Spatial-dependent probe transmission based high-precision two-dimensional atomic localization

Herein, we propose a scheme for the realization of two-dimensional atomic localization in aλ-type three-level atomic medium such that the atom interacts with the two orthogonal standing-wave fields and a probe field. Because of the spatially dependent atom-field interaction, the information about the position of the atom can be obtained by monitoring the probe transmission spectra of the weak probe field for the first time. A single and double sharp localized peaks are observed in the one-wavelength domain. We have theoretically archived high-resolution and high-precision atomic localization within a region smaller thanλ/25×λ/25. The results may have potential applications in the field of nano-lithography and advance laser cooling technology.     

Synthesis,anticancer, and computational studies of 1, 3, 4-oxadiazole-purine derivatives

Theophylline-7-acetic acid (acefylline) ( 3 ) and its derivatives are pharmacologically active compounds and generally recognized as bronchodilators for the treatment of respiratory diseases like acute asthma for over 70 years. In this article, synthesis of 2-((5-((1,3-dimethyl-2,6-dioxo-2,3-dihydro-1H-purin-7(6H)-yl)methyl)-1,3,4-oxadiazol-2-yl)thio)-N-arylacetamides ( 10a-j ) has been reported. All the synthesized derivatives ( 10a-j) were structurally verified by FT-IR, ¹H NMR, ¹³C NMR and evaluated for their anti-cancer (using MTT assay), hemolytic and thrombolytic potential. N-(4-Chlorophenyl)-2-(5-((1,3-dimethyl-2,6-dioxo-2,3-dihydro-1H-purin-7(6H)-yl)methyl)-1,3,4-oxadiazol-2-ylthio)acetamide ( 10g ) was found to be the most active against human liver cancer cell lines (Huh7) having cell viability 53.58 ± 1.28 using 100 μg/mL concentration of compound which was further in-silico modelled to describe the possible mechanistic insights for its anti-proliferative activity. The results of hemolytic and thrombolytic activities indicated that these derivatives were less toxic and hold considerable potential as a drug candidate. 2-(5-((1,3-Dimethyl-2,6-dioxo-2,3-dihydro-1H-purin-7(6H)-yl)methyl)-1,3,4-oxadiazol-2-ylthio)-N-(2-fluorophenyl)acetamide ( 10c ) of the series was found to be least toxic with 0.1% hemolysis relative to ABTS (95.5%) as positive control. 2-(5-((1,3-Dimethyl-2,6-dioxo-2,3-dihydro-1H-purin-7(6H)-yl)methyl)-1,3,4-oxadiazol-2-ylthio)-N-(tetrahydro-2H-pyran-4-yl)acetamide ( 10j ) exhibited potent clot lysis activity (90%) as compared to negative control DMSO (0.57%).     

New Cycloartane and Flavonol Glycosides from Corchorus depressus

Two new monodesmosidic cycloartane triterpene glycosides, depressosides E and F, and two new flavonol glycosides, depressonol A and B, were isolated from the butanol‐soluble part of the EtOH extract of Corchorus depressus L . The structures of the new compounds were elucidated as (22R,24S)‐22,25‐epoxy‐9,19‐cyclolanostane‐3β,16β,24‐triol 3‐[α‐L ‐rhamnopyranosyl‐(1→4)‐β‐D ‐glucopyranoside] ( 1 ), (22R,24S)‐22,25‐epoxy‐9,19‐cyclolanostane‐3β,16β,24‐triol 3‐[α‐D ‐glucopyranosyl‐(1→3)‐β‐D ‐glucopyranoside] ( 2 ), kaempferol 3‐[β‐D ‐glucopyranosyl‐(1→4)‐β‐D ‐galactopyranoside] 7‐[α‐L ‐arabinofuranoside] ( 4 ), and kaempferol 3‐[β‐D ‐glucopyranosyl‐(1→6)‐β‐D ‐galactopyranoside] 7‐[α‐L ‐arabinofuranoside] ( 5 ) on the basis of chemical evidence and detailed spectroscopic studies.     

Cascade-exciton model analysis of level density parameter dependence in proton induced fission cross sections of some sub-actinide nuclei

Fission cross sections strongly depend on the ratio of the level density parameter in fission to neutron emission, a_f/a_n. In this work, a cascade-exciton model implemented in the code CEM95 has been used to observe this effect for proton induced fission cross sections of tungsten, lead and bismuth. The method was employed using different level density parameter ratios for each fission cross section calculation. The calculated fission cross sections are compared with the available experimental data in the literature. It has been observed that a change of the ratio of the level density parameter, a_f/a_n, is necessary with the incident energy of the proton, to best estimate the fission cross sections in CEM95.     

Fabrication of magnetite nanoparticles (Fe3O4-NPs) for catalytic pyrolysis of nutshells biomass

The fabrication of nanoparticles has been perused as a topic of critical importance in the present decades. Biosynthesis of nanoparticles employs plants extract instead of harmful chemicals. These plant extracts act as reducing and capping agents which is the most appropriate and eco-friendly method among all the preparative routs. In present study, the magnetite nanoparticles (Fe₃O₄-NPs) were fabricated using rapid, single step and benign biosynthetic rout by reduction of ferric nitrate nonahydrate solution with Ferocactus echidne aqueous extract containing ascorbic acid as a main reducing and capping agent. The structural and morphological properties of prepared iron oxide nanoparticles were investigated by Powder X-ray diffraction and scanning electron microscopy. The size of the synthesized nanoparticles was approximately 15 ± 2 nm as determined by Scherrer equation. The biosynthetically fabricated nanoparticles were employed as catalyst for pyrolysis of nutshells to produce biofuel. Catalytic pyrolysis of biomass yields biofuel as an alternative source of energy and chemical feed stock. Effect of temperature, heating rate, and amount of catalyst were investigated on conversion percentage and product yields. Aniline point, carbon residue, and cetane number of prepared bio-oil were also determined.     

On-line spectrophotometric determination of scandium after preconcentration on XAD-4 resin impregnated with nalidixic acid

An on-line scandium preconcentration and determination method was developed with spectrophotometer associated with flow injection. Scandium from aqueous sample solution of pH 4.5 was selectively retained in the minicolumn containing XAD-4 resin impregnated with nalidixic acid at a flow rate of 11.8 mL min^?1 as scandium–nalidixic acid complex. The scandium complex was desorbed from the resin by 0.1 mol L^?1 HCl at a flow rate of 3.2 mL min^?1 and mixed with arsenazo-III solution (0.05 % solution in 0.1 mol L^?1 HCl, 3.2 mL min^?1) and taken to the flow through cell of spectrophotometer where its absorbance was measured at 640 nm. The preconcentration factors obtained were 35 and 155; detection limits of 1.4 and 0.32 μg L^?1 and sample throughputs of 40 and 11 were obtained for preconcentration time of 60 and 300 s, respectively. The tolerance limits of many interfering cations like Th(IV), U (VI), rare-earths and anions like tartrate, citrate, oxalate and fluoride were improved. The method was successfully applied to the determination of scandium from mock seawater samples and good recovery was obtained. The method was also validated on certified reference material IAEA-SL-1 (lake sediment) and the result was in good agreement with the reported value.     

Determination of haloacetic acids in water using layered double hydroxides as a sorbent in dispersive solid‐phase extraction followed by liquid chromatography with tandem mass spectrometry

In the present study, highly efficient and simple dispersive solid‐phase extraction procedure for the determination of haloacetic acids in water samples has been established. Three different types of layered double hydroxides were synthesized and used as a sorbent in dispersive solid‐phase extraction. Due to the interesting behavior of layered double hydroxides in an acidic medium (pH?4), the analyte elution step was not needed; the layered double hydroxides are simply dissolved in acid immediately after extraction to release the analytes which are then directly introduced into a liquid chromatography with tandem mass spectrometry system for analysis. Several dispersive solid‐phase extraction parameters were optimized to increase the extraction efficiency of haloacetic acids such as temperature, extraction time and pH. Under optimum conditions, good linearity was achieved over the concentration range of 0.05–100 μg/L with detection limits in the range of 0.006–0.05 μg/L. The relative standard deviations were 0.33–3.64% (n = 6). The proposed method was applied to different water samples collected from a drinking water plant to determine the concentrations of haloacetic acids.     

A novel ditopic ring-expanded N-heterocyclic carbene ligand-assisted Suzuki-Miyaura coupling reaction in aqueous media

A series of seven-membered ditopic ring-expanded N-heterocyclic carbene (dre-NHC) precursors, bearing sterically demanding and electron-rich aryl groups, were synthesised in moderate yields via the reaction of 1,2,4,5-tetrakis(bromomethyl)benzene with the corresponding N,N′-diarylformamidines in the presence of K₂CO₃ in acetonitrile under an air atmosphere. All new compounds were characterised by HRMS, NMR spectroscopy, and microanalysis, as well as X-ray crystallography for compound 1c. The development of an efficient catalytic system for the Suzuki-Miyaura coupling reaction of aryl chlorides with various boronic acids was also investigated using the in situ generated dre-NHC ligands.     

Revisiting the structure and dynamics of hydrated Cd2+ in aqueous solutions: Insights from the RI-SCS-MP2/MM molecular dynamics simulation

The spin component scale MP2/molecular mechanics molecular dynamics simulation investigated the hydration shell formation and hydrated Cd²⁺ dynamics in the water environment. At the first hydration shell, six water molecules with 2.27 Å for the average distance between water and Cd²⁺. Dynamical properties were analyzed by computing the water molecule's mean residence time (MRT) in its first and second hydration shells. The MRT of each shell was determined to be 31.8 and 1.92 ps, suggesting the strong influence of Cd²⁺ in the first hydration shell. The second shell was labile, with an average number of water molecules being 18. Despite the strong interaction between Cd²⁺ and water molecules in the first shell, the influence of ions in the second hydration shell remained weak.