Electrical impedance and conduction mechanism analysis of biopolymer electrolytes based on methyl cellulose doped with ammonium iodide

In the present study, the potential of methyl cellulose (MC) as biopolymer electrolyte (BPE) will be studied extensively by means of conductivity and the conduction mechanism. BPE films based on MC doped with ammonium iodide (NH₄I) salt were prepared by solution-casting method. X-ray diffraction (XRD) explains that the conductivity enhancement of the electrolytes is affected by the degree of crystallinity. Field emission scanning electron microscopy (FESEM) analysis shows the difference in the electrolyte’s surface with respect to NH₄I. On addition of 40 wt.% of NH₄I, the highest room temperature conductivity of (5.08?±?0.04)?×?10^?4 S cm^?1 was achieved. The temperature dependence relationship for the salted electrolyte was found to obey the Arrhenius rule where R² ～1 from which the activation energy (E _a) was evaluated. The dielectric study analyzed using complex permittivity ε* for the sample with the highest conductivity at elevated temperature shows a non- Debye behavior. These salted electrolytes follow the correlated barrier hopping (CBH) model.     

Effect of Agitation and Aeration Rates on Chitinase Production Using Trichoderma virens UKM1 in 2-l Stirred Tank Reactor

Shrimps have been a popular raw material for the burgeoning marine and food industry contributing to increasing marine waste. Shrimp waste, which is rich in organic compounds is an abundant source of chitin, a natural polymer of N-acetyl-D-glucosamine (GluNac), a reducing sugar. For this respect, chitinase-producing fungi have been extensively studied as biocontrol agents. Locally isolated Trichoderma virens UKM1 was used in this study. The effect of agitation and aeration rates using colloidal chitin as control substrate in a 2-l stirred tank reactor gave the best agitation and aeration rates at 200 rpm and 0.33 vvm with 4.1 U/l per hour and 5.97 U/l per hour of maximum volumetric chitinase activity obtained, respectively. Microscopic observations showed shear sensitivity at higher agitation rate of the above system. The oxygen uptake rate during the highest chitinase productivity obtained using sun-dried ground shrimp waste of 1.74 mg of dissolved oxygen per gram of fungal biomass per hour at the kappaL a of 8.34 per hour.     

Hydrogen peroxide biosensor with a supramolecular layer-by-layer design

A new sensor design is reported for the construction of an amperometric enzyme biosensor toward H (2)O(2). It was based in the supramolecular immobilization of alternating layers of horseradish peroxidase (either modified with 1-adamantane or beta-cyclodextrin-branched carboxymethylcellulose residues) on Au electrodes coated with polythiolated beta-cyclodextrin polymer. The analytical response of the electrodes, using 1 mM hydroquinone as an electrochemical mediator, increases when the number of enzyme layers increases. The biosensor having three enzyme layers showed a sensitivity of 720 microA/M cm (2) and a detection limit of 2 microM and retained 96% of its initial activity after 30 days of storage. The host-guest supramolecular nature of the immobilization method was confirmed by cyclic voltammetry.     

Ices of CO2/H2O mixtures. Reflection-absorption IR spectroscopy and theoretical calculations

Ice mixtures of CO2 and H2O are studied using Fourier transform reflection-absorption infrared (RAIR) spectroscopy. Mixtures are prepared by sequential deposition or co-deposition of the two components from the gas phase onto an Al plate kept at 87 K inside a low-pressure chamber. Two CO2 structures are found in most experiments: a crystalline form similar to pure CO2, which evaporates when warming at 105 K, and a noncrystalline species which remains embedded in amorphous water ice after warming. Significant spectral variations are found depending on the deposition method and the thickness of the solid. Features characteristic of the RAIR technique appear in the spectral regions of the normal modes of the bending and asymmetric stretching CO2 vibrations. Simulations using Fresnel theory and Mie scattering are carried out with acceptable agreement with the experimental spectra of solids of variable thickness, from approximately 1 microm to the limit of nanoparticles. Theoretical calculations of a pure CO2 crystal are performed. The relaxed geometry of the solid and its vibrational spectrum are determined and compared to the experimental results.     

Intramolecular Nicholas reaction: stereoselective synthesis of 5-alkynylproline derivatives

The intramolecular Nicholas reaction of propargylic alcohols derived from N, N-acyl-diprotected omega-semialdehydes obtained from glutamic acid provided stereoselectively 5-alkynylproline derivatives. The suitable choice of the N-protecting group (tosyl or benzoyl derivative) permitted control of the stereochemistry during the ring formation. Semiempirical calculations of the species involved in the cyclization support the observed stereochemistry.     

New eudesmane derivatives and other sesquiterpenes from the epigeal parts of Dittrichia graveolens

In bioassay-guided searches for novel bioactive natural products from higher plants of the Egyptian flora, two new eudesmane sesquiterpene derivatives, 3alpha-hydroxyilicic acid methyl ester (1) and 2alpha-hydroxy-4-epi-ilicic acid (2), together with 11 known sesquiterpenes were isolated from bioactive fractions of the active epigeal parts extracts of Dittrichia graveolens (L.) GREUTER (Asteraceae) growing in the coastal regions of northwestern Egypt. Four other known sesquiterpene lactones with different carbon skeletons, named 2alpha-hydroxy-2R-xanthalongin (8), 4-epi-isoinuviscolide (9), 8-epi-helenalin (10), and bigelovin (11), were also isolated for the first time from the same source. The stereochemical structures of the isolated compounds were elucidated on the basis of physical and spectroscopic methods including UV, IR, 1H-, 13C-NMR, distortionless enhancement by polarization transfer, 2D NMR, 1H-1H correlation spectroscopy, 1H-13C heteronuclear single-quantum coherence, 1H-13C heteronuclear multiple-bond connectivity, 1H-1H nuclear Overhauser effect spectroscopy experiments, and high-resolution mass spectrometry, as well as some chemical transformations. The antimicrobial, antiinflammatory, and antipyretic activities of D. graveolens extracts and chromatographic fractions were carried out and the various bioactivities of our findings are discussed.     

Covalent and ionic Cu(II) complexes with cyclam and substituted benzoato ligands: structural,thermal, redox and mesomorphic properties

A covalent mononuclear complex, [Cu(p–HOC₆H₄COO)₂(cyclam)] (1), and two ionic mononuclear complexes, [Cu(cyclam)(H₂O)₂](p–CH₃OC₆H₄COO)₂ (2) and [Cu(cyclam)(H₂O)₂](p–CH₃(CH₂)₁₅OC₆H₄COO)₂·H₂O (3), were formed from reaction of cyclam with [Cu₂(p–HOC₆H₄COO)₄(H₂O)₂], [Cu₂(p–CH₃OC₆H₄COO)₄(H₂O)₂] and [Cu₂(p-CH₃(CH₂)₁₅OC₆H₄COO)₄(H₂O)₂], respectively. These complexes were isolated as purple crystals with molecular structures showing distorted octahedral N₄O₂ geometry. Complexes 1 and 2 were irreversibly reduced to Cu(I) and oxidized to Cu(III), while 3 was redox inactive. Complex 2 reacted with N-(hexadecyl)isonicotinamide (L) to form [Cu(cyclam)(L)₂](p–CH₃OC₆H₄COO)₂ (4). These complexes were thermally stable (T_dec > 200 °C for 1–3 and 174 °C for 4). Complexes 3 and 4 behaved as ionic liquids (melting temperatures lower than 100 °C) and exhibited mesomorphism.     

Hydrophilic interaction chromatography with Fourier transform mass spectrometry of monosaccharide anhydrides

A fast, selective, and sensitive method for the determination of three monosaccharide anhydrides (galactosan, mannosan, levoglucosan), based on hydrophilic interaction chromatography and Fourier transform mass spectrometry, was successfully developed. The simple experimental stationary phase and mass spectrometry performance screening allowed the selection of the best available chromatographic and mass spectrometry conditions. Thus, the chromatographic separation was performed on a highly selective stationary phase containing a zwitterionic phosphorylcholine group and the monosaccharide anhydrides were detected as [M+HCOO]^? adduct in the negative mode. The method showed accuracy in the range of 84–111 and 89–102% with interbatch precision expressed as relative standard deviations of 5.6–15.4 and 5.0–9.0% for the aerosol extract and snow samples, respectively. The limit of quantification in absolute values ranged from 10 to 30 pg, the limit of quantification, expressed as concentration, ranged was 0.3–0.9 ng/m³ for aerosol and 10–20 ng/mL for snow samples. The method was successfully applied for the determination of monosaccharide anhydrides in aerosol and snow samples.     

Flow-through solid-phase reflectometric method for simultaneous multiresidue determination of nitrophenol derivatives

In this paper, a flow-through optosensor based on diffuse reflectance spectroscopy and multivariate regression modelling is proposed for simultaneous multiresidue determination of trace level concentrations of nitro-substituted phenols. The optrode integrates on-line anion-exchange sorptive preconcentration and matrix removal with direct detection of sorbed species onto the sensing layer and chemometric deconvolution of overlapped spectra. After recording of the reflectometric spectrum, fast chemosensor regeneration is accomplished with an acidic methanolic eluent followed by a metered volume of alkaline solution. The full automation of the analytical procedure is ensured by flow-programming as executed via a software-controlled multisyringe pump and a set of multiposition and solenoid valves.

Under the optimized chemical and physical variables, the 3σ_blank detection limits for 2-, and 4-nitrophenol and 2,4-dinitrophenol were 0.69, 0.42 and 0.37 μg L⁻¹, respectively, for a sample loading volume of 4.0 mL with enrichment factors of 73, 74 and 81, respectively, and repeatability better than 3.0%. The analytical applicability of the optosensing system was asserted by the satisfactory results attained in its application to monitoring of nitrophenol derivatives in spiked environmental waters including highly saline matrices via the standard additions method.     

Protein foam application for enhanced oil recovery

Protein foam was explored as a foaming agent for enhanced oil recovery application in this study. The influence of salinity and oil presence on bulk stability and foamability of the egg white protein (EWP) foam was investigated. The results were compared with those of the classical surfactant sodium dodecyl sulfate (SDS) foam. The results showed that the EWP foam is more stable than the SDS foam in the presence of oil and different salts. Although, the SDS foam has more foamability than the EWP foam, however, at low to moderate salinities (1–3 wt% NaCl), both foam systems showed improvement in foamability. At a NaCl concentration of 4.0 wt% and above, foamability of the SDS foam started to decrease drastically while the foamability of the EWP foam remained the same. The presence of oil has a destabilizing effect on both foams but the EWP foam was less affected in comparison to the SDS foam. Moreover, increasing the aromatic hydrocarbon compound percentage in the added oil decreased the foamability and stability of the SDS foam more than EWP foams. This study suggests that the protein foam could be used as an alternative foaming agent for enhanced oil recovery application due to its high stability compared to the conventional foams.