脉冲激光频域干涉技术在超快动力学物理中的应用

介绍了一种具有fs时间分辨力的超短脉冲激光频域干涉测试技术,详细论述了该技术的工作原理和系统构成,指出传输时间差和相位差是影响频域干涉条纹周期的主要因素。采用脉冲激光频域干涉仪测量了200 nm厚度铝膜在波长800 nm、单脉冲能量0.7 mJ、脉宽35 fs脉冲激光作用下的运动速度剖面。在单次飞秒脉冲激光作用下,铝膜自由面的运动速度峰值可达960 m/s,速度剖面的上升前沿小于5.77 ps,表明脉冲激光频域干涉技术可用于测量材料在超快脉冲激光作用下的冲击动力学参数。     

Near-field radiative heat transfer between two plane surfaces with one having a dielectric coating

The effect of a dielectric coating on the near-field radiative heat transfer between two plane surfaces is numerically studied in the framework of the fluctuational electrodynamics. The dielectric coating is assumed to be a SiC or SiO₂ film, which is on top of the emitter. The results show that the near-field radiative flux between the plane surfaces can be either diminished or enhanced by the dielectric coating, depending on the thermal radiative properties of the emitter and the receiver. Furthermore, the dielectric coating effect on the near-field radiative flux can be very different from that on the far-field radiative flux. Detailed analysis on the variations of the TE- and TM-wave components of the radiative flux by adding the dielectric coating is provided, along with the physical mechanisms that account for these changes. Dielectric coatings such as SiC and SiO₂ films are widely seen in microelectronic structures and nanofabrication devices. The results obtained in this work should be valuable for further study and nanotechnological applications of near-field radiative heat transfer.     

Laser diode end-pumped Yb:YAG/LBO green laser

With a type-I critical phase-matching LBO crystal, an intracavity frequency doubled solid-stated Yb:YAG green laser is reported. Using a plano-concave resonator, with pump power of 1.37 W, 24.5 mW TEM₀₀ continuous wave laser at 525 nm was obtained. The optical conversion efficiency is 1.8%. By adjusting the placed angle of LBO, several lasers wavelength from 525.0 to 537.8 nm could be extracted. The maximum output power at 537.8 nm is 3.1 mW.     

Absorption Enhancement of Ultrathin Crystalline Silicon Solar Cells with Dielectric Si_3N_4 Nanostructures

A design of ultrathin crystalline silicon solar cell with Si3 N4 circular truncated cone holes(CTCs) arrays on the top is proposed. In this article, we perform an optical simulation of the structure. The finite-difference time-domain method is used to calculate the optical absorption of different periods, radius of top and bottom circles and depth of Si3 N4 CTCs. The short-circuit current density generated by the optimized cells(30.17 mA/cm~2) is 32.44% more than the value gained by control group(with flat Si3 N4). Then adding a layer of back silver to allow us to better analyze optical absorption. Later, we simulate the optimization of the same configuration of different silicon thicknesses andfind that our structure does enhance the light absorption. This work uses a combined path towards achieving higher photocurrent ultrathin crystalline silicon solar cells by constructing the texture of anti-reflection coating.     

Circulation times of hepatocellular carcinoma cells by in vivo flow cytometry

Hepatocellular carcinoma （HCC） may metastasize to many organs. The survival rate is almost zero for metastatic HCC patients. Molecular mechanisms of HCC metastasis need to be understood better and new therapies must be developed. We have developed the ＂in vivo microscopy＂ to study the mechanisms that govern liver tumor cells spreading through the microenvironment in vivo. A recently developed ＂in vivo flow cytometer＂ combined with real-time confocal fluorescence imaging is used to assess spreading and the circulation kinetics of liver tumor cells. We measure the depletion kinetics of two related human HCC cell lines, high-metastatic HCCLM3 cells and low-metastatic HepG2 cells, which are from the same origin and obtained by repetitive screenings in mice. More than 60% of the HCCLM3 cells are depleted within the first hour. Interestingly, the low-metastatic HepG2 cells possess noticeably slower depletion kinetics. In comparison, less than 40% of the HepG2 cells are depleted within the first hour. The differences in depletion kinetics might provide insights into early metastasis processes.     

Network connectivity entropy and its application on network connectivity reliability

The network structure entropy has served as one of the index measuring network heterogeneity, but it gives no considerations to the impact of isolated nodes on the network structure. In addition, the all-terminal reliability is zero and is unable to compare it between disconnected networks. Therefore, the concept of network connectivity entropy is suggested to remove the current bottleneck and helps facilitate new index in terms of network connectivity reliability. This study fully proves the rules as follows: when the edges of network are diminishing, the newly-established network connectivity reliability will remain unchanged or become weaker; conversely, when the edges of network are increasing, the network connectivity reliability will remain unchanged or become stronger. Thus, the proposed index of network connectivity reliability is proved reasonable. Furthermore, the impaired metro network of Nanjing city is exemplified to demonstrate the validity and practicability of network connectivity reliability. The result shows that this new approach is in good position to compute network connectivity reliability quickly and effectively, and also to compare it between different networks.     

Generalized Hyperbolic Octonion Formulation for the Fields of Massive Dyons and Gravito-Dyons

The close analogy between electromagnetic theory and linear gravity is discussed by the hyperbolic (split) octonion formalism. Using the similarities between the relevant field equations of massive dyons in electromagnetic theory and gravito-dyons in linear gravity, a new mathematical model is proposed to formulate these fields in a compact and simple form. The generalized wave equation including both massive dyon and monopole terms is derived. Similarly, the most generalized form of hyperbolic octonionic Klein–Gordon equation is obtained for the hypothetical particle carrying simultaneously both electromagnetic and gravitational charges (masses).     

Optimization of detection device geometry for NIR spectroscopy using a three-layered model of stone fruit

The influences of detection device geometry and fiber optic parameters on near infrared spectroscopy measurements were assessed using stone fruit models based on Monte Carlo simulation. The stone fruit was modeled as concentric spherical layered tissues including the skin, the flesh and the core. The choices of the detection angle, the diameter of the detection fiber, the numerical aperture, and the height of the probe were discussed. Receiving diffuse reflectance signals at detection angles in the range of 35°–50° and normalizing the detection signals by the collection area and the solid acceptance angle prior to use are suggested. Fiber probes with diameters D = 0.06 cm or 0.1 cm, NA = 0.20 or 0.30, and height h ≤ 0.8 cm are preferred. The probe deflection angle should be limited to within ±5° to guarantee measurement accuracy.