Syntheses and electrical conductivity of polyamides containing tetrathiafulvalene moieties in the main chain

Novel polyamides that contain tetrathiafulvalene (TTF) moieties were synthesized by direct polycondensation of Δ^2,2′ -bi-1,3-dithiole-4,4′(5′)-dicarboxylic acid with aromatic diamines in the presence of triphenylphosphine, hexachloroethane, and pyridine. Complexes of these polyamides with bromine were TTF cation radical () salts which resulted from the charge transfer of TTF moieties to bromine. The electrical conductivity of undoped polyamides increased with a decrease in diamine length. By doping the bromine the conductivity of the polyamides was enhanced by 3–5 orders of magnitude and reached 10^?5–;10^?9S cm^?1. Maximum conductivity was observed at the doping ratio of [Br]/[repeat unit] < 1. The electrical conduction in the bromine complexes may be attributed to the hopping of odd electrons of between TTF moieties.     

alpha-Aminoallylation of aldehydes with ammonia: stereoselective synthesis of homoallylic primary amines

Three-component reactions of aldehydes, ammonia, and allylboronates were found to provide homoallylic primary amines in high yields with high chemo- and stereoselectivities. A two-step, one-pot, stereoselective synthesis of an uncommon alpha-amino acid, alloisoleucine, was achieved utilizing this reaction.     

Dehydration reactions in water. Brønsted Acid-surfactant-combined catalyst for ester,ether, thioether,and dithioacetal formation in water

Dehydration reactions in water have been realized by a surfactant-type catalyst, dodecylbenzenesulfonic acid (DBSA). These reactions include dehydrative esterification, etherification, thioetherification, and dithioacetalization. In these reactions, DBSA and substrates form emulsion droplets whose interior is hydrophobic enough to exclude water molecules generated during the reactions. Detailed studies on the esterification revealed that the yields of esters were affected by temperature, amounts of DBSA used, and the substrates. Esters were obtained in high yields for highly hydrophobic substrates. On the basis of the difference in hydrophobicity of the substrates, unique selective esterification and etherification in water were attained. Furthermore, chemospecific, three-component reactions under DBSA-catalyzed conditions were also found to proceed smoothly. This work not only may lead to environmentally benign systems but also will provide a new aspect of organic chemistry in water.     

Enhanced indoor radon concentration by using radon-rich well water in a Japanese wooden house in Fukuoka, Japan

Summary Radon measurements were carried out in a Japanese wooden house built on granitic geology, where radon-rich well water is used. Atmospheric radon concentrations were measured over one year with passive integrated radon monitors. The monitors were distributed at several locations in the house and were replaced every two months. In order to confirm the diurnal variation and heterogeneous distribution of radon, short-term measurements were carried out accordingly. Radon, its decay products and terrestrial gamma-radiations were measured in this survey. From the long-term measurement, the radon concentration in the house ranged from 14 to 184 Bq^. m^-3with an arithmetic mean of 45 Bq^. m^-3. A radon concentration of 184 Bq^. m^-3was observed in the bathroom in spring (March-May) though the radon level was normal in the living room and bedroom. In order to characterize the house, similar measurements were conducted in several surrounding houses. There was a significant difference in radon concentration between the investigated houses. There was a spatial distribution of the radon concentration and the highest value was found in the bathroom. Radon and its decay products concentrations varied with time, which increased from midnight to morning whereas they decreased during daytime. Although the radon concentration in tap water was 1 Bq^. l^-1, a high level of 353 Bq^. l^-1was found in the well water.While well water was being used, the indoor radon concentration near the bathroom increased rapidly with a maximum value of 964 Bq^. m^-3. It is clear that the use of well water enhanced the radon level around the bathroom.     

Evaluation of thyroid scintigraphy in small animals

Thyroid scintigraphy in rats and mice with 99mTc and 123I was attempted to examine whether this modality might be used in small animals and to describe the possibilities of its application in examining experimentally produced thyroid diseases. A human gamma camera with a pinhole collimator improved for small animals was used for imaging. Thyroid images with 99mTc were obtained 20 minutes after injection and those with 123I were 24 hours after administration. All the scintigrams, although those obtained from mice with 99mTc displayed overlapped salivary gland images, demonstrated sufficiently clear images in size and shape, which showed that thyroid scintigraphy in small animals should be applicable in examining experimentally produced thyroid diseases.     

Copolymerization of butadiene and styrene with a gadolinium tricarboxylate catalyst

Homo- and copolymerizations of butadiene (BD) and styrene (St) were carried out by gadolinium catalysts having various tricarboxylate ligands [Gd(OCOR)₃: R = CH₃, CH₂Cl, CHCl₂, CCl₃, and CF₃], to investigate the effects of ligands and discuss the cis polymerization mechanism. Polymerization of BD with Gd(OCOR)₃—(i—Bu)₃Al—Et₂AlCl catalysts was carried out in hexane at 50°C. By each catalyst, poly(BD) having a high cis content (cis = 97–99%) in 22–85% yields for 2–24 h were obtained. The ligands with low pKa values increased the polymerization activity as follows: R of Gd(OCOR)₃: CF₃ > CCl₃ > CHCl₂ > CH₂Cl ～ CH₃. On the other hand, in the polymerization of St or copolymerization of BD and St under similar conditions, the highest activity was attained by a Gd(OCOCCI₃)₃- based catalyst. The difference in the optimum ligand among the homo- and copolymerization of BD and St was discussed on the basis of energy levels of the catalysts. In the copolymers of BD and St, the cis-1,4 content of the BD unit decreased with increasing St content. Furthermore, according to the diad analysis of copolymers (St content ～ 14.5 mol %) by ¹³C NMR spectroscopy, the low cis value of the BD unit was observed in the St-BD diad (cis/trans/vinyl = 24/53/23), while the high cis value of the BD unit remained in the BD-BD diad (cis/trans/vinyl = 89/10/1). These results suggest that the terminal BD unit is controlled by the cis configuration by the coordination between the penultimate cis vinylene unit and the gadolinium metal catalyst, whereas the presence of the penultimate St unit interferes with cis polymerization of the terminal BD unit. The difference in the coordination mechanism in the course of polymerization between rare earth metal and transition metal catalysts such as the Ni(acac)₂ and Co(acac)₃-based catalyst was also discussed. © 1995 John Wiley & Sons, Inc.     

Oxysulfide Sm(2)Ti(2)S(2)O(5) as a stable photocatalyst for water oxidation and reduction under visible light irradiation (lambda < or = 650 nm)

A Ti-based oxysulfide, Sm(2)Ti(2)S(2)O(5), was studied as a visible light-driven photocatalyst. Under visible light (440 nm < or = lambda < or = 650 nm) irradiation, Sm(2)Ti(2)S(2)O(5) with a band gap of approximately 2 eV evolved H(2) or O(2) from aqueous solutions containing a sacrificial electron donor (Na(2)S-Na(2)SO(3) or methanol) or acceptor (Ag(+)) without any noticeable degradation. This oxysulfide is, therefore, a stable photocatalyst with strong reduction and oxidation abilities under visible-light irradiation. The electronic band structure of Sm(2)Ti(2)S(2)O(5) was calculated using the plane-wave-based density functional theory (DFT) program. It was elucidated that the S3p orbitals constitute the upper part of the valence band and these orbitals make an essential contribution to the small band gap energy. The conduction and valence bands' positions of Sm(2)Ti(2)S(2)O(5) were also determined by electrochemical measurements. It indicated that conduction and valence bands were found to have satisfactory potentials for the reduction of H(+) to H(2) and the oxidation of H(2)O to O(2) at pH = 8. This is consistent with the results of the photocatalytic reactions.     

Diffusion coefficients of positronium in polycarbonate at low temperatures

Diffusion coefficients of positronium (Ps) in polycarbonate (PC) have been determined at temperatures between 20 and 300 K by means of positron lifetime spectroscopy. 2,2-dinitrobiphenyl (DNB) was added to the polymer as a Ps quencher and the diffusion coefficients were determined from measured Ps quenching rate constants, assuming that the reaction between Ps and DNB is completely diffusion-controlled.     

A fundamental and clinical study of ferritin 'Eiken' radioimmunoassay kit

We have measured serum ferritin level using double antibody radioimmunoassay kit (Eiken ICL) and evaluated the characteristics of the kit and clinical usefulness. Satisfactory results were observed in standard curve, reproducibility, dilution and recovery test. In clinical evaluation, we have measured in normal subjects and patients with various diseases. The range in normal males and females were 13.0-158.7 ng/ml and 7.3-73.0 ng/ml, respectively. Serum ferritin level was elevated in patients with hepatoma, biliary cancer, lung cancer and other malignant diseases. Measurement of serum ferritin value would be useful in the monitoring of cancer patients.     

Relationship between symmetry of porphyrinic pi-conjugated systems and singlet oxygen (1Delta g) yields: low-symmetry tetraazaporphyrin derivatives

We have investigated the excited-state properties and singlet oxygen ((1)Delta(g)) generation mechanism in phthalocyanines (4M; M = H(2), Mg, or Zn) and in low-symmetry metal-free, magnesium, and zinc tetraazaporphyrins (TAPs), that is, monobenzo-substituted (1M), adjacently dibenzo-substituted (2AdM), oppositely dibenzo-substituted (2OpM), and tribenzo-substituted (3M) TAP derivatives, whose pi conjugated systems were altered by fusing benzo rings. The S(1)(x) and S(1)(y) states (these lowest excited singlet states are degenerate in D(4)(h) symmetry) split in the low-symmetry TAP derivatives. The excited-state energies were quantitatively determined from the electronic absorption spectra. The lowest excited triplet (T(1)(x)) energies were also determined from phosphorescence spectra, while the second lowest excited triplet (T(1)(y)) states were evaluated by using the energy splitting between the T(1)(x) and T(1)(y) states previously reported (Miwa, H.; Ishii, K.; Kobayashi, N. Chem. Eur. J. 2004, 10, 4422-4435). The singlet oxygen quantum yields (Phi(Delta)) are strongly dependent on the pi conjugated system. In particular, while the Phi(Delta) value of 2AdH(2) is smallest in our system, that of 2OpH(2), an isomer of 2AdH(2), is larger than that of 4Zn, in contrast to the heavy atom effect. The relationship between the molecular structure and Phi(Delta) values can be transformed into a relationship between the S(1)(x) --> T(1)(y) intersystem crossing rate constant (k(ISC)) and the energy difference between the S(1)(x) and T(1)(y) states (DeltaE(S)(x)(T)(y)). In each of the Zn, Mg, and metal-free compounds, the Phi(Delta)/tau(F) values (tau(F): fluorescence lifetime), which are related to the k(ISC) values, are proportional to exp(-DeltaE(S)(x)(T)(y)), indicating that singlet oxygen ((1)Delta(g)) is produced via the T(1)(y) state and that the S(1)(x) --> T(1)(y) ISC process follows the energy-gap law. From the viewpoint of photodynamic therapy, our methodology, where the Phi(Delta) value can be controlled by changing the symmetry of pi conjugated systems without heavy elements, appears useful for preparing novel photosensitizers.