behavior near Curie temperature, which is attributed to the decrease of anisotropy constant K₁ to zero. Low-frequency dispersion of initial permeability suggests domain wall displacement. Addition of Cd²⁺ resulted in a sharp decrease in Curie temperature. With the addition of Cr³⁺, initial permeability was found to decrease.     

Influence of oxidation time on semiconductive behaviour of thermally grown oxide films on AISI 304L

The oxide films formed on AISI 304L stainless steel at 300 °C in the oxidation time range between 2 and 4 h have been studied by photoelectrochemistry. Photocurrents were investigated as a function of the wavelength of the incident light and the electrode potential. The investigation allowed the determination of the semiconductive properties of the oxides. The oxide films showed n-type behaviour. A duplex structure of the oxide films has been suggested on the basis of the photocurrent spectra, with an internal oxide layer having an optical gap (E_g2 = 2.16-2.3 eV) depending on the applied potential and oxidation time, higher to that of the external oxide layer (E_g1 ≈ 1.9 eV). Significant variations in the amplitude of the photocurrent were detected as a function of the applied potential and the oxidation time.     

Large-mass and high-temperature behaviour in perturbative quantum field theory

Bounds for large-mass behaviour in renormalized perturbation expansions at zero temperature, which were previously obtained by Manoukian and Caswell-Kennedy in momentum space, are rederived in the parametric representation. A very simple unified proof of the BPHZ theorem and the decoupling theorem is also given. A new technique for asymptotic analysis, based on a generalized Kontorovich-Lebedev integral transform, is introduced. This method is applied to find the leading high-temperature behaviour of perturbative field theories in the imaginary-time formalism. We prove that diagrams containing nonstatic modes, which at high temperature behave like particles with a large mass, are suppressed relative to purely static diagrams. This rigorously proves a limited form of dimensional reduction at infinite temperature.     

Controlling a bunch of multiple filaments by means of a beam diameter

We demonstrate a three orders of magnitude increase and stability in the backscattered fluorescence signal from nitrogen molecules by terawatt femtosecond laser pulse induced air filaments using a new method. The method is based on squeezing the initial beam diameter using a telescope. The effect of laser shot-to-shot fluctuations was included in numerical simulations by a random distribution of the initial intensity in both squeezed and non-squeezed beams. Statistical processing of the simulation results shows that the average diameter of plasma channels as well as the total amount of free electrons generated in a bunch of multiple filaments in air is larger in the squeezed beam. Shot-to-shot stability of the simulated plasma density increases in the squeezed beam. The change of this plasma density with propagation distance is in good qualitative agreement with the change of the range-corrected nitrogen fluorescence signal with distance. PACS 42.65.Jx; 42.60.Jf; 42.68.Ay; 42.68.Wt     

Electron beam induced modification of poly(ethylene terephthalate) films

Electron beam processing of poly(ethylene terephthalate) (PET) films is found to promote significant changes in the melting heat, intrinsic viscosity and polymer film-liquid (water, isooctane and toluene) boundary surface tension. These properties are featured with several maximums depending on the absorbed dose and correlating with the modification of PET surface functionality. Studies using adsorption of acid-base indicators and IR-spectroscopy revealed that the increase of PET surface hydrophilicity is determined by the oxidation of methylene and methyne groups. Electron beam treatment of PET films on the surface of N-vinylpyrrolidone aqueous solution provided graft copolymerization with this comonomer at optimum process parameters (energy 700 keV, current 1 mA, absorbed dose 50 kGy).     

Annealing effect on soft magnetic properties and magnetoimpedance of Finemet Fe73.5Si13.5B9Nb3Au1 alloy

Effect of annealing on the soft magnetic properties of Fe_73.5Si_13.5B₉Nb₃Au₁ amorphous ribbon has been investigated by means of structure examination, magnetoimpedance ratio (MIR) and incremental permeability ratio (PR) spectra measured in the frequency range of 1–10 MHz at a fixed current of 10 mA X-ray diffraction analysis showed that the as-cast sample was amorphous and it became nanocrystalline under a proper heat treatment. When annealing amorphous alloy at 530 °C for 30, 60, 90 min, soft magnetic properties have been improved drastically. Among the samples investigated, the sample annealed at 530 °C for 90 min showed the softest magnetic behavior. The MIR and PR curves revealed the desirable changes in anisotropy field depending upon annealing.     

Electronic structure of Ti metal and TiO2 powder studied by hard and soft (Cu Kα1 and Al Kα1) X-ray photoelectron and Auger spectroscopy

High-energy X-ray photoelectron spectroscopy (XPS) is of particular importance for minimizing the effects of surface contamination by increasing photoelectron escape depths. In this study high-resolution high-energy Cu Kα₁ and soft Al Kα₁ XPS and Auger electron spectroscopy were used to compare the electronic structure of Ti in TiO₂ powder and Ti metal. The Ti 1s in TiO₂ XPS line is narrower and more symmetric than in Ti metal. A comparison of the relative intensities of the L₂₃M₂₃M₄₅ and L₂₃M₂₃M₂₃ Auger transitions in Ti metal and TiO₂ is consistent with the expected transfer of Ti 3d electrons away from the Ti site in the oxide. The satellites accompanying the Ti 1s XPS line excited by Cu Kα₁ X-rays occur at the same energies as the satellites accompanying the Ti 2s and 2p XPS lines excited by Al Kα₁ X-rays indicating that they do not depend on the core-level, the experimental resolution or inelastic scattering processes.     

OR and the challenge to improve the NHS: modelling for insight and improvement in in-patient flows

This paper considers efforts to improve in-patient flows, a particularly urgent issue in the National Health Service (NHS). The context is described and related to reasons why OR has been making relatively little contribution. The paper argues that large complex models may often be unnecessary and even get in the way of providing clear insight and guidance for problem owners. The importance of understanding the generic working of systems to lead to improvement, and the limitations of simply describing them, is stressed. It is demonstrated that some very simple models can be of significant practical value in understanding and managing complex systems, changing mindsets and driving collection and use of operationally valuable data. Recommendations for more effective engagement with the NHS are offered.     

Characteristics of radionuclide contamination of different zones of Semipalatinsk Nuclear Test Site “Opytnoe pole”

Data on the spatial distribution of radionuclides (²⁴¹Am, ²³⁹Pu, ¹³⁷Cs and ¹⁵²Eu) formed during nuclear explosions of different types near P2 SNTS test site are presented. Radionuclide contamination induced by the explosions varies in the concentrations of individual radionuclides, their proportions and species. Examination of the variations is a crucial task to plan remediation activities as well as those aimed at decrease of radiation risk for population and prevention of repeated contamination. Concentrations of ²⁴¹Am and ^239+240Pu that are the most toxic radionuclides in the area lie in hundred thousands of Bqkg^?1. The most contaminated areas are classified by the radionuclide concentration, ratio and form present in soil.