Effect of diffusion on rates and molecular weights in graft polymerization

A theoretical analysis has been made of the graft polymerization process in terms of the quantitative interrelationship between the initiation rate R_i, the k_p/k_t^1/ ratio of the monomer, the equilibrium solubility M of the monomer in the polymer, the polymer film thickness L, and the diffusivity D of the monomer in the polymer. It is shown how the values of these parameters in any grafting system interact to lead to diffusion-controlled graft polymerization. Whether graft polymerization is diffusion-free or diffusion-controlled depends on the values of K_p, d, k_p/k_p^1/2, and L as gathered in the parameter A = [(K_p/k_t^1/2)R_i, D,/^1/2] L/2. When the values of the various terms are such that A is less than 0.1 (i.e., D is large while R_i, k_p, and L are small), the reaction is diffusion-free. When A is greater than 3 (i.e., D is small while R_i, k_p, and L are large), the reaction is diffusion-controlled. The derived equations showing the relationship between kinetic and diffusional parameters are theoretically applicable to all grafting systems, i.e., for all monomer-polymer combinations under all conditions of reaction temperature, radiation intensity and polymer film thickness. The theoretical analysis has been verified for the rate and degree of polymerization for the radiation-induced graft polymerization of styrene to polyethylene.     

Enantioseparation of amino acid derivatives on an immobilized network polymer derived from L-tartaric acid

Seven structurally related amino acid derivatives were successfully enantioseparated by HPLC with a commercially available column containing a chiral immobilized network polymer derived from L-tartaric acid. The experiments were carried out under normal-phase conditions. All the solutes could be baseline separated using n-hexane/2-propanol (95/5) as eluent at a flow rate of 1 ml/min at 25 degrees C, with reasonable retention time (<12 min). The effects of the polar alcohol modifier (type and content) in the mobile phase and the column temperature on the enantioseparation were studied. Apparent thermodynamic parameters were also calculated from the plots of ln alpha or ln k' versus 1/T. Some mechanistic aspects of chiral recognition were discussed with respect to the structures of the solutes. It was found that the enantioseparations are all enthalpy driven, and the N-acyl groups of the solutes have significant influence on the chiral recognition.     

Action des perfluoroalkylcuivre(I) sur les perfluoroalkylethylenes

A series of new polyfluorinated dienes 3, containing the novel -CFCHCHCF-, pattern has been synthesized (50–70% yields) by reacting perfluoroalkyl iodides with perfluoroalkyl-ethylenes in the presence of copper. The monoalkenes R_fCFCHCH₂CF₂R′_f and the saturated compounds R_fCF₂CH₂CH₂CF₂R′_f were obtained by varying the experimental conditions. The ¹H and ¹⁹F NMR spectra are analysed and the reaction mechanism is discussed.     

Electron attachment on HI and DI in a uniform supersonic flow: thermalization of the electrons

In order to check the electron thermalization in the CRESU technique (Cinetique de Reaction en Ecoulement Supersonique Uniforme, e.g., "reaction kinetics in a uniform supersonic flow"), electron attachment on HI and DI has been studied in the 48-170 K range. Attachment to HI is exothermic and the reaction is expected to be fast and to proceed at a rate close to the capture limit. On the contrary, attachment to DI is slightly endothermic, and a strong positive temperature dependence of the measured rate coefficient is expected if the electrons are thermal. This dependence is not observed, and we conclude that the electrons are not in thermal equilibrium with the neutrals in the afterglow. A model, based on electron heating by superelastic collisions with the buffer gas, is proposed to explain this fact and implications for previously published results are discussed.     

Application of principal component regression to the determination of Captopril by differential pulse polarography with no prior removal of dissolved oxygen

As shown in this paper, multivariate calibration in general and principal component regression (PCR) in particular allow the determination of Captopril by differential pulse polarography (DPP) in the presence of oxygen despite the overlap between their polarographic bands. Electrochemical parameters (pulse amplitude, pulse delay and drop time) are optimized from response surfaces using PCR to determine the relationship between the variables to be optimized and the relative square error of prediction (RSEP), which was adopted as the parameter to be minimized. The proposed method is quite fast and inexpensive as a result of the decreased analysis times and sparing use of the inert gas. It was applied to the determination of Captopril in synthetic samples and a commercially available pharmaceutical preparation, with relative errors and confidence intervals <2.5% and 2.0%, respectively. It should be noted that the sample can be analysed directly following dissolution in water without the need to remove the excipients.     

The preparation of precisely defined lithium isotope mixtures

The need for accurate (< 0.06%) isotopic blends of ⁶Liand ⁷Li is explained and their preparation is discussed. It is shown that lithium must be determined at an accuracy level better than 0.035%. Four methods — acid-base titration with hydrochloric acid or benzoic acid, and weighing as sulphate or carbonate — were tested and improved for the precise and accurate analysis of lithium hydroxide solutions. The results of these four methods for a 0.1 M solution agreed within ± 0.02%. The preparation of pure isotopically enriched lithium hydroxide solutions, with specially purified cation- and anion-exchangers, is described. The prepared products contain as little as 100 μg of other alkali metals and 50 μg of alkaline-earth metals per gram of lithium, and are sufficiently free of anions to permit accurate chemical assay of lithium. No changes in the isotopic compositions of 99% ⁶Li or 99.99% ⁷Li were detected during the treatment.     

Conversion of 3-benzoyl-1-methyl-4-phenyl-γ-piperidol by arylamines and arylhydrazines. Synthesis of 3-arylamino-1-oxo-1-phenylpropanes and 1,3-diarylpyrazoles and their fragmentation under electron impact

It has been established that on heating, 3-benzoyl-4-hydroxy-1-methyl-4-phenylpiperidine is ring-opened in the presence of arylamines by a type of retroaldol reaction, with subsequent transamination of the intermediate Mannich base and the formation of 3-arylamino-1-oxo-1-phenylpropanes. When using arylhydrazines this γ-piperidol is recyclized with the formation of 1,3-diarylpyrazoles and their 4,5-dihydro derivatives. The mass spectral behavior of a series of 3-arylamino-substituted 1-phenylpropanones has been studied. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1486–1495, October, 2007.     

Adsorption of dyes on activated carbon and graphitic thermal carbon black

The adsorption of a basic dye (Methylene Blue; MB) and an acidic dye (Acid Orange; AO) has been studied on three activated carbons (ACs; FAS, SKD, and BAU) significantly differing in their porous structures and surface concentrations of ion-exchange groups and on graphitic thermal carbon black (GTCB). The effective specific surface area of FAS, SKD, and BAU determined by dye adsorption is, respectively, 60, 50, and 40% of the BET nitrogen adsorption surface area. The MB uptake on ACs and GTCB increases with rising pH, while the AO uptake decreases. Addition of an electrolyte (0.3 M NaCl) virtually does not effect the adsorption of dyes on ACs and GTCB. It is suggested that hydrophobic interactions, and not ionic ones, are the major contributors to the adsorption of dyes on ACs.     

Phosphate-selective electrodes containing immobilised ionophores

Phosphate selective electrodes have been produced based upon rubbery membranes containing heterocylic macrocycles as sensors covalently bound to a cross-linked polystyrene-block–polybutadiene-block–polystyrene (SBS) polymer. The membranes were robust and the best HPO₄²⁻-selective membrane fabricated was composed of 7.1% (m/m) dicumyl peroxide, 28.3% (m/m) 2-nitrophenyloctylether, 9.8% (m/m) 3-(10-undecenyl)-1,5,8-triazacyclodecane-2,4-dione, 31.0% (m/m) SBS and 23.8% (m/m) PoleStar™ 200R (clay-based filler). The characteristics of this electrode were a linear Nernstian range of 3.9×10⁻³ to 1×10⁻⁶ mol dm⁻³ HPO₄²⁻ with a limit of detection of 1.0×10⁻⁶ mol dm⁻³ HPO₄²⁻, a slope of −29.7±0.9 mV per activity decade and a pH range from 6 to 8. Selectivity coefficients for phosphate against various interfering anions (chloride, sulfate and nitrate) were determined. Response times were 2 min or under, stability of response and electrode lifetime in continuous use were also very satisfactory. The response behavior of HPO₄²⁻-ISEs based upon mobile and bound ionophores was comparable and suggests that mobility of the ionophore is not necessary to obtain a working ISE and that covalent binding of ionophores can be used to produce ISEs of increased stability and robustness.     

Reduction par les sels chromeux de bromures benzyliques ortho-o-acyles avec transposition du groupement acyle : De l'' ester : acces aux ortho-hydroxybenzyl cetones non masquees et une nouvelle preparation de benzo¦b¦furannes substitues en position-2

The σ-bonded organochromium (III) complexes resulting from the reduction of -O-acyl benzylic bromides with CrCl₂., undergo an 1,5-transposition of the ester acyl functional group which allows, through selected experimental conditions either a selective access to the unmasked -hydroxybenl ketones or a new preparation of the 2-substituted benzo¦b¦furans . The scope and limitations of the method are presented.