Switching from linear to cyclic δ‐Polyvalerolactone synthesized via zeolitic imidazolate framework as a catalyst: A promising approach

A series of spray dried zeolitic imidazolate frameworks (ZIFs = ZIF‐8, ZIF‐67, and Zn/Co‐ZIF) are used as a catalyst for the bulk ring‐opening polymerization of δ‐valerolactone without any co‐catalyst to generate polyvalerolactone. Interestingly, using the same catalyst under the same reaction conditions could manipulate the structure of the product polymer, and thus its physical properties. Thus, using a dried substrate leads to the formation of the cyclic polymer while a linear polymer was formed on using the commercially available substrate. An activated monomer mechanism has been suggested where the propagating zinc alkoxide undergoes an intramolecular transesterification to release cyclic or linear polyvalerolactone. The ROP of δ‐VL without drying shows that the polymeric zwitterions have little tendency to cyclize in the presence of moisture. At 140 °C, ZIF‐8 shows a superior catalytic activity resulting in the production of cyclic polyvalerolactone having a high molecular weight as compared to ZIF‐67 or Zn/Co‐ZIF due to the presence of highly active sites. The catalyst could be recycled and reused without any significant loss of catalytic activity.     

温和条件下金属双氮杂环卡宾配合物催化CO2直接转化为炔酸的高效均相羧化反应

近年来,催化CO2合成精细化学品的研究备受关注。本研究在温和条件下利用金属双氮杂环卡宾催化剂实现CO2与末端炔烃的直接羧化反应,并提出合理的催化机理。首先,合成制备了铜基、银基两种金属双氮杂环卡宾催化剂,实验证明银双氮杂环卡宾配合物具有较好催化活性。通过改变环境条件和底物种类,对反应条件及催化剂底物适应性进行了探究,利用核磁共振谱仪表征产物分子结构并计算直接羧化反应的催化产率。结果表明,适宜催化条件为:1.2eq Cs2CO3作为添加剂、1大气压、室温、无水溶剂和1(mmol)%催化剂用量。银基金属催化剂活性较铜基催化剂高并具有广泛的底物适应性,对苯乙炔的催化产率高达93%;对乙炔气体同样具有良好的催化活性。此类催化剂具有优良的催化活性,能催化合成丙炔酸等重要医药中间体,在工业应用上具有极大潜力和广阔前景。     

Interaction Between DNA and Some Salicylic Acid Derivatives and Characterization of Their DNA Targets

A nanofiber polypyrrole (PPy) film was electrochemically deposited on a Pt electrode and used for immobilization of single‐stranded DNA (ssDNA) and investigation of hybridization events. Then, the interaction of DNA with four salicylic acid (SA) derivatives was studied with electrochemical methods. The oxidation peak of guanine was decreased by increasing the concentrations of salicylic acid derivatives. The binding constants of these compounds with four different sequences of DNA including different percentages of guanine‐cytosine and adenine‐thymine bases were calculated and it was clarified that sequences with higher percentage of adenine‐thymine bases have a higher binding constant in their interaction with SA derivatives.     

Hyperconjugative interactions are the main responsible for the anomeric effect: a direct relationship between the hyperconjugative anomeric effect,global hardness and zero-point energy

The correlations between the global hardness (η), hyperconjugative anomeric effect, Pauli exchange-type repulsions, electrostatic model associated with dipole–dipole interaction and structural parameters in 2-fluorotetrahydropyran, -thiopyran, -selenopyran (1–3) and their chloro- (4–6) and bromo-analogs (7–9) were investigated by means of the conventional and range-corrected functionals and natural bond orbital (NBO) interpretation. By deletion of the HC-exo-AE and HC-endo-AE, the equatorial conformations of compounds 1–9 become more stable than their corresponding axial forms, revealing that anomeric relationships in compounds 1–9 have the hyperconjugative anomeric effect origins while the electrostatic model associated with dipole–dipole interaction does not play a determining role on the variations of the anomeric relationships in these compounds. The anomeric relationships in compounds 1–3 have no Pauli exchange-type repulsions origin, but it has a significant impact on the conformational preferences in compounds 4–6 and 7–9. A canonical molecular orbital interpretation was conducted to investigate the correlations between the linear combinations of natural bond orbitals in the HOMOs, LUMOs and the global hardness (η) values. There is a direct relationship between the hyperconjugative anomeric effect, global hardness (η) and zero-point energies in compounds 1–3, 4–6 and 7–9. The harder axial conformations with the greater hyperconjugative anomeric effect and zero-point energy values are more stable than their corresponding equatorial forms.     

Green synthesis of pyrrolo isoquinolines using in situ synthesis of 4-hydroxycumarines: Study of antioxidant activity

In this research, synthesis of pyrrolo isoquinoline derivatives in excellent yields was performed using the multicomponent reaction of isoquinoline, alkyl bromides, 2-hydroxyacetophenone, or its derivatives, dimethyl carbonate as a green reagent and KF/clinoptinolite nanoparticles as a catalyst in the aqueous media at 80°C. The Punica granatum peel water extract was used as the green media for the synthesis of PG-KF/clinoptilolite nanoparticles in high yield. The PG-KF/clinoptilolite nanoparticles show a significant basic catalytic role in these reactions in preparing the product in high yield and used for several times. In addition, for studying the antioxidant ability of some of the synthesized compounds, diphenyl-picrylhydrazine (DPPH) radical trapping and power of ferric reduction tests are employed. The short time of the reaction, high yields of the product, easy separation of the catalyst and products are some of the advantages of this procedure.     

A Novel Hydrogen Peroxide Sensor Based on the Direct Electron Transfer of Catalase Immobilized on Nano‐Sized NiO/MWCNTs Composite Film

MWCNTs‐nanoNiO composite was used as a glassy carbon electrode modifier for construction of a novel catalase nanobiosensor for hydrogen peroxide. The immobilized catalase exhibited excellent electrocatalytic activity towards the reduction of H₂O₂. The resulting amperometric biosensor exhibited a linear response over a concentration range of 200 µM to 2.53 mM with a low detection limit of 19.0 µM. Electrochemical impedance measurements revealed that the modified electrode can be used for the sensitive detection of H₂O₂. The charge transfer resistance found to decrease significantly after enzymatic reaction of nanobiosensor with H₂O₂. The resulting impedance was highly sensitive to H₂O₂ over a linear range of 19–170 nM with a detection limit of 2.4 nM.     

Nitrogen doped nano porous graphene as a sorbent for separation and preconcentration trace amounts of Pb,Cd and Cr by Ultrasonic assisted in‐syringe dispersive micro solid phase extraction

Nitrogen doped nano porous graphene was used as an efficient sorbent in solid‐phase extraction process for simultaneous separation and pre‐concentration of metal ions lead (II), cadmium(II), and chromium(III)) in biological samples. Ultrasonic assisted in‐syringe dispersive micro solid phase extraction coupled with micro sampling atomic absorption spectrometry was utilized for the determination of metal ions. Nitrogen doped nano porous graphene was synthesized as a nano sorbent by chemical vapour deposition method. Methane and aniline were used as carbon and nitrogen sources. The characterization of sorbent was performed by field emission scanning electron microscope, transmission electron microscopy, atomic force microscope, fourier transform infrared, chemical element analysis and raman analysis. Effective parameters on the extraction efficiency such as pH, sorbent dosage, eluent volume and eluent concentration were optimized by central composite design and desirability function. Experimental results indicate that the optimal conditions for this extraction were pH = 6.4, 1.42 mg of sorbent, 100 μL of eluent, and 0.84 mol L^‐1 of eluent concentration. The detection limits are as low as 1.5, 0.3 and 0.9 μg L^‐1 for lead, cadmium, and chromium, respectively. The intra‐day precisions were 3.6, 4.38 and 2.94 and Inter‐day precision were 4.83, 5.26 and 4.52 for lead, cadmium, and chromium, respectively. Method performance was investigated by determination of mentioned heavy metals in complicated biological matrixes such as human plasma, urine and saliva samples with good recoveries.     

PVT properties of imidazolium-, phosphonium-, pyridinium- and pyrrolidinium-based ionic liquids using critical point constants

Song and Mason equation of state (EOS) with a simple modification has been extended to modelling PVT properties of ionic liquids (ILs). The considered ILs are [C₁mim][MeSO4], [C₁mim][CH₃OC₂H₅SO₄], [C₁mim][(CH₃)₂PO₄], [C₂mim][MeSO4], [C₂mim][BF₄], [C₂mim][SCN], [C₂eim][NTf₂], [C₄mim][C(CN)₃], [C₄mim][CF₃SO₃], [C₄mim][SCN], [C₅mim][NTf₂], [C₈mim][NTf₂], [(C₆H₁₃)₃P(C₁₄H₂₉)][Cl], [(C₆H₁₃)₃P(C₁₄H₂₉)][NTf₂], [(C₆H₁₃)₃P(C₁₄H₂₉)][Ac], [C₃mpyr][NTf₂], [C₄mpyr][NTf₂] and [Py][C₂H₅OC₂H₄SO₄]. Three temperature-dependent parameters in the proposed EOS have been scaled as functions of reduced temperature with the use of the law of corresponding states. It is shown that the knowledge of just critical temperature and critical density is sufficient to predict the PVT properties of these ILs. The overall average absolute deviation of calculated densities from literature values for 1347 data points of 18 ILs was found to be 0.58%. The predicted density of ILs from proposed EOS has been compared with those obtained by other literature work. Moreover, we indicate that the Zeno line regularity can well be predicted by proposed model for ILs.     

Viscoelastic characterization of compacted pharmaceutical excipient materials by analysis of frequency-dependent mechanical relaxation processes

A newly developed method for determining the frequency-dependent complex Young's modulus was employed to analyze the mechanical response of compacted microcrystalline cellulose, sorbitol, ethyl cellulose and starch for frequencies up to 20 kHz. A Debye-like relaxation was observed in all the studied pharmaceutical excipient materials and a comparison with corresponding dielectric spectroscopy data was made. The location in frequency of the relaxation peak was shown to correlate to the measured tensile strength of the tablets, and the relaxation was interpreted as the vibrational response of the interparticle hydrogen and van der Waals bindings in the tablets. Further, the measured relaxation strength, holding information about the energy loss involved in the relaxation processes, showed that the weakest material in terms of tensile strength, starch, is the material among the four tested ones that is able to absorb the most energy within its structure when exposed to external perturbations inducing vibrations in the studied frequency range. The results indicate that mechanical relaxation analysis performed over relatively broad frequency ranges should be useful for predicting material properties of importance for the functionality of a material in applications such as, e.g., drug delivery, drug storage and handling, and also for clarifying the origin of hitherto unexplained molecular processes.