Production of high-current large-area H- beams by abucket-type ion source equipped with a magnetic filter

A negative-ion-based neutral beam injection (NBI) system is planned for plasma heating of the Large Helical Device (LHD). We have developed a negative ion source, which is 1/3 the scale of the source for the NBI. A magnetic filter held was generated by external permanent magnets to lower the electron temperature in a large-area bucket plasma source (35 cm×62 cm) for efficient H^- production. We investigated the magnetic field configuration and found a low electron temperature high density plasma (<1 eV, 10¹²/cm³) could be achieved with an optimized configuration, The filter strength (B_max=70 G, line-integral flux=780 G cm at the center axis of the source) was proved to be enough to lower the electron temperature below 1 eV at high arc discharge power (100 kW) and low pressure (0.4 Pa). We injected cesium vapor into the plasma source to enhance H^- production efficiency and obtained a 16.2-A H^- beam current (31 mA/cm², 47 kV) using a large-area, four-grid electrostatic extraction system (25 cm×50 cm). This satisfied the development target (>15 A: 1/3 current of LHD ion source). Based on the results, we are designing a negative ion source for the LHD     

Spin frustration in Y(Sc)Mn2

The relaxation rate of muon polarization of Y_0.97Sc_0.03Mn₂ with a magnetic lattice composed of corner‐shared tetrahedrons shows a broad peak around 2.5 K indicating a random spin freezing at low temperatures. The substitution by nonmagnetic Al atoms for 10% Mn atoms raises the spin freezing temperature to 45 K. The present work shows clearly that due to the strong geometrical frustration, the ground state of the system is singlet tetrahedrons mixed with frozen paramagnetic tetrahedrons. This revised version was published online in July 2006 with corrections to the Cover Date.     

Coupling of an atmospheric-samling ion source with an ion-trap mass spectrometer

An atomospheric-sampling glow-discharge ionization source has been interfaced with an ion-trap mass spectrometer. Under optimum conditions, the efficiency of ion injection is 1–5%. Several factors have a significant effect on the ion injection efficiency, including the voltages on the three-element lens system situated between the ion-source exit and the ion-trap entrance end-cap, the pressure of the bath gas present in the ion-trap vacuum housing, the nature of the bath gas and the amplitude of the radiofrequency voltage applied to the ring electrode during ion injection. Collision-induced dissociation (and electron detachment from anions) is also observed for some ions on injection, depending on the conditions. The most important experimental variables in determining the extent to which dissociation (or electron detachment) occurs are the nature of the bath gas, the bath gas presure and the radiofrequency voltage applied to the ring electrode during injection. These effects are illustrated with data obtained for polyatomic anions injected from the golw-discharge ion source.     

Linear Separability of Positive Self-Dual Logical Filters

The threshold logic filter is an important nonlinear filter class, which is defined by a threshold logic function of binary input values. It is proved in this paper that not all positive self-dual logical functions are threshold functions if the number of input variables is 5 or more. The positive self-dual logical filter is a limited class but includes almost all filters for noise removal. Our result means that not all positive self-dual filters can be expressed by one operation of the threshold logic filters. In the sense of the filter expression by neural networks, the two-layer network cannot always optimize even this limited class.     

Development and commercialization of ionic-type photosensitive polyimides

Toray's ionic-type photosensitive polyimide, “Photoneece”, is widely used as an interdielectric and as a protection layer for microelectronics, because of its properties, such as the removal of photoreactive groups at low temperature, excellent thermal, mechanical and electrical film properties and excellent adhesion to various substrates. Toray has developed a new type of “Photoneece”, UR-5100, which is a low-stress photosensitive polyimide. In addition to a low thermal expansion coefficient (25 ppm/°C), “Photoneece” UR-5100 also features high resolution with an aspect ratio of more than 2.0 in 40 μm imaged film, and excellent mechanical properties in the cured film such as high elongation (>20%) and tensile strength (>200 MPa), even after 60 hr heat treatment at 350°C. “Photoneece” UR-5100 can be applied in multichip modules (MCMs), hybrid circuits, ICs and LSIs. In this paper the characterization and processing of this “Photoneece” UR-5100 are described.     

High performance liquid chromatography of biological polyamines using immobilized enzyme as post-column reactor followed by electrochemical detection

A novel analytical method for biological polyamines (putrescine, spermidine and spermine) was developed. Polyamines were separated by ion-pair reversed phase chromatography using a polymer-based octadecyl bonded column. A polyamine oxidase immobilized column worked effectively as a post-column reactor to convert polyamines to hydrogen peroxide which was eventually detected by electrochemical oxidation on platinum electrode. This method required neither tedious derivatization nor gradient elution, permitting us to perform simple and rapid analysis of polyamines. The detection limits were 0.3, 0.6, and 4 pmol injected for putrescine, spermidine, and spermine, respectively with a linear range of two to three orders of magnitude. Chromatograms obtained with samples from human urine and rat brain homogenates demonstrated the high sensitivity and selectivity of the method.     

Spanning Trees Crossing Few Barriers

We consider the problem of finding low-cost spanning trees for sets of $n$ points in the plane, where the cost of a spanning tree is defined as the total number of intersections of tree edges with a given set of $m$ barriers. We obtain the following results: (i) if the barriers are possibly intersecting line segments, then there is always a spanning tree of cost $O(\min(m^2,m\sqrt{n}))$; (ii) if the barriers are disjoint line segments, then there is always a spanning tree of cost $O(m)$; (iii) ] if the barriers are disjoint convex objects, then there is always a spanning tree of cost $O(n+m)$. All our bounds are worst-case optimal, up to multiplicative constants.