Monitoring nitrite with optical sensing films

A new, low-cost nitrite sensor was developed by immobilizing a direct indicator dye in an optical sensing film for food and environmental monitoring. This sensor was fabricated by binding Safranine O to a cellulose acetate film that had previously been subjected to an exhaustive base hydrolysis. The membrane has good durability (>12 months) and a short response time (<8 s). Nitrite can be determined for the range of 0.005-2.00 μg ml⁻¹ with 3δ detection limits of 0.001 μg ml⁻¹. The method is easy to perform and uses acetylcellulose as a carrier. The reagents used for the activity of the cellulose support are inexpensive, non-toxic and widely available.     

4,4-Acetalidine-bis-(3-methyl isoxazolone-5) as a new colorimetric reagent for the determination of palladium and uranium

Summary Palladium and uranium react with 4,4-acetalidine-bis-(3-methyl isoxazolone-5) in acid medium to give yellow color having a visual limit of identification at 2 and 15g per ml. This color reaction provides the basis of a new method for colorimetric determination of palladium and uranium. Copper also gives yellow color but it cannot be determined with this color reaction because the color intensity is not stable. The maximum tolerable limit of various ions is reported.

---

Zusammenfassung Pd und U reagieren in saurem Milieu mit 4,4-Acetalidin-bis-(3-methyl-isoxazolon-5) unter Gelbfärbung mit einer Erfassungsgrenze von 2 bzw. 15g/ml. Diese Farbreaktion dient als Grundlage für eine neue kolorimetrische Methode für Pd und U. Cu gibt zwar auch eine Gelbfärbung, kann aber damit nicht bestimmt werden, da die Farbintensität nicht beständig ist. Die maximal tolerierbare Menge der Fremdionen wird angegeben.

     

Two‐Dimensional Holo‐ and Hemidirected Lead(II) Coordination Polymers: Synthetic,Spectroscopic, Thermal,and Structural Studies of [Pb(μ‐SCN)2(μ‐ebp)1.5]n and {[Pb(μ‐OAc)(μ‐ebp)](ClO4)}n (ebp=4,4′‐[(1E)‐Ethane‐1,2‐diyl]bis[pyridine]; OAc=Acetato)

Two new coordination polymers of Pb^II complexes with bridging 4,4′‐[(1E)‐ethane‐1,2‐diyl]bis[pyridine] (ebp), thiocyanato, and acetato ligands, [Pb(μ‐SCN)₂(μ‐ebp)_1.5]_n ( 1 ) and {[Pb(μ‐OAc)(μ‐ebp)](ClO₄)}_n ( 2 ), were synthesized and characterized by elemental analysis, FT‐IR, ¹H‐ and ¹³C‐NMR, thermal analysis, and single‐crystal X‐ray diffraction. In 1 , the Pb²⁺ ions are doubly bridged by both the ebp and the SCN⁻ ligands into a two‐dimensional polymeric network. The seven‐coordinate geometry around the Pb²⁺ ion in 1 is a distorted monocapped trigonal prism, in which the Pb²⁺ ions have a less‐common holodirected geometry. In 2 , the Pb²⁺ ions are bridged by AcO⁻ ligands forming linear chains, which are also further bridged by the neutral ebp ligands into a two‐dimensional polymeric framework. The Pb²⁺ ions have a five‐coordinate geometry with two N‐atoms from two ebp ligands and three O‐atoms of AcO⁻. Although ClO acts as a counter‐ion, it also makes weak interactions with the Pb²⁺ center. The arrangement of the ligands in 2 exhibits hemidirected geometry, and the coordination gap around the Pb²⁺ ion is possibly occupied by a configurationally active lone pair of electrons.     

Metal chelates of heterocyclic nitrogen-containing ketones,Part XXII. Spectroscopic studies on rhodium(III) complexes of phenyl-2-picolylketone-2-pyridyl hydrazone

Summary Mono, bis and tris complexes of rhodium(III) with phenyl-2-picolylketone-2-pyridyl hydrazone (PPKPyH) have been characterized. In every case, the imino-proton of PPKPyH shows marked acidity associated with the coordination to rhodium(III). Electronic spectra show that all complexes are octahedral. The B-values suggest a strong covalency in the metal-ligand -bond and the Dq-values indicate a medium-strong ligand field. The magnetic susceptibility indicates that PPKPyH forms low-spin complexes with rhodium(III).¹H n.m.r. spectra show that the tris(ligand) complexes arecis isomers. I.r. spectra show that the ligand is neutral or monobasic tridentate or bidentate. Far i.r. studies show that [Rh(PPKPyH)X₃] · 2 H₂O (X = Cl, Br or I) aremer isomers. The effect of pH variation on the rection products is also discussed.     

Differential pulse cathodic stripping adsorption voltammetric determination of trace amounts of lead using factorial design for optimization

A sensitive cathodic stripping voltammetric method is developed for determination of lead(II), with adsorptive collection of complexes with Pyrogallol red (PGR) on to a hanging mercury drop electrode. After accumulation of the complex at −0.80 V vs. Ag/AgCl reference electrode, the potential is scanned in a negative direction from −0.20 to −0.50 V with differential pulse method. Then the reduction peak current for the lead(II)-PGR complex is measured at −0.39 V. The influence of reagent and instrumental variables was completely studied by factorial design analysis. The optimum analytical conditions for the determination of lead(II) were established. Under optimum conditions, lead(II) determined in the range of 0.1-30.0 ng ml⁻¹ with a limit of detection of 0.06 ng ml⁻¹. The method is successfully applied to determination of lead(II) in water sample.     

HPLC and GC Methods for Determination of Lubricants and Their Evaluation in Analysis of Real Samples of Polyethylene

High performance liquid chromatography (HPLC) and gas chromatography (GC) are introduced for analysis of polymer lubricants (stearamide, oleamide and erucamide). In the HPLC method, a reverse phase octadecylsilane (ODS) column along with acetonitrile/methanol (60:40) as a mobile phase were used. Detection of analytes was performed by a UV detector at 202 nm. The analysis time was less than 8 min. In the GC method, polar capillary column and flame ionization detector (FID) were used for separations and detection, respectively. The analysis time by GC was longer than HPLC and was about 30 min. Limits of detection, linear range and repeatability of both methods are similar, but determination of oleamide in real samples by HPLC method is difficult due to complexity of the initial part of HPLC chromatogram in polyethylene samples. That problem is not observed in the GC method. Detection limits in both methods for all analytes are lower than 0.003% which are much lower than the amount of lubricants in commercial polymers (0.05–0.2%).     

Normal subgroup based power graph of finite groups

Ricerche di Matematica - Let G be a finite group and $$N \unlhd G$$ . The normal subgroup based power graph of G, $$\Gamma _N(G)$$ , is an undirected graph with vertex set $$(G{\setminus }N) \cup...     

New Developments on Operator Reverse AM-GM Inequality for Positive Linear Maps

Acta Mathematica Sinica, English Series - In this research article, we shall give some reverse Arithmetic-Geometric mean inequalities for unital positive linear maps on Hilbert space operators...     

Reactions of [(Cp)2Ti(NCS)2] as a potential metalloligand; synthesis and physico-chemical investigations of novel heterobimetallic complexes

Summary Bis(cyclopentadienyl)titanium(IV) diisothiocyanate [(Cp)₂-Ti(NCS)₂] reacts with MCl₂ (M = Cu, Pd or Pt), [CuCl(PPh₃)₃], [RuCl₂(PPh₃)₃] and [RuCl₂(DMSO)₄] (DMSO = dimethylsulphoxide) giving solid compounds of stochiometry [(Cp)₂Ti(-NCS)₂MCl₂] (M = Cu, Pd or Pt), [(Cp)₂Ti(-NCS)₂CuCl(PPh₃)], [(Cp)₂Ti(-NCS)₂-RuCl(PPh₃)₂]Cl and [(Cp)₂Ti(-NCS)₂RuCl₂(DMSO)2]. These products have been characterized by physicochemical and spectroscopic methods.