Explicitly correlated MRCI-F12 potential energy surfaces for methane fit with several permutation invariant schemes and full-dimensional vibrational calculations

A data-set of nearly 100,000 symmetry unique multi-configurational ab initio points for methane were generated at the (AE)-MRCI-F12(Q)/CVQZ-F12 level, including energies beyond 30,000 cm^?1 above the minimum and fit into potential energy surfaces (PESs) by several permutation invariant schemes. A multi-expansion interpolative fit combining interpolating moving least squares (IMLS) fitting and permutation invariant polynomials (PIP) was able to fit the complete data-set to a root-mean-square deviation of 1.0 cm^?1 and thus was used to benchmark the other fitting methods. The other fitting methods include a single PIP expansion and two neural network (NN) based approaches, one of which combines NN with PIP. Full-dimensional variational vibrational calculations using a contracted-iterative method (and a Lanczos eigensolver) were used to assess the spectroscopic accuracy of the electronic structure method. The results show that the NN-based fitting approaches are able to fit the data-set remarkably accurately with the PIP–NN method producing levels in remarkably close agreement with the PIP–IMLS benchmark. The (AE)-MRCI-F12(Q)/CVQZ-F12 electronic structure method produces vibrational levels of near spectroscopic accuracy and a superb equilibrium geometry. The levels are systematically slightly too high, beginning at ～ 1–2 cm^?1 above the fundamentals and becoming correspondingly higher for overtones. The PES is therefore suitable for small ab initio or empirical corrections and since it is based on a multi-reference method, can be extended to represent dynamically relevant dissociation channels.     

Determination of trace elements in biological samples treated with formic acid by inductively coupled plasma mass spectrometry using a microconcentric nebulizer

A simple and fast method for the determination of As, Ba, Cd, Co, Cu, Fe, Ga, Mn, Mo, Ni, Pb, Rb, Se, Sr, Tl, U, V and Zn in biological samples by inductively coupled plasma mass spectrometry (ICP-MS), after sample solubilization with formic acid and introduction by a microconcentric nebulizer, is proposed. The sample is mixed with formic acid, kept at 90 °C for one hour and then diluted with nitric acid aqueous solution to a 50% v/v formic acid and 1% v/v nitric acid final concentrations. The final sample solution flow rate for introduction into the plasma was 30 μL min⁻¹. The optimized and adopted nebulizer gas flow rate was 0.7 L min⁻¹ and RF power was 800 W. These conditions are very different than those normally used when a conventional nebulizer is employed. Rodhium was used as internal standard. External calibration against aqueous standard solutions, without formic acid, could be used for quantification, except for As, Se and Zn. However, external calibration with 50% formic acid allows the determination of all analytes with high accuracy and it is recommended. The detection limits were between 0.0005 (Tl) and 0.22 mg kg⁻¹ (Fe) and the precision expressed by the relative standard deviations (RSD) were between 0.2% (Sr) and 3.5% (Ga). Accuracy was validated by the analysis of four certified reference biological materials of animal tissues, comparing the results by linear regressions and by the t-test at a 95% confidence level. The recommended procedure avoids plasma instability and carbon deposit on the cones.     

Mapping the Transformation [{RuII(CO)3Cl2}2]→[RuI2(CO)4]2+: Implications in Binuclear Water–Gas Shift Chemistry

The complete sequence of reactions in the base‐promoted reduction of [{Ru^II(CO)₃Cl₂}₂] to [Ru^I₂(CO)₄]²⁺ has been unraveled. Several μ‐OH, μ:κ²‐CO₂H‐bridged diruthenium(II) complexes have been synthesized; they are the direct results of the nucleophilic activation of metal‐coordinated carbonyls by hydroxides. The isolated compounds are [Ru₂(CO)₄(μ:κ²‐C,O‐CO₂H)₂(μ‐OH)(NP^F‐Am)₂][PF₆] ( 1 ; NP^F‐Am=2‐amino‐5,7‐trifluoromethyl‐1,8‐naphthyridine) and [Ru₂(CO)₄(μ:κ²‐C,O‐CO₂H)(μ‐OH)(NP‐Me₂)₂][BF₄]₂ ( 2 ), secured by the applications of naphthyridine derivatives. In the absence of any capping ligand, a tetranuclear complex [Ru₄(CO)₈(H₂O)₂(μ³‐OH)₂(μ:κ²‐C,O‐CO₂H)₄][CF₃SO₃]₂ ( 3 ) is isolated. The bridging hydroxido ligand in 1 is readily replaced by a π‐donor chlorido ligand, which results in [Ru₂(CO)₄(μ:κ²‐C,O‐CO₂H)₂(μ‐Cl)(NP‐PhOMe)₂][BF₄] ( 4 ). The production of [Ru₂(CO)₄]²⁺ has been attributed to the thermally induced decarboxylation of a bis(hydroxycarbonyl)–diruthenium(II) complex to a dihydrido–diruthenium(II) species, followed by dinuclear reductive elimination of molecular hydrogen with the concomitant formation of the Ru^I? Ru^I single bond. This work was originally instituted to find a reliable synthetic protocol for the [Ru₂(CO)₄(CH₃CN)₆]²⁺ precursor. It is herein prescribed that at least four equivalents of base, complete removal of chlorido ligands by Tl^I salts, and heating at reflux in acetonitrile for a period of four hours are the conditions for the optimal conversion. Premature quenching of the reaction resulted in the isolation of a trinuclear Ru^I₂Ru^II complex [{Ru(NP‐Am)₂(CO)}{Ru₂(NP‐Am)₂(CO)₂(μ‐CO)₂}(μ₃:κ³‐C,O,O′‐CO₂)][BF₄]₂ ( 6 ). These unprecedented diruthenium compounds are the dinuclear congeners of the water–gas shift (WGS) intermediates. The possibility of a dinuclear pathway eliminates the inherent contradiction of pH demands in the WGS catalytic cycle in an alkaline medium. A cooperative binuclear elimination could be a viable route for hydrogen production in WGS chemistry.     

Deposition and characterization of TiAlSiN nanocomposite coatings prepared by reactive pulsed direct current unbalanced magnetron sputtering

This work reports the performance of high speed steel drill bits coated with TiAlSiN nanocomposite coating at different Si contents (5.5-8.1 at.%) prepared using a four-cathode reactive pulsed direct current unbalanced magnetron sputtering system. The surface morphology of the as-deposited coatings was characterized using field emission scanning electron microscopy. The crystallographic structure, chemical composition and bonding structure were evaluated using X-ray diffraction, energy-dispersive X-ray analysis, X-ray photoelectron spectroscopy, respectively. The corrosion behavior, mechanical properties and thermal stability of TiAlSiN nanocomposite coatings were also studied using potentiodynamic polarization, nanoindentation and Raman spectroscopy, respectively. The TiAlSiN coating thickness was approximately 2.5-2.9 μm. These coatings exhibited a maximum hardness of 38 GPa at a silicon content of approximately 6.9 at.% and were stable in air up to 850 °C. For the performance evaluation, the TiAlSiN coated drills were tested under accelerated machining conditions by drilling a 12 mm thick 304 stainless steel plate. Under dry conditions the uncoated drill bits failed after drilling 50 holes, whereas, TiAlSiN coated drill bits (Si = 5.5 at.%) drilled 714 holes before failure. Results indicated that for TiAlSiN coated drill bits the tool life increased by a factor of more than 14.     

Determination of organochlorine pesticides in water samples by dispersive liquid-liquid microextraction coupled to gas chromatography-mass spectrometry

A rapid and simple dispersive liquid-liquid microextraction (DLLME) has been developed to preconcentrate eighteen organochlorine pesticides (OCPs) from water samples prior to analysis by gas chromatography-mass spectrometry (GC-MS). The studied variables were extraction solvent type and volume, disperser solvent type and volume, aqueous sample volume and temperature. The optimum experimental conditions of the proposed DLLME method were: a mixture of 10 μL tetrachloroethylene (extraction solvent) and 1 mL acetone (disperser solvent) exposed for 30 s to 10 mL of the aqueous sample at room temperature (20 °C). Centrifugation of cloudy solution was carried out at 2300 rpm for 3 min to allow phases separation. Finally, 2 μL of extractant was recovered and injected into the GC-MS instrument. Under the optimum conditions, the enrichment factors ranged between 46 and 316. The calculated calibration curves gave a high-level linearity for all target analytes with correlation coefficients ranging between 0.9967 and 0.9999. The repeatability of the proposed method, expressed as relative standard deviation, varied between 5% and 15% (n = 8), and the detection limits were in the range of 1-25 ng L⁻¹. The LOD values obtained are able to detect these OCPs in aqueous matrices as required by EPA methods 525.2 and 625. Analysis of spiked real water samples revealed that the matrix had no effect on extraction for river, surface and tap waters; however, urban wastewater sample shown a little effect for five out of eighteen analytes.     

Dirac’s Theorem on Simplicial Matroids

We introduce the notion of k-hyperclique complexes, i.e., the largest simplicial complexes on the set [n] with a fixed k-skeleton. These simplicial complexes are a higher-dimensional analogue of clique (or flag) complexes (case k = 2) and they are a rich new class of simplicial complexes. We show that Dirac’s theorem on chordal graphs has a higher-dimensional analogue in which graphs and clique complexes get replaced, respectively, by simplicial matroids and k-hyperclique complexes. We prove also a higher-dimensional analogue of Stanley’s reformulation of Dirac’s theorem on chordal graphs.