用于高数值孔径物镜的可调光瞳滤波器

根据矢量衍射理论，提出了一种用于提高高数值孔径显微物镜纵向分辨率的可调二元环形光瞳滤波器，通过改变滤波器的环半径获得不同的纵向分辨率，并利用共焦显微术点扩散函数的乘积性大大地降低了旁瓣相对主瓣的比值。模拟结果表明，这种新型滤波器不仅可以提高高数值孔径物镜的纵向分辨率，同时基本上不影响横向分辨率。     

Novel optical film sensor design based on p-polarized reflectance

A new scheme of optical film sensor is presented. The sensor is based on p-polarized reflectance, consisting of a sensing coated substrate, is easily optimized for maximum sensitivity in different applications. The resolutions of refractive index n_f, extinction coefficient k_f and thickness h_f of the sensitive films are predicted to be 10⁻⁷, 10⁻⁵ and 10⁻³ nm, respectively. Experimentally, we selected the sol–gel derived SnO₂ films as gas-sensitive films and conducted preliminary gas-sensing test. The results indicate that novel optical film sensor scheme has higher sensitivity, and the detection sensitivity is available to 10⁻¹ ppm on the condition of optimum optical parameters and incident angle.     

Investigation of charge effects on poling and stability for corona-poled polymer films

The optimal corona-poling temperature of polymer films was accurately determined by measuring the temperature dependence of the in situ second-harmonic (SH) intensity profile under the applied poling electric field. The in situ SH intensity profile was first measured by probing both the surface voltages and the poling currents induced by surface/space charges for the corona-poled polymer films. Moreover, charge effects on the stability of the chromophore orientation were first studied by using the thermally stimulated discharge-current technique. PACS 72.20.Jv; 42.65.Ky; 73.61.Ph; 81.40.Tv     

酞菁钴薄膜的折射率及吸收特性

通过真空镀法在单晶硅片上制备了酞菁钴薄膜，在波长扫描和入射角可变全自动椭圆偏振光谱仪上研究了ＣｏＰｃ薄膜的椭偏光谱并分析了其电子结构。     

聚4—氨基联苯溶液的性质

本文报导了聚4-氨基联苯的电化学合成,测定了它的ESR、IR及紫外可见光谱。聚合物在THF、DMF和DMSO中能全部溶解。界面移动法测得聚4-氨基联苯的DMF饱和溶液中正离子的迁移率为1.48×10~(-8)m~2·S~(-1)·V~(-1)。     

一些高Tc超导体的弹性性质

 本文用超声相比较方法测定了高T_c超导体La_1.85Sr_0.15CuO₄，La₂CuO₄和YBa₂Cu₃O₇的纵波和横波声速，进而导出了它们的纵向模量、切变模量、杨氏模量、泊松比、德拜温度及定体比热。在La_1.85Sr_0.15CuO₄样品上，还进行了压力实验，发现所有弹性模量都是随压强增加而增加。定体比热c_V和泊松比σ在高压下则略有下降。德拜温度是随压强增加而增加的。     

Symmetric Hilbert spaces arising from species of structures

Symmetric Hilbert spaces such as the bosonic and the fermionic Fock spaces over some lsquo;one particle space’ are formed by certain symmetrization procedures performed on the full Fock space. We investigate alternative ways of symmetrization by building on Joyal's notion of a combinatorial species. Any such species F gives rise to an endofunctor of the category of Hilbert spaces with contractions mapping a Hilbert space to a symmetric Hilbert space with the same symmetry as the species F. A general framework for annihilation and creation operators on these spaces is developed, and compared to the generalised Brownian motions of R. Speicher and M. Bożejko. As a corollary we find that the commutation relation with admits a realization on a symmetric Hilbert space whenever f has a power series with infinite radius of convergence and positive coefficients. Received: 7 April 2000; in final form: 28 November 2000 / Published online: 19 October 2001     

Singlewall carbon nanotubes covered with polystyrene nanoparticles by in‐situ miniemulsion polymerization

This work is to make carbon nanotubes dispersible in both water and organic solvents without oxidation and cutting nanotube threads. Polystyrene‐singlewall carbon nanotube (PS‐SWNT) composites were prepared with three different methods: miniemulsion polymerization, conventional emulsion polymerization, and mixing SWNT with PS latex. The two factors, crosslinking and surface coverage of PS are important factors for the mechanical and electrical properties, including dispersion states of SWNT in various solvents. The PS‐SWNT composite prepared via a conventional emulsion polymerization showed SWNT bundles entirely covered with PS, whereas the PS‐SWNT composite prepared via a miniemulsion polymerization showed SWNT partially covered with crosslinked PS nanoparticles. The method of mixing SWNTs with PS latex did not show the well dispersed state of carbon nanotubes because PS was not crosslinked and was dissolved in a solvent, and nanotubes separated from PS precipitated. So the PS nanoparticle‐SWNT composite had lower electrical resistance, and higher mechanical strength than the other composites made by the latter two methods. As the amount of SWNT increases, the bare surface area of SWNT increases and the electrical conductivity increases in the composite made by the miniemulsion polymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 573–584, 2006