Uptake of Tm(III) ions onto polyurethane foam from H2O - ethanol mixture containing 1-(2-pyridylazo)-2-naphthol (PAN)

Summary The sorption of microquantities of Tm(III) ions on washed polyurethane foam (PUF) from a mixture of aqueous solution and ethanol containing PAN was examined. The maximum sorption of 3.18^. 10^-6M solution of Tm(III) ions was observed at pH 8 with 30-minute equilibration time. The optimum ratio of aqueous-ethanol phase for the sorption of Tm(III) ions was found to be 3:1 v/v, respectively. The sorption rate of metal ions on PUF is followed a first order kinetics and obeyed the equation for an intra particle diffusion process. The equilibrium concentration data of Tm(III) ions could be described satisfactorily by several adsorption isotherms. The Freundlich adsorption isotherm constants 1/nand K_Fare 0.66±0.02 and (5.7±0.3)^. 10^-3mol^. g^-1, respectively. The Langmuir isotherm constants for monolayer coverage (Q) and binding strength of sorption (b) are (2.5±0.7)^. 10^-5mol^. g^-1and (1.6±0.1)^. 10⁴l^. mol^-1, respectively. The sorption capacity derived from Dubinin-Radushkevich (D-R) isotherm is (1.7±0.2)^. 10^-4mol^. g^-1and the sorption free energy (E) is 9.8±0.2 kJ^. mol^-1indicating chemisorption phenomena. The thermodynamic parameters indicate that the sorption of Tm(III) ions onto PUF is endothermic, entropy driven and spontaneous in nature.     

Sensory, physicochemical and microbiological quality of irradiated minimally processed cauliflower

Minimally processed cauliflower samples were irradiated, stored at 5 °C for 2 weeks and analyzed for sensory, physicochemical and microbiological qualities at 0th, 7th and 14th days. The data showed highest mean values of 7.93 and 7.57 for appearance and flavor, respectively, for 1.0 kGy treated samples. The D₁₀ values of contaminating microorganisms on cauliflower were 0.20 (Escherischia coli) and 0.24 kGy (Salmonella paratyphae A.) and the resulting 5D₁₀ value was 1.2 kGy. The study revealed that a dose of 1.5 kGy is enough for retention of quality and reduction of microbial load to 5D₁₀ values in cauliflower during 2 weeks storage at refrigerated temperature.     

Dynamics of molecular oxygen in micellar solutions

Fluorescence quenching by molecular oxygen has been employed to estimate dynamic parameters and solubility characteristics of molecular oxygen in micelle forming detergent solutions. A kinetic model which assumes that oxygen quenching occurs only in the micellar phase is employed to analyze the data.     

A study of simultaneous photolysis and photoaddition reactions of riboflavin in aqueous solution

The photodegradation reactions of riboflavin (RF) in the presence of 0.05-2.00 M phosphate (pH 7.0) have been studied using a specific multicomponent spectrophotometric method. The reactions involve simultaneous photolysis (intramolecular photoreduction) and photoaddition (intramolecular photoaddition) leading to lumichrome (LC) and cyclodehydroriboflavin (CDRF), respectively, as major products. The contribution of each reaction in the overall photodegradation depends upon the phosphate concentration, i.e., higher the phosphate concentration higher the extent of photoaddition. The apparent first-order rate constants for the photodegradation of RF and for the formation of LC and CDRF at 0.25-2.00 M phosphate concentration range from 0.65 to 3.03 x 10(-2), and from 0.41 to 0.99 x 10(-2) and 0.12 to 1.63 x 10(-2) min(-1), respectively. The second-order rate constants for the phosphate catalysed photodegradation of RF and for the formation of LC and CDRF are 2.12 x 10(-4) and 0.61 x 10(-4) and 1.41 x 10(-4) M(-1)s (-1), respectively. Since the formation of CDRF by photoaddition is catalysed by HPO(4)(2-) ions, it is suggested that H(2)PO(4)(-) ions may be involved in the formation of LC by photolysis. Thus, both H(2)PO(4)(-) and HPO(4)(2-) ions may catalyse the two major reaction pathways of riboflavin photodegradation, respectively.     

Reaction of Cα,O-dilithiooximes with functionalized carbonyl compounds. Part 2 . Reaction with α-chloroketones and α,β-unsaturated aldehydes and ketones

The reaction of Cα,O-Dilithiooximes 2 and α-chloroketones afforded 5-(hydroxymethyl)-Δ²-soxazolines 4 . α,β-Unsaturated aldehydes and ketones reacted with 2 to give the corresponding acyclic 1,2-addition products 5 . The latter were cyclized with phosphorus pentoxide to 5-vinyl-Δ²-isoxazolines 6 .     

Effects of humidity and temperature during irradiation on the response of blue PMMA dosimeter

Effects of relative humidity conditions in the irradiation chamber and of temperature of the chamber on the response of 3 mm thick light blue poly (methyl methacrylate) sheets have been studied. The response was measured spectrophotometrically at 402, 450, 596 and 612 nm. The response of the dosimeter is independent of the relative humidity (12–97%) during irradiation if the response is measured within 24 h of irradiation. If the response is measured after longer storage time, the absorbance at 402 and 450 nm increases significantly. At these two wavelengths the response of the dosimeter is also independent of the temperature of the irradiation chamber in the range of 0 to 40 °C. However, at higher temperatures (60, 80 °C), the response is not uniform.     

Enhancement of distillate selectivity in Fischer-Tropsch synthesis by using iron and cobalt catalysts in a novel dual-bed reactor ?

Summary An integrated process for producing liquid fuels from synthesis gas via a two-stage Fischer-Tropsch (FT) reaction is disclosed. An iron catalyst was used in the first bed of a fixed-bed reactor followed by a ruthenium promoted cobalt catalyst in the second bed. The activity and selectivity of the dual-bed system were assessed and compared with those using catalysts in a single bed system, separately. The methane selectivity in the dual-bed reactor was about 11% less compared to that of the single-bed system. The C₅⁺ selectivity for the dual-bed reactor was 19.7% higher than that of the single-bed system.     

INAA of toxic elements in coal and their transfer into environments

An instrumental neutron activation analytical (INAA) technique is described for the determination of 26 toxic and other trace elements in Eastern Coal (NBS SRM-1632a), local coal and its ash. The coal ash was produced by heating coal at 750°C in a muffled furnace. The transfer of these elements to the environment on the complete compustion of coal is estimated from the difference between the elemental concentration of coal and its ash.     

Microwave-assisted efficient synthesis of spiro-fused heterocycles under solvent-free conditions

Spiro-fused heterocycles were synthesized in good to high yields by a pseudo four-component reaction of an aldehyde, urea and a cyclic β-diester or a β-diamide such as Meldrum’s acid or barbituric acid derivatives using microwave irradiation under solvent-free conditions.     

Depolymerization Study of Pakistani Lignite Coal Influence of Pre‐treatments on Product Slate

Influence of pretreatments, i.e., demineralization and pre‐soaking in some solvents on the yields of liquefied products obtained from hydro‐depolymerization of Pakistani coal in a pool of hydrogen has been discussed. Results of hydrogenation experiments demonstrated that demineralizing the coal sample prior to liquefaction caused the yields to decrease compared with the virgin coal samples. The contribution of mineral matter of coal has been evaluated by comparing the yields of liquid products of virgin and leached samples. Increase in the yields obtained from the hydrogenation experiments of swollen coal samples was not satisfactorily significant.