Effects of plasticiser on the lithium ionic conductivity of polymer electrolyte PVC-LiCF3SO3

Solid polymer electrolyte films based on poly(vinyl chloride)-lithium triflate (PVC-LiCF₃SO₃) have been prepared by the solution-cast technique in various concentrations. The film with the highest conductivity was used to prepare plasticised polymer electrolyte films by using poly(ethlene glycol) (PEG) of different molecular weights, i.e., 200, 400 and 600 gmol⁻¹. These films were prepared to study the effects of addition of low molecular weights PEG on the lithium ionic conduction of the PVC based polymer electrolyte. The films were characterised by electrochemical impedance spectroscopy (EIS) and Fourier transform infrared-spectroscopy (FTIR). Results indicate that the molecular weight has an inverse effect on the conductivity and this has been accounted for by FTIR. Paper presented at the International Conference on Functional Materials and Devices 2005, Kuala Lumpur, Malaysia, June 6 – 8, 2005.     

Interacting generalized ghost dark energy in a non-flat universe

We investigate the generalized Quantum Chromodynamics (QCD) ghost model of dark energy in the framework of Einstein gravity. First, we study the non-interacting generalized ghost dark energy in a flat Friedmann-Robertson-Walker (FRW) background. We obtain the equation of state parameter, w _D = p/ρ, the deceleration parameter, and the evolution equation of the generalized ghost dark energy. We find that, in this case, w _D cannot cross the phantom line (w _D > ?1) and eventually the universe approaches a de-Sitter phase of expansion (w _D → ?1). Then, we extend the study to the interacting ghost dark energy in both a flat and non-flat FRW universe. We find that the equation of state parameter of the interacting generalized ghost dark energy can cross the phantom line (w _D < ?1) provided the parameters of the model are chosen suitably. Finally, we constrain the model parameters by using the Markov Chain Monte Carlo (MCMC) method and a combined dataset of SNIa, CMB, BAO and X-ray gas mass fraction.     

Current-driven electron drift solitons

The soliton formation by the current-driven drift-like wave is investigated for heavier ion (such as barium) plasma experiments planned to be performed in future. It is pointed out that the sheared flow of electrons can give rise to short scale solitary structures in the presence of stationary heavier ions. The nonlinearity appears due to convective term in the parallel equation of motion and not because of temperature gradient unlike the case of low frequency usual drift wave soliton. This higher frequency drift-like wave requires sheared flow of electrons and not the density gradient to exist.     

Structural, electronic, and optical properties of ZnOl_xSex alloys using first-principles calculations

The structural, electronic, and optical properties of binary ZnO, ZnSe compounds, and their ternary ZnOl_xSex alloys are computed using the accurate full potential linearized augmented plane wave plus local orbital （FP-LAPW ＋ lo） method in the rocksalt （B 1） and zincblende （B3） crystallographic phases. The electronic band structures, fundamental energy band gaps, and densities of states for ZnO1_xSex are evaluated in the range 0 〈 x 〈 1 using Wu-Cohen （WC） generalized gradient approximation （GGA） for the exchange-correlation potential. Our calculated results of lattice parameters and bulk modulus reveal a nonlinear variation for pseudo-binary and their ternary alloys in both phases and show a considerable deviation from Vegard＇s law. It is observed that the predicted lattice parameter and bulk modulus are in good agreement with the available experimental and theoretical data. We establish that the composition dependence of band gap is semi-metallic in B1 phase, while a direct band gap is observed in B3 phase. The calculated density of states is described by taking into account the contribution of Zn 3d, O 2p, and Se 4s, and the optical properties are studied in terms of dielectric functions, refractive index, reflectivity, and energy loss function for the B3 phase and are compared with the available experimental data.     

Switchable Q-switched and laser operating mode-locked erbium-doped fiber in the L-band region

We demonstrate a switchable Q-switched and mode-locked erbium-doped fiber laser （EDFL） operating in the L-band region using the nonlinear polarization rotation effect. The switching operation is achieved by controlling intensity-dependent loss using a polarization controller. In Q-switching mode, the EDFL produces a pulse train with a repetition rate of 21.1 kHz, pulse width of 7.7 #s, and pulse energy of 13.6 nJ. The EDFL also generates a multi-wavelength comb with a very narrow and constant wavelength spacing of 0.045 nm and optical signal-to-noise ratio of at least l0 dB. During mode locking, the EDFL produces stretched pulses with 3-dB bandwidth of 26.2 nm, pulse width of 350 fs, repetition rate of 2.38 MHz, and pulse energy of 48.56 pJ.     

Application of an electrostatically actuated cantilevered carbon nanotube with an attached mass as a bio-mass sensor

In the present paper, another latent capability of SWCNT as a mass sensor is investigated. The relationship between the resonant frequency, dynamic pull-in voltage at the resonance frequency shift, and the attached mass is established by using the nonlocal Euler–Bernoulli beam theory. Using this relationship, a general closed-form nonlinear sensor-equation has been derived for the detection of the mass attached to the SWCNT. The aim of this study and present model is to show the sensitivity of the Cantilevered SWCNT to the values and positions of attached mass. Moreover, the results indicate that by increasing the value of attached mass and considering a single non-local scaling parameter (e₀), the values of dynamic pull-in voltage at the resonance frequency shift are decreased. Because of the small scaling parameter (e₀), the mass sensitivity of carbon nanotube increases, when the position of the attached mass is in the tip of a Cantilevered SWCNT length. The authority and the accuracy of these formulas are examined with other pull-in sensor equations in literatures. The results demonstrate that the new sensor equation can be applied for CNT-based mass sensors with rational accuracy.     

Emodin,A Naturally Occuring Anthraquinone: Its Isolation and Spectrophotometric Determination in Rumex Cyprius Plant

A new method for isolation and specrophotometric determination of emodin is presented. Emodin was isolated by thin layer chromatography (tlc) and column chromatography (cc) techniques, as an orange long crystalline substance. Emodin exhibits two absorption maxima, at 420 and 520 nm. Stability of the color and the effect of pH were studied. Beer's law is obeyed in the range 2–30 ppm.

The method is applied to the determination of emodin in roots, stems, and leaves of Rumex cyprius plant.     

Scanning tunneling microscopy and surface simulation of zinc-blende GaN(001) intrinsic 4x reconstruction: linear gallium tetramers?

Scanning tunneling microscopy images confirm electron diffraction studies that the zinc-blende GaN(001)-4x reconstruction consists of rows aligned along [110] with a spacing along [110] of 4a. Dual-bias imaging shows a 180 degree shift of the corrugation maximum position between the profiles of empty and occupied states, in agreement with surface simulations based on the 4 x 1 linear tetramer model of Neugebauer et al. [Phys. Rev. Lett. 80, 3097 (1998)]. Electronic structure calculations predict a surface band gap of 1.1 eV, close to the measured value of 1.14 eV and the previously predicted value (1.2 eV). Despite the successes of this model, high-resolution images reveal an unexpected 3x periodicity (not seen in diffraction) along the [110] row direction, indicating the need for a 4 x 3 model, and putting into question the existence of linear Ga tetramers.     

Localization of elastic waves in heterogeneous media with off-diagonal disorder and long-range correlations

Using the Martin-Siggia-Rose method, we study propagation of acoustic waves in strongly heterogeneous media which are characterized by a broad distribution of the elastic constants. Gaussian-white distributed elastic constants, as well as those with long-range correlations with nondecaying power-law correlation functions, are considered. The study is motivated in part by a recent discovery that the elastic moduli of rock at large length scales may be characterized by long-range power-law correlation functions. Depending on the disorder, the renormalization group (RG) flows exhibit a transition to localized regime in any dimension. We have numerically checked the RG results using the transfer-matrix method and direct numerical simulations for one- and two-dimensional systems, respectively.