Determination of urinary arsenic and impact of dietary arsenic intake

An analytical method based on microwave decomposition and flow injection analysis (FIA) coupled to hydride generation atomic absorption spectrometry (HGAAS) is described. This is used to differentiate arsenite [As(III)], arsenate [As(V)], monomethylarsonic acid (MMA) and dimethylarsinic acid (DMA) from organoarsenic compounds usually present in seafood. Without microwave digestion, direct analysis of urine by HGAAS gives the total concentration of As(III), As(V), MMA and DMA because organoarsenic compounds such as arsenobetaine, usually found in most seafood, are not reducible upon treatment with borohydride and therefore cannot be determined by using the hydride generation technique. The microwave oven digestion procedure with potassium persulfate and sodium hydroxide as decomposition reagents completely decomposes all arsenicals to arsenate and this can be measured by HGASS. Microwave decomposition parameters were studied to achieve efficient decomposition and quantitative recovery of arsenobetaine spiked into urine samples. The method is applied to the determination of urinary arsenic and is useful for the assessment of occupational exposure to arsenic without intereference from excess organoarsenicals due to the consumption of seafood. Analysis of urine samples collected from an individual who ingested some seafood revealed that organoarsenicals were rapidly excreted in urine. After the ingestion of a 500-g crab, a 10-fold increase of total urinary arsenic was observed, due to the excretion of organoarsenicals. The maximum arsenic concentration was found in the urine samples collected approximately between 4 to 17 hr after eating seafood. However, the ingestion of organoarsenic-containing seafoods such as crab, shrimp and salmon showed no effect on the urinary excretion of inorganic arsenic, MMA and DMA.     

n-Hexane dehydrocyclization over Pt?Ni supported on alumina catalysts

Pt–Ni/-Al₂O₃ catalysts have been prepared and studied in n-hexane dehydrocyclization. The selectivity for benzene and toluene, a chain lengthening product formation was improved by Ni and correlated with its content.

---

Pt–Ni/-Al₂O₃ -. Ni . Ni , .

     

PMTFP与中性磷萃取剂对钇(Ⅲ)的协同萃取

本文用萃取法测定了(Ⅰ)Y(Ⅲ)/0.5MNaClO_4/PMTFP—C_6H_6和(Ⅱ)Y(Ⅲ)/0.5MNaClO_4/PMTFP—TBP—C_6H_6及(Ⅲ)Y(Ⅲ)/0.5MNaClO_4/PMTFP—TOPO—C_6H_6体系的萃取平衡常数和协苹平衡常数,结果如下: 体系(Ⅰ)的1gK3_(30)=-3.36;体系(Ⅱ)的1gK_(32)=4.47; 体系(Ⅲ)的1gK_(31)=6.65、1gK_(32)=9.08。     

Analysis of organotin compounds by grignard derivatization and gas chromatography-ion trap tandem mass spectrometry

The determination of organotin compounds in water using gas chromatography-tandem mass spectrometry (GC-MS-MS) is described. Several organotin derivatives were synthesized by the reaction of organotin chlorides with Grignard reagents such as methyl-, propyl- and pentylmagnesium halides. After the optimization of the GC-MS-MS conditions, several derivatizations with the Grignard reagents were compared by evaluating the molar responses and volatilities of the derivatives and derivatization yields. As a result, the derivatizing reagent of choice is pentylmagnesium bromide. Calibration curves for the mono-, di- and tributyltins and mono-, di- and triphenyltins with pentylmagnesium bromide were linear in the range of 0.5-100 pg of Sn. The instrumental detection limits of six organotins ranged from 0.20 to 0.35 pg of Sn. The recovery tests from water samples (500 ml) were performed by using sodium diethyldithiocarbamate (DDTC) as a complexing reagent. Except for monophenyltin, the absolute recoveries of organotins from pure water at 200 ng of Sn/l were satisfactory. The recoveries calibrated by surrogate compounds (perdeuterated organotin chlorides) ranged from 71 to 109%. The method detection limits ranged from 0.26 to 0.84 pg of Sn (500-ml sample). This method was applied to the recovery of organotins from river water and seawater. The calibrated recoveries were between 90 and 122%.     

Synthesis, linear, and quadratic-nonlinear optical properties of octupolar D3 and D2d bipyridyl metal complexes

A series of D3 (Fe(II), Ru(II), Zn(II), Hg(II)) and D2d (Cu(I), Ag(I), Zn(II)) octupolar metal complexes featuring different functionalized bipyridyl ligands has been synthesized, and their thermal, linear (absorption and emission), and nonlinear optical (NLO) properties were determined. Their quadratic NLO susceptibilities were determined by harmonic light scattering at 1.91 microm, and the molecular hyperpolarizability (beta0) values are in the range of 200-657 x 10(-30) esu for octahedral complexes and 70-157 x 10(-30) esu for tetrahedral complexes. The octahedral zinc(II) complex 1 e, which contains a 4,4'-oligophenylenevinylene-functionalized 2,2'-bipyridine, exhibits the highest quadratic hyperpolarizability ever reported for an octupolar derivative (lambdamax=482 nm, beta1.91(1 e)=870 x 10(-30) esu, beta0(1 e)=657 x 10(-30) esu). Herein, we demonstrate that the optical and nonlinear optical (NLO) properties are strongly influenced by the symmetry of the complexes, the nature of the ligands (donor endgroups and pi linkers), and the nature of the metallic centers. For example, the length of the pi-conjugated backbone, the Lewis acidity of the metal ion, and the increase of ligand-to-metal ratio result in a substantial enhancement of beta. The contribution of the metal-to-ligand (MLCT) transition to the molecular hyperpolarizability is also discussed with respect to octahedral d6 complexes (M=Fe, Ru).     

Planar defects in β-alumina

Sodium β-alumina crystals were elaborated by melting of a mixture of Na₂CO₃ and Al₂O₃ or by PbO flux evaporation and were studied by transmission electron microscopy. They exhibit regular planar defects lying in the {11.0} prismatic planes. These defects are described as antiphase boundaries for the cationic sublattice with fault vectors $\text{1}\text{2}\text{〈10.0〉}$ (such faults do not affect the anionic sublattice). As a consequence it would be interesting to study precisely the structure of the sodium β cationic lattice in the vicinity of the melting point.     

New compounds obtained by enzymatic oxidation of phloridzin

Oxidation of phloridzin was studied in a model system in the presence of apple polyphenol oxidase. In addition to 3-hydroxy phloridzin, two major oxidation products were purified by reversed phase HPLC at the semi-preparative scale. Their structures were elucidated by UV, ESI-MSⁿ and NMR spectroscopies. The first compound was a colourless product, whose novel structure strongly differs from its precursor showing a biphenyl moiety and a propionic acid chain. The second product was an oxidised form of the first one and corresponded to a stable yellow pigment with two isomeric forms. A mechanism of formation of these products, which implied successive oxidation and nucleophilic addition steps was proposed.     

Acid-Catalyzed Rearrangements of 5,6-exo-Epoxy-7-oxabicyclo[2.2.1]hept-2-yl Derivatives. Migratory Aptitudes of Acyl vs. Alkyl Groups in Wagner-Meerwein Transpositions

In the presence of HSO₃F/Ac₂O in CH₂CL₂, 2-exo- and 2-endo-cyano-5,6-exo-epoxy-7-oxabicyclo[2.2.1]hept-2-yl acetates ( 6a , b ) gave products derived from the epoxide-ring opening and a 1,2-shift of the unsubstituted alkyl group (σ bond C(3)–C(4)). In contrast, under similar conditions, the 5,6-exo-epoxy-7-oxabicyclo[2.2.1]heptan-2-one ( 6c ) gave 5-oxo-2-oxabicyclo[2.2.1]heptane-3,7-diyl diacetates 20 and 21 arising from the 1,2-shift of the acyl group. Acid treatment of 5,6-exo-epoxy-2,2-dimethoxy-7-oxabicyclo[2.2.1]heptane ( 6d ) and of 5,6-exo-epoxy-2,2-bis(benzyloxy)-7-oxabicyclo[2.2.1]heptane ( 6e ) gave minor products arising from epoxide-ring opening and the 1,2-shift of σ bond C(3)–C(4) and major products ( 25 , 29 ) arising from the 1,3-shift of a methoxy and benzyloxy group, respectively. Under similar conditions, 5,6-exo-epoxy-2,2-ethylenedioxy-7-oxabicyclo[2.2.1]heptane ( 6f ) gave 1,1-(ethylenedioxy)-2-(2-furyl)ethyl acetate ( 32 , major) and a minor product 33 , arising from the 1,2-shift of σ bond C(3)–C(4). The following order of migratory aptitudes for 1,2-shifts toward electron-deficient centers has been established: acyl > alkyl > alkyl α-substituted with inductive electron-withdrawing groups. This order is valid for competitive Wagner-Meerwein rearrangements involving equilibria between carbocation intermediates with similar exothermicities.     

Photocrosslinking of functionalized rubber. II. Photoinitiated cationic polymerization of epoxidized liquid natural rubber

Low molecular weight epoxidized natural rubber has been crosslinked within seconds by UV irradiation in the presence of a triarylsulfonium salt. The photoinitiated cationic ring-opening polymerization was studied quantitatively by infrared spectroscopy and shown to proceed with surprisingly long kinetic chains in such solid medium. The high conversion (60%) needed for complete insolubilization, together with the presence of tetrahydrofuran structures, argue in favor of an intramolecular polymerization process involving neighboring epoxy groups. The photoinitiator concentration has a strong influence on the rate and extent of the reaction, as well as on the depth of cure profile. Because of an efficient dark process, close to 100% conversion was reached upon storage of the irradiated elastomer at ambient, with a concomitant increase of the gel fraction and the polymer hardness. The grafting of pendent acrylate groups onto the polymer chain leads to a three-fold decrease of the initial rate of polymerization of the epoxide. The photocuring of natural rubber bearing both epoxy and acrylate groups generates a dual polymer network which combines the properties of the two moieties. © 1995 John Wiley & Sons, Inc.     

烯烃羰化—步制醇铑系催化新体系的研究

羰基铑催化剂由于其加氢性能较弱，在羰基化反应的研究中，通常仅作为烯烃氢甲酰化制醛的催化剂。产物中得不到醇。本文则报道了以Ｒｈ＿２（ＡｃＯ）＿４和Ｒｈ＿６（ＣＯ）＿１６为催化剂，在一个反应器内进行烯烃氢甲酰化，加氢制醇的研究。系统考察了Ｒｈ／Ｐｂｕ＿３／ＥｔＯＨ催化体系受各种反应条件的影响。在最佳反应条件下，烯烃转化率达１００％。对醇选择性亦在９９．５％以上，正异构比在２以上．为烯烃一步制醇建立了铑系催化新体系。文中并利用红外光谱测定了反应过程的催化剂物种．实验证明，由烯烃一步制醇是由烯烃首先进行氢甲酰化反应，然后由生成的醛进一步加氢成醇的一个串联反应过程。前一步骤反应速度较快，２ｈ内可使９５％以上的烯烃转化为醛，后面由醛加氢成醇则进行缓慢，在１００—１２０℃下，至少２２ｈ，才能使醛全部转化为醇。