Development of novel magnetic solid-phase extraction sorbent based on Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/carbon nanosphere/polypyrrole composite and their application to the enrichment of polycyclic aromatic hydrocarbons from water samples prior to GC–FID analysis

We describe a magnetic nanocomposite that consists of Fe₃O₄/carbon nanosphere/polypyrrole (Fe₃O₄/CNS/PPy). The synthesized nanocomposites were characterized by scanning electron microscopy, transmission electron microscopy, and Fourier transform infrared spectroscopy. The nanocomposite was successfully applied to extract of the polycyclic aromatic hydrocarbons (PAHs) from water samples. Compared to Fe₃O₄/PPy, the Fe₃O₄/CNS/PPy nanocomposite exhibits improved properties in terms of extraction. The amount of adsorbent, salt effect, extraction time, desorption time, type, and the volume of desorption solvent were optimized. Following the desorption of the extracted analytes, the PAHs (i.e., naphthalene, 2-methylnaphthalene, 2-bromonaphthalene, fluorene, and anthracene) were quantified by gas chromatography–flame ionization detector. The PAHs can be determined in 0.05–100.00 ng mL^?1 concentration range, with limits of detection (at an S/N ratio of 3) ranging from 0.01 to 0.05 ng mL^?1. The repeatability of the method was investigated with relative standard deviations of lower than 9.9% (n = 5). Also, the recoveries from spiked real water samples were in the range of 88.9–99.0%. The results indicate that the novel material can be successfully applied for the extraction and analysis of PAHs from water samples.     

Strategies for Natural Products Discovery from Uncultured Microorganisms

Microorganisms are highly regarded as a prominent source of natural products that have significant importance in many fields such as medicine, farming, environmental safety, and material production. Due to this, only tiny amounts of microorganisms can be cultivated under standard laboratory conditions, and the bulk of microorganisms in the ecosystems are still unidentified, which restricts our knowledge of uncultured microbial metabolism. However, they could hypothetically provide a large collection of innovative natural products. Culture-independent metagenomics study has the ability to address core questions in the potential of NP production by cloning and analysis of microbial DNA derived directly from environmental samples. Latest advancements in next generation sequencing and genetic engineering tools for genome assembly have broadened the scope of metagenomics to offer perspectives into the life of uncultured microorganisms. In this review, we cover the methods of metagenomic library construction, and heterologous expression for the exploration and development of the environmental metabolome and focus on the function-based metagenomics, sequencing-based metagenomics, and single-cell metagenomics of uncultured microorganisms.     

A new supramolecular zinc(II) complex containing 4‐biphenylcarbaldehyde isonicotinoylhydrazone ligand: Nanostructure synthesis,catalytic activities and Hirshfeld surface analysis

A new potentially tridentate hydrazone ligand, 4‐biphenylcarbaldehyde isonicotinoylhydrazone (4‐bpinh), was prepared by the condensation of biphenyl‐4‐carboxaldehyde with isonicotinic acid hydrazide. Then, its nano‐sized and single crystal of zinc complex were synthesized using sonochemical and heat gradient methods, respectively. The structure of complex, [Zn(4‐bpinh)₂ Br₂] (1), was determined by single‐crystal X‐ray diffraction, FT‐IR, and elemental analysis, and the nano‐structure of complex was characterized by FT‐IR, XRD, and SEM. The single crystal X‐ray structure of complex showed that the metal center has a distorted tetrahedral geometry and the hydrazone ligand acts as monodentate trough the pyridyl N atom. Moreover, the analysis of crystal structures indicates the existence of intermolecular interactions such as N/C–H?Br/O, N/C–H?π, and π?π stacking in the stabilization of complex structure which finally led to the formation of the three‐dimensional supramolecular structure. Also, the impact of this interactions was more studied using Hirshfeld surface analysis and corresponding 2D fingerprint plots. Furthermore, the catalytic activity of 1 was studied in the selective oxidation of various sulfides to corresponding sulfoxides using hydrogen peroxide as the oxidative agent.     

Solid-phase extraction based on multi-walled carbon nanotube (MWCNT) sorbents combined with bio-coacervation extraction for the determination of atrazine from water samples followed by HPLC analysis

In this study, combined technique of solid-phase extraction based on multi-walled carbon nanotubes with bio-coacervation extraction (SPE-MWCNT-BCAE) has been developed as a new sample preparation method for the determination of atrazine from water samples. The proposed method involves two steps: analyte enrichment on the solid sorbent and subsequently elution of the analyte by an appropriate solvent. Multi-walled carbon nanotubes (MWCNTs) were used as the sorbent. They have high specific surface area, nano-scale structure and high diffusion rate. The second step is based on the use of bioaggregates for analyte re-enrichment, which consists of biosurfactants and ionic liquid. This method follows the principles of green chemistry. Parameters affecting the extraction efficiency were optimized. Under optimum conditions, the enrichment factor was 176. The linear dynamic range (LDR) and limit of detection (LOD) were 2–100 µg L^?1 and 0.66 µg L^?1, respectively. The relative standard deviation (RSD) for six replicate measurements was 3.8%. The method was applied to the determination of ultratrace levels of atrazine in environmental water samples with satisfactory results.     

Enhanced properties of photovoltaic devices tailored with novel supramolecular structures based on reduced graphene oxide nanosheets grafted/functionalized with thiophenic materials

For verifying the influence of donor–acceptor supramolecules on photovoltaic properties, different hybrids were designed and used in organic solar cells. In this respect, reduced graphene oxide (rGO) was functionalization with 2‐thiophene acetic acid (rGO‐f‐TAA) and grafted with poly(3‐dodecylthiophene) (rGO‐g‐PDDT) and poly(3‐thiophene ethanol) (rGO‐g‐PTEt) to manipulate orientation of poly(3‐hexylthiophene) (P3HT) assemblies. Face‐on, edge‐on, and flat‐on orientations were detected for assembled P3HTs on rGO and its functionalized and grafted derivatives, respectively. Alteration of P3HT orientation from face‐on to flat‐on enhanced current density (J _sc), fill factor (FF), and power conversion efficiency (PCE) and thus J _sc = 7.11 mA cm^?2, FF = 47%, and PCE = 2.14% were acquired. By adding phenyl‐C71‐butyric acid methyl ester (PC71BM) to active layers composed of pre‐designed P3HT/rGO, P3HT/rGO‐f‐TAA, P3HT/rGO‐g‐PDDT, and P3HT/rGO‐g‐PTEt hybrids, photovoltaic characteristics further improved, demonstrating that supramolecules appropriately mediated in P3HT:PC71BM solar cells. Phase separation was more intensified in best‐performing photovoltaic systems. Larger P3HT crystals assembled onto grafted rGOs (95–143 nm) may have acted as convenient templates for the larger and more intensified phase separation in P3HT:PCBM films. The best performances were reached for P3HT:P3HT/rGO‐g‐PDDT:PCBM (J _sc = 9.45 mA cm^?2, FF = 54%, and PCE = 3.16%) and P3HT:P3HT/rGO‐g‐PTEt:PCBM (J _sc = 9.32 mA cm^?2, FF = 53%, and PCE = 3.11%) photovoltaic systems. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 1877–1889     

Basic Ionic Liquid as Catalyst and Reaction Media for the One‐pot Three‐component Regioselective Synthesis of Various Thiazol‐2‐imine Derivatives

Thiazol‐2‐imine derivatives were synthesized in an easy and efficient route from the regioselective one‐pot three‐component reaction of aryl amine, alkylisothiocyanate, and various α‐haloketones in [omim][OH] basic ionic liquid. Recyclable reaction media, catalyst free, and short reaction times are the main advantages of this protocol. This method produces the products at room temperature in excellent yields (68–96%). Furthermore, the target compound 6b was determined by X‐ray crystallographic analysis.     

铜催化硫代硫酸钠与卤代芳烃偶联的无硫醇路径合成二芳基硫化物

报道了一个在聚乙二醇中由卤代芳烃合成不同二芳基硫化物的高效方法.在Cu催化剂作用下,无味、易得、稳定的Na2S2O3· 5H2O盐是有效的硫源.     

Synthesis and catalytic study of open metal site metal–organic frameworks of Cu3(BTC)2 microbelts in selective organic sulfide oxidation

The synthesis of open metal site metal–organic frameworks of Cu₃(BTC)₂ with microbelt morphology and a study of the catalytic oxidation of organic sulfides are reported. This CuBTC was found to be an efficient, selective and waste‐free green heterogeneous co‐catalyst for the green H₂O₂ catalytic oxidation of sulfides. The catalyst can be isolated from the reaction mixture and reused at least five times. Copyright © 2016 John Wiley & Sons, Ltd.