Magnetometer based on a pair of symmetric transitions in the 87Rb hyperfine structure

A new version of the fast optically pumped magnetometer, an optically pumped balanced quantum magnetometer, built around a pair of symmetric transitions in the hyperfine structure of the ⁸⁷Rb ground state is implemented for the first time. The noise-limited sensitivity of the prototype in terms of the variance is 6 pT for a measurement time of 0.1 s. The basic advantages of the new magnetometer are the absence of dead zones when it changes orientation relative to the magnetic field and an extremely low sensitivity to the drift of pumping parameters.     

Entropy production as a regularization factor in solving an inverse diffusion problem

Inverse diffusion problems allow the diffusion coefficients to be determined from experimental concentration profiles. Solutions of the inverse diffusion problem are unstable toward perturbations of the initial concentration profiles. By the example of inverse diffusion problem solution for a model binary system it is demonstrated that the use of the production entropy to minimize the discrepancy functional stabilizes the solution even for significant perturbations of the initial concentration profile. The choice of the entropy production for the smoothing component of the discrepancy functional is physically adequate to the formulated problem, and the entropy production can be used to solve inverse problems of heat and mass transfer. __________ Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 6, pp. 79–83, June, 2006.     

An improved algorithm for decomposing arc flows into multipath flows

We consider a multipath maximum flow problem introduced by Kishimoto (Networks 27(4)(1996)279-291). The focus is on efficient transformation from arc flows into multipath flows, where a multipath flow is a nonnegative combination of multipaths. A new algorithm that is more efficient than existing ones is proposed for the transformation.     

Relation between frobenius and 2-frobenius groups with order components of finite groups

IfG is a finite group, we define its prime graph Г(G), as follows: its vertices are the primes dividing the order ofG and two verticesp, q are joined by an edge, if there is an element inG of orderpq. We denote the set of all the connected components of the graph Г(G) by T(G)= {π_i(G), fori = 1,2, …,t(G)}, where t(G) is the number of connected components of Г(G). We also denote by π(n) the set of all primes dividingn, wheren is a natural number. Then ¦G¦ can be expressed as a product of m₁, m₂, …, m_t(G), where m_i’s are positive integers with π(m_i) = π_i. Thesem _i ’s are called the order components ofG. LetOC(G) := {m ₁,m ₂, …,m _t (G)} be the set of order components ofG. In this paper we prove that, if G is a finite group andOC(G) =OC(M), where M is a finite simple group witht(M) ≥ 2, thenG is neither Frobenius nor 2-Frobenius.     

Electron beam induced modification of poly(ethylene terephthalate) films

Electron beam processing of poly(ethylene terephthalate) (PET) films is found to promote significant changes in the melting heat, intrinsic viscosity and polymer film-liquid (water, isooctane and toluene) boundary surface tension. These properties are featured with several maximums depending on the absorbed dose and correlating with the modification of PET surface functionality. Studies using adsorption of acid-base indicators and IR-spectroscopy revealed that the increase of PET surface hydrophilicity is determined by the oxidation of methylene and methyne groups. Electron beam treatment of PET films on the surface of N-vinylpyrrolidone aqueous solution provided graft copolymerization with this comonomer at optimum process parameters (energy 700 keV, current 1 mA, absorbed dose 50 kGy).     

Analysis of reflectance and modulation spectroscopic lineshapes in optoelectronic device structures

We discuss the spectral lineshapes of reflectance and modulated reflectance (MR) measurements on optoelectronic device structures such as epi-layers, quantum wells (QWs), vertical-cavity surface emitting-lasers (VCSELs) and resonant-cavity light-emitting diodes (RCLEDs). We consider the various methods for the extraction of built-in electric fields and band-gap energies from Franz-Keldysh oscillations (FKO), using the example of a tensilely strained InGaAs QW system, whose InGaAsP barriers yield strong FKO. We describe how critical point transition energies can be easily obtained by eye from Kramers-Kronig (KK) transforms of low field or QW modulation spectra, using the example of the modulated transmittance spectra of dilute-nitrogen InGaAsN p-i-n structures. We also discuss how the ordinary reflectivity spectrum, usually acquired at the same time as the MR signal, may also be exploited to extract layer thicknesses and compositions, and information about the active QW absorption spectrum in VCSEL and RCLED structures.     

Annealing effect on soft magnetic properties and magnetoimpedance of Finemet Fe73.5Si13.5B9Nb3Au1 alloy

Effect of annealing on the soft magnetic properties of Fe_73.5Si_13.5B₉Nb₃Au₁ amorphous ribbon has been investigated by means of structure examination, magnetoimpedance ratio (MIR) and incremental permeability ratio (PR) spectra measured in the frequency range of 1–10 MHz at a fixed current of 10 mA X-ray diffraction analysis showed that the as-cast sample was amorphous and it became nanocrystalline under a proper heat treatment. When annealing amorphous alloy at 530 °C for 30, 60, 90 min, soft magnetic properties have been improved drastically. Among the samples investigated, the sample annealed at 530 °C for 90 min showed the softest magnetic behavior. The MIR and PR curves revealed the desirable changes in anisotropy field depending upon annealing.     

Electronic structure of Ti metal and TiO2 powder studied by hard and soft (Cu Kα1 and Al Kα1) X-ray photoelectron and Auger spectroscopy

High-energy X-ray photoelectron spectroscopy (XPS) is of particular importance for minimizing the effects of surface contamination by increasing photoelectron escape depths. In this study high-resolution high-energy Cu Kα₁ and soft Al Kα₁ XPS and Auger electron spectroscopy were used to compare the electronic structure of Ti in TiO₂ powder and Ti metal. The Ti 1s in TiO₂ XPS line is narrower and more symmetric than in Ti metal. A comparison of the relative intensities of the L₂₃M₂₃M₄₅ and L₂₃M₂₃M₂₃ Auger transitions in Ti metal and TiO₂ is consistent with the expected transfer of Ti 3d electrons away from the Ti site in the oxide. The satellites accompanying the Ti 1s XPS line excited by Cu Kα₁ X-rays occur at the same energies as the satellites accompanying the Ti 2s and 2p XPS lines excited by Al Kα₁ X-rays indicating that they do not depend on the core-level, the experimental resolution or inelastic scattering processes.     

Characterization of NOx species in dehydrated and hydrated Na- and Ba-Y, FAU zeolites formed in NO2 adsorption

Adsorbed ionic NO_x species formed upon the interaction of NO₂ with dehydrated or hydrated Na- and Ba-Y, FAU zeolites were characterized using FT-IR/TPD, solid state NMR, and XANES techniques. NO₂ disproportionates on both dehydrated catalyst materials forming NO⁺ and NO₃⁻ species. These ionic species are stabilized by their interactions with the negatively charged zeolite framework and the charge compensating cations (Na⁺ and Ba²⁺), respectively. Although the nature of the adsorbed NO_x species formed on the two catalysts is similar, their thermal stabilities are strongly dependent on the charge compensating cations. In the presence of water in the channels of these zeolite materials new paths open for reactions between NO⁺ and H₂O, and NO₂ and H₂O, resulting in significant changes in the adsorbed ionic species observed. These combined spectroscopic investigations afforded the understanding of the interactions between water and NO₂ on these zeolite catalysts.