Indirect Determination of Trace Copper(II) by Adsorptive Stripping Voltammetry with Zincon at a Carbon Paste Electrode

Traces of copper(II) can be determined by adsorptive stripping voltammetry using 2‐carboxy‐2′‐hydroxy‐5′‐sulfoformazyl benzene (Zincon) as complex forming reagent. First in phosphate buffer pH 6.4, copper(II)‐Zincon complex was adsorbed on carbon paste electrode (CPE) with an accumulation potential of 0.6 V. Following this, adsorbed complex was oxidized and detected by differential pulse voltammetric (DPV) scan from 0.6 to 1.0 V. The effective parameters in sensor response were examined. The detection limit (DL) of copper(II) was 1.1 μg/L and relative standard deviations (RSDs) for 10 and 200 μg/L Cu(II) were 1.81 and 1.03%, respectively. The calibration curve was linear for 2–220 μg/L copper(II). The resulting CPE does not use mercury and therefore, has a positive environmental benefit. The method, which is reasonably sensitive and selective, has been successfully applied to the determination of trace amount of copper in water and human hair samples.     

An efficient synthesis of pyrazolo[3,4‐b]pyrrolo[2,3‐d]pyridines from 5‐aminopyrazoles and cyclic β‐keto ester

5‐Chloroethylpyrazolo[3,4‐b]pyridines were synthesized by condensation of 5‐aminopyrazoles with α‐acetyl γ‐butyrolactone followed by cyclization treating with phosphorous oxychloride. 5‐Chloroethyl‐pyrazolo[3,4‐b]pyridines, thus obtained, were then converted to the corresponded tricyclic pyrazolo[3,4‐b]‐pyrrolo[2,3‐d]pyridines by treating with some primary amines.     

Electrospinning of nylon-6,6 solutions into nanofibers: Rheology and morphology relationships

The relationship between the rheological properties of nylon-6,6 solutions and the morphology of their electrospun nanofibers was established. The viscosity of nylon-6,6 in formic acid(90%) was measured in the concentration range of 5 wt%-25 wt% using a programmable viscometer. Electrospinning of nylon-6,6 solutions was carried out under controlled parameters. The chemical structure, morphology and thermal properties of the obtained nanofibers were investigated using Fourier transform infrared spectroscopy(FTIR), scanning electron microscopy(SEM) and differential scanning calorimetry(DSC), respectively. Entanglement concentration(ce) was found to be 15 wt% and a power law relationship between specific viscosity and solution concentration was observed with exponents of 2.0 and 3.3 for semi-dilute unentangled(c ce) and semi-dilute entangled(c ce) regimes, respectively. The diameter and uniformity of the nanofibers were found to be dependent on the viscosity. Moreover, the average diameter of electrospun nanofibers was found to be dependent on zero shear rate viscosity and normalized concentration(c/ce) in a power law relationship with exponents of 0.298 and 0.816, respectively. For nylon-6,6 solutions, the entanglement concentration(ce = 15 wt%) provides the threshold viscosity required for the formation of a stable polymeric jet during electrospinning and producing uniform beadless fibers. For concentrations less than ce, beaded fibers with some irregularities are formed. DSC analysis showed an increase in crystallinity of all electrospun samples compared to original polymer. Furthermore, Based on FTIR spectroscopy, α phase is dominant in electrospun nanofibers and minor amount of β and γ phases is also available.     

One‐Pot Synthesis of New 1,5‐Disubstituted Tetrazoles Bearing 2,2‐Bis(trimethylsilyl)ethenyl Groups via The Ugi Four‐Component Condensation Reaction Catalyzed by MgBr2·2Et2O

A simple one‐pot Ugi four‐component condensation reaction has been developed for the synthesis of tetrazoles bearing 2,2‐bis(trimethylsilyl)ethenyl groups from the synthesized 4‐[2,2‐bis(trimethylsilyl) ethenyl]benzaldehyde ( 1 ), various amines, isocyanides, and trimethylsilylazide at room temperature, without solvent, and in the presence of catalytic amounts of MgBr₂·2Et₂O as catalyst.     

Synthesis,anti‐migration and burning rate catalytic mechanism of ferrocene‐based compounds

One of the most important components of solid rocket propellant is the burning rate catalysts (BRC) which enhance burning rate of solid composite propellant. Low‐pressure exponents and stable burning rate are the key features of an excellent solid propellant. Addition of BRC to the propellant results in the increase of burning rate of the propellant and decrease in pressure exponents. Among all BRC, ferrocene‐based BRC have attracted much attention because of their better microscopic homogeneities in distribution, ignitability of the propellants and good compatibility with organic binder. However, the main barrier for the development and practical applications of ferrocene‐based BRC is their migration property. This article reviews the field and highlights recent progress. Copyright © 2014 John Wiley & Sons, Ltd.     

On the completeness of eigenfunctions of the Frankl problem with the oddness condition

Modified Frankl problems with the oddness condition are considered for the Lavrent’ev-Bitsadze equation. The eigenvalues and eigenfunctions of these problems are found. The completeness of these eigenfunctions in the elliptic part of the domain is proved.     

Dynamic pressure based prediction of spray cooling heat transfer coefficients

An important goal of spray cooling research is the ability to predict local heat transfer from the spray hydrodynamics. It is postulated that the local normal pressure exerted by the spray onto the heated surface can be used to obtain the local heat transfer coefficient. This hypothesis was tested using data obtained from hollow cone, full cone, and linear sprays at four nozzle pressures and three stand-off distances. A correlation between the pressure and heat transfer coefficient was determined from the data, then used to “predict” the heat transfer coefficient to verify the accuracy of the correlation. The area averaged heat transfer coefficient could be predicted within 25%, indicating that pressure can be used to predict the local heat transfer coefficient in the single-phase regime.