Ku-band EMI shielding effectiveness and dielectric properties of Polyaniline-Y2O3 composites

Electromagnetic interference (EMI) shielding has become a phenomenon of great concern and there is growing demand towards the synthesis of materials with better EMI shielding effectiveness (EMI SE). This work highlights the preparation of Polyaniline-Yttrium Oxide (PANI-Y₂O₃) composites for EMI shielding applications in the frequency range from 12.4 to 18 GHz (Ku-band). The structure and morphology of the composites were investigated by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). EMI SE, microwave absorption and reflection, dielectric properties of the composites are discussed in detail. All the computations were based on microwave scattering parameters measured by transmission line waveguide technique. The observed results show absorption dominant EMI shielding in these composites with EMI SE of ?19 to ?20 dB, which mainly depends on the dielectric loss of the composites. Through the results of our observations, we propose these composites to be potential materials for microwave absorption and EMI shielding applications.     

Scaling of Shielded Sliding Discharges for Environmental Applications

Shielded sliding discharges are nanosecond streamer discharges which develop along a dielectric between metal foil electrodes, with one of the foils extended over the entire rear of the dielectric layer. The electrode configuration not only allowed rearranging discharges in parallel due to the decoupling effect of the metal layer, but also to modify the electric field distribution in such a way that components normal to the surface are enhanced, leading to an increased energy density in the discharge plasma. By varying the electrode gap, the applied voltage, and the repetition rate, it is shown that by keeping the average electric field constant, the discharge voltage can be reduced from tens of kV to values on the order of a few kV, but only at the expense of a reduced energy density of the plasma. Varying the repetition rate from 20 to 500 Hz resulted in a slightly reduced energy per pulse, likely caused by residual charges on the dielectric surface. Measurements of the NO conversion to NO₂ and ozone synthesis in dry air showed that the conversion is only dependent on the energy density of the discharge plasma. Although reducing the pulse voltage from the tens of kV range to that of few kV, and possibly even lower, causes a reduction in energy density, this loss can be compensated for by increasing the electrode gap area. This and the possibility to form discharge arrays allows generating large volume discharge reactors for environmental applications, at modest pulsed voltages.     

Essential Role of the N- and C-terminals of Laccase from Pleurotus florida on the Laccase Activity and Stability

POXA1b is the most thermostable laccase isoenzyme from Pleurotus ostreatus. POXA1b is remarkably stable at alkaline pH (the t_1/2 at pH 10 was 30 days), and its C-terminal affects its catalytic and stability properties. We cloned POXA1c from P. florida, which showed 99 % identity with POXA1b. POXA1c was functionally expressed in Pichia pastoris. The functions of the N and C termini of POXA1c were investigated using site-directed mutagenesis. Compared with POXA1c, the N-terminal R5V site effectively increased the specific activities for 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and guaiacol by 2- and 3.5-fold, respectively. A C-terminal truncated mutant, POXA1c△13, also increased the specific activities for ABTS and guaiacol by 2.3- and 3.4-fold, respectively. A double mutant, POXA1cΔ13-R5V, combined the R5V and △13 effects. The specific activity of this double mutant for ABTS was 1,321 U/mg, which indicated a 4-fold increase compared with the wild type. The role of residue V5 on laccase catalytic properties was also observed for laccases from Trametes versicolor and Rigidoporus lignosus. The specific activities of the V5R of the laccases from T. versicolor and R. lignosus were half of that of the wild type. The pH and thermal stability analysis of POXA1c and its mutants showed that the enzymes were remarkably stable because they showed 63 % residual activity after incubation for 108 h at 30 °C over a pH range of 4.5 to 9.0. Similar results were observed for POXA1cΔ13-R5V. POXA1cΔ13-R5V can be widely used in industrial biotechnology because of its excellent catalytic properties.     

Metal–Sulfur Linkages Achieved by Organic Tethering of Ruthenium Nanocrystals for Enhanced Electrochemical Nitrogen Reduction

Inspired by the metal–sulfur (M-S) linkages in the nitrogenase enzyme, here we show a surface modification strategy to modulate the electronic structure and improve the N₂ availability on a catalytic surface, which suppresses the hydrogen evolution reaction (HER) and improves the rate of NH₃ production. Ruthenium nanocrystals anchored on reduced graphene oxide (Ru/rGO) are modified with different aliphatic thiols to achieve M-S linkages. A high faradaic efficiency (11 %) with an improved NH₃ yield (50 μg h⁻¹ mg⁻¹) is achieved at −0.1 V vs. RHE in acidic conditions by using dodecanethiol. DFT calculations reveal intermediate N₂ adsorption and desorption of the product is achieved by electronic structure modification along with the suppression of the HER by surface modification. The modified catalyst shows excellent stability and recyclability for NH₃ production, as confirmed by rigorous control experiments including ¹⁵N isotope labeling experiments.     

Synthesis,Structure and Elastic Properties of a New Hybrid Perovskite Material: [C6H14N2]KBr3

A new hybrid organic-inorganic perovskite(HOIP)material,[C6H14N2]KBr3,has been synthesized via hydrothermal method and fully characterized.[C6H14N2]KBr3 has a three-dimensional perovskite structure and crystalizes in a trigonal P3121 space group.The elastic properties of[C6H14N2]KBr3 were fully calculated via the density functional theory calculations,which reveal the elastic moduli(11.54~14.07 GPa),shear moduli(4.56~5.68 GPa),Poisson’s ratios(0.18~0.32),bulk modulus(8.51 GPa)and acoustic velocity(2.57~2.74 kms^-1).Additional nanoindentation experiments in the form of single-crystals confirmed the validity of our theoretical approach.[C6H14N2]KBr3 exhibits higher stiffness and thermal stability than the well-known photovoltaic CH3NH3PbI3,which makes it worthwhile for exploring optoelectronic properties.     

Selective cytotoxicity of organotin(IV) compounds with 2,3-dihydroxybenzyldithiocarbazate Schiff bases

Research on Chemical Intermediates - A series of tridentate ONS Schiff bases were synthesised via condensation by reacting 2,3-dihydroxybenzaldehyde with S-2-methylbenzyldithiocarbazate (S2MBDTC)...     

Thermal dry reforming of methane over La2O3 co-supported Ni/MgAl2O4 catalyst for hydrogen-rich syngas production

Research on Chemical Intermediates - The excess emission of greenhouse gases (GHGs) such as CO2 and CH4 is posing an acute threat to the environment, and efficient ways are being sought to utilize...     

Study of the interfacial charge transfer in bismuth vanadate/reduce graphene oxide (BiVO4/rGO) composite and evaluation of its photocatalytic activity

Research on Chemical Intermediates - We prepared unique BiVO4/reduce graphene oxide (BiVO4/rGO) nanocomposite with enhanced photocatalytic ability by hydrothermal method applying...     

Hybrid thermal management of lithium-ion batteries using nanofluid,metal foam,and phase change material: an integrated numerical–experimental approach

Safety issues of Li-ion batteries imposed by unfavorable thermal behavior accentuate the need for efficient thermal management systems to prevent the runaway conditions. To that end, a hybrid thermal management system is designed and further investigated numerically and experimentally in the present study. The passive cooling system is fabricated by saturating copper foam with paraffin as the phase change material (PCM) and integrated with an active cooling system with alumina nanofluid as the coolant fluid. Results for various Reynolds numbers and different heating powers indicate that the hybrid nanofluid cooling system can successfully fulfill safe operation of the battery during stressful operating conditions. The maximum time in which all PCM field is changed to the liquid phase is defined as the onset of the stressful conditions. Therefore, the start time of stressful conditions at 41 W and Re 420 is increased from 3700 s with nanofluid composed of 1% volume fraction nanoparticles (VF-1%) to 4600 s with nanofluid VF-2% during high current discharge rates. Nanofluid cooling extends the operating time of the battery in comparison with the water-based cooling system with 200-s (nanofluid with volume fraction of 1%) and 900-s (nanofluid with volume fraction of 2%) increases in operating time at Reynolds of 420. Using nanofluid, instead of water, postpones the onset of paraffin phase transition effectively and prolongs its melting time which consequently leads to a decrease in the rate of temperature rise.

     

Selective Interactions of O-Methylated Flavonoid Natural Products with Human Monoamine Oxidase-A and -B

A set of structurally related O-methylated flavonoid natural products isolated from Senecio roseiflorus (1), Polygonum senegalense (2 and 3), Bhaphia macrocalyx (4), Gardenia ternifolia (5), and Psiadia punctulata (6) plant species were characterized for their interaction with human monoamine oxidases (MAO-A and -B) in vitro. Compounds 1, 2, and 5 showed selective inhibition of MAO-A, while 4 and 6 showed selective inhibition of MAO-B. Compound 3 showed ~2-fold selectivity towards inhibition of MAO-A. Binding of compounds 1–3 and 5 with MAO-A, and compounds 3 and 6 with MAO-B was reversible and not time-independent. The analysis of enzyme-inhibition kinetics suggested a reversible-competitive mechanism for inhibition of MAO-A by 1 and 3, while a partially-reversible mixed-type inhibition by 5. Similarly, enzyme inhibition-kinetics analysis with compounds 3, 4, and 6, suggested a competitive reversible inhibition of MAO-B. The molecular docking study suggested that 1 selectively interacts with the active-site of human MAO-A near N5 of FAD. The calculated binding free energies of the O-methylated flavonoids (1 and 4–6) and chalcones (2 and 3) to MAO-A matched closely with the trend in the experimental IC_50′s. Analysis of the binding free-energies suggested better interaction of 4 and 6 with MAO-B than with MAO-A. The natural O-methylated flavonoid (1) with highly potent inhibition (IC₅₀ 33 nM; Ki 37.9 nM) and >292 fold selectivity against human MAO-A (vs. MAO-B) provides a new drug lead for the treatment of neurological disorders.